Reducing water absorption of fiber-cement composites for exterior applications by crystal modification method

Authors

  • Parinya Chakartnarodom Department of Materials Engineering, Faculty of Engineering,Kasetsart University
  • Nuntaporn Kongkajun Department of Materials and Textile Technology, Faculty of Science and Technology,Thammasat University
  • Nutthita Chuankrerkkul Metallurgy and Materials Science Research Institute, Chulalongkorn University
  • Pitcharat Ineure Glass Bridge Company Limited
  • Wichit Prakaypan Shera Public Company Limited

DOI:

https://doi.org/10.55713/jmmm.v29i4.496

Keywords:

Crystal modification, Fiber-cement composites, Fiber-cement products, Water absorption, Exterior applications

Abstract

The aim of this work was to reduce the water absorption of the fiber-cement composites, which is also known as fiber-cement products, by the crystal modification of cement matrix using the additives including polyurethane-based corn starch–lithium perchlorate (LiClO4), and acrylic resin emulsion-based chitosan-silicate hybrid compound. To prepare the samples, the mixtures consisting Portland cement Type I, sand, cellulose fibers from pine trees, gypsum, and additive were mixed with water. The percentages of additive in the mixtures before mixing with water were 0.03 to 0.17 wt%. The green sheets of samples were formed by filter-pressing method, air cured for 1 day, and then autoclaved at 8 bars and 140°C for 12 h. The experimental results indicated that the water absorption of the samples was reduced when polyurethane-based corn starch–lithium perchlorate (LiClO4) was used as the additive due to the crystallization of the small crystals within cement matrix, while their mechanical properties including modulus of rupture (MOR) and modulus of elasticity (MOE) of the samples using this additive conform industrial standard.

Downloads

Download data is not yet available.

References

Shera Public Company Limited (2018), Project Reference. [image] Available at: https://www. Shera.com/th-en/project-reference [Accessed September 2018].

P. Chakartnarodom, W. Prakaypan, P. Ineure, N. Kongkajun, and N. Chuankrerkkul, “Feasibility study of using basalt fibers as the reinforcement phase in fiber-cement products,” Key Engineering Materials, vol. 766, pp. 252- 257, 2018.

S. Delvasto, E. F. Toro, F. Perdomo, and R. Mejía de Gutiérrez, “An appropriate vacuum technology for manufacture of corrugated fique fiber reinforced cementitious sheets,” Construction and Building Materials, vol. 24, pp. 187-192, 2010.

P. Chakartnarodom, W. Prakaypan, P. Ineure, N. Kongkajun, and N. Chuankrerkkul, “Formula of basalt fiber-reinforced cement board,” Thailand patent No.12440. Bangkok: Department of Intellectual Property, 2017.

C. Pandis, S. Madeira, J. Matos, A. Kyritsis, J. F. Mano, and J. L. G. Ribelles, “Chitosan– silica hybrid porous membranes,” Materials Science and Engineering: C, vol. 42, pp. 553- 561, 2014.

H. Honarkar and M. Barikani, “Applications of biopolymers I: chitosan,” Monatshefte für Chemie-Chemical Monthly, vol. 140, pp. 1403, 2009.

M. Lasheras-Zubiate, I. Navarro-Blasco, J. M. Fernández, and J. I. Alvarez, “Studies on chitosan as an admixture for cement-based materials: Assessment of its viscosity enhancing effect and complexing ability for heavy metals,” Journal of Applied Polymer Science, vol. 120, pp. 242-252, 2011.

A. Aryaei, J. Liu, A. H. Jayatissa, and J. A. Champa, “Cross-linked chitosan improves the mechanical properties of calcium phosphate– chitosan cement,” Materials Science and Engineering: C, vol. 54, pp. 14-19, 2015.

U. T. Bezerra, R. M. Ferreira, and J. P. CastroGomes, “The effect of latex and chitosan biopolymer on concrete properties and performance,” Key Engineering Materials, vol. 466, pp. 37-46, 2011.

Y. V. Ustinova and T. P. Nikiforova, “Cement compositions with the chitosan additive,” Procedia Engineering, vol. 153, pp. 810-815, 2016.

J. F. A. Carvalho, “7 - Starch: Major Sources, Properties and Applications as thermoplastic materials,” in Handbook of biopolymers and biodegradable plastics, ed. S. Ebnesajjad: William Andrew Publishing, 2013, pp. 129- 152.

X. S. Sun, “11 - Plastics derived from starch and poly (lactic acids),” in Bio-Based Polymers and Composites, eds R. P. Wool and X. S. Sun: Academic Press, 2005, pp. 369-410.

K. H. Teoh, S. Ramesh, and A. K. Arof, “Investigation on the effect of nanosilica towards corn starch–lithium perchlorate-based polymer electrolytes,” Journal of Solid State Electrochemistry, vol 16, pp. 3165-3170, 2012

A. Akindahunsi, H. C. Uzoegbo, and S. Iyuke, “Use of starch modified concrete as a repair material,” in 3rd International Conference on Repair, Rehabilitation and Retrofitting: Taylor & Francis Group, 2012, pp. 938-943

A. Akindahunsi, W. Schmidt, H. C. Uzoegbo, and S. Iyuke, “The influence of starches on some properties of concrete,” in International Conference on Advances in Cement and Concrete Technology in Africa, eds. H. C. Uzoegbo and W. Schmidt, pp. 637-645, 2013

L. Galvánková, J. Másilko, T. Solný, and E. Štěpánková, “Tobermorite synthesis under hydrothermal conditions,” Procedia Engineering, vol. 151, pp. 100-107, 2016

R. Dachowski and A. Stępień, “The impact of various additives on the microstructure of silicate products,” Procedia Engineering, vol. 21, pp. 1173-1178, 2011.

R. Dachowski and K. Komisarczyk, “Determination of microstructure and phase composition of sand-lime brick after autoclaving process,” Procedia Engineering, vol. 161, pp. 747-753, 2016.

D. R. Askeland, P. P. Fulay, and W. J. Wright, The science and engineering of materials. KY: CL Engineering, 2010.

ASTM C1185, “Standard test methods for sampling and testing non-asbestos fibercement flat sheet, roofing and siding shingles, and clapboards,” ASTM International, West Conshohocken, PA.

R. E. Walpole, R. H. Myers, S. L. Myers, and K. Ye, Probability and Statistics for Engineers and Scientists. New Jersey: Pearson, 2012.

M. A. Meyers and K. K. Chawla, Mechanical Behavior of Materials, Prentice-Hall, Inc., 1999.

Downloads

Published

2019-12-26

How to Cite

[1]
P. Chakartnarodom, N. Kongkajun, N. Chuankrerkkul, P. Ineure, and W. Prakaypan, “Reducing water absorption of fiber-cement composites for exterior applications by crystal modification method”, J Met Mater Miner, vol. 29, no. 4, Dec. 2019.

Issue

Section

Original Research Articles

Most read articles by the same author(s)

1 2 > >>