Transparent coating materials based on inorganic/organic composites

Authors

  • Kawee Srikulkit Department of Materials Science, Faculty of Science, Chulalongkorn University
  • Naparath Rojtinnakorn Department of Materials Science, Faculty of Science, Chulalongkorn University
  • Rajcharoj Charoensak Department of Materials Science, Faculty of Science, Chulalongkorn University

Abstract

A siloxyl group functionalized copolymer of low molecular weight was synthesized, aiming at preparing transparent inorganic/organic coating composites. Two types of coating systems were investigated: two-component system (based on functionalized copolymer-HMMM) a three-component system (based on functionalized copolymer-HMMM-TEOS). Their properties were investigated and compared. Coating films obtained from these systems exhibited good optical clarity, which was largely dependent on the content of indicated Materials. For instance, to prevent phase separation in the 3component system, TEOS was “effectively†linked to pendent siloxyl groups on the organic moiety Hence, coating formulations containing a high degree of pendent siloxyl groups exhibited better optical transparency. These coating systems improved abrasion/scratch resistance properties of coated/cured PC sheets Further investigation for the system properties revealed that two crosslinked networks were responsible for the coating film hardness : an organic network resulting from transetherification between copolymer hydroxyl group and HMMM methylol group, and an inorganic network resulting from a sol-gel reaction The inorganic network was the main contributer to the improved surface performance of coated PC samples.

Downloads

Download data is not yet available.

References

Tirpak, R. E., Markusch, P. H. 1986. J. Coat. Technol. 58(738) : 49.

Tateoka, Y., Ryuzo, Y., Miura, U. 1987. Pastic parts with surface-hardening coating containing ultraviolet absorber. U.S. Patent 4,708,908.

Blank, W., 1982. J. Coat. Technol. 54(687) : 26

Koral, J., Peteropoulous, J. 1996. J. Paint. Technol. 38(501) : 600.

Ntsihlele, E., Pizzi, A. 1995. J. Appl. Polym. Sci. 55 : 153.

Bauer D.R., Dickie, R.A. 1980. J. Polym. Sci. 18 : 1997.

Collette, J.W., Corrcoran, P., Tannenbaun, H.P., Zimmt, W.S. 1983. J. Appl. Polym. Sci. 28 : 253.

Lazzara, M.G. 1984, J. Coat. Technol. 56 (710) : 19.

Wei, Y., Yang, D., Tang, L., Hutchins, M.K. 1993. J. Mater. Res. 8 : 1143.

Suriyet, F., Lam, T.M., Pascault, J.P., Pham, Q.T. 1992. Macromolecules. 25 : 4309.

Huang, H.H., Wilkes, G.L. 1987. Polym. Bull. 18 : 455.

Wojcik, A.B., Klein, L.C. 1995. Transparent inorganic/organic copolymers by the solgel process: Thermal behavior of copolymers of tetraethyl orthosilicate (TEOS), vinyl triethoxysilane (VTES) and (meth) acrylate monomers. J. Sol-Gel Sci. Tech. 5 : 77 – 82.

Uhlmann, D.R. 1998. Sol-gel science and technology current state and future prospects. J. Sol-Gel Sci. Tech. 13 : 153 – 162.

Park, N.H., Suh, K.D. 1999. Organic-inorganic microhybrid materials via a novel emulsion mixing method. J. Appl. Polym. Sci. 71(10) : 1597 – 1605.

Wen, J., Vasudevan, V.J., Wilkes, G.L. 1995. abrasion resistant inorganic organic coating materials prepared by the sol-gel method. J. Sol-Gel Sci. Tech. 5 (2) : 115 – 126.

Chen, J. I., Charoensak, R., Puengpipat, V., Marturunkakul, S. 1999. Organic/inorganic composite materials for coating applications. J. Appl. Polym. Sci. 74(6) : 1341 – 1346.

Mukhopadhyay, S.K., Basu, D.Y. Banerjee, A. 1997. DSC, and TCA studies on rosslinking and thermal behavior of vinyl acetate- 2-ethylhexyl acrylate copolymer and hexamethoxymethylmelamine blends. J. Appl. Polym. Sci. 65(11) : 2075 – 2080.

Downloads

Published

2017-04-16

How to Cite

[1]
K. Srikulkit, N. Rojtinnakorn, and R. Charoensak, “Transparent coating materials based on inorganic/organic composites”, J Met Mater Miner, vol. 16, no. 2, Apr. 2017.

Issue

Section

Original Research Articles

Most read articles by the same author(s)

<< < 1 2