PVD coatings applied on the tool steels

Authors

  • Mária Hagarová Faculty of Metallurgy, Technical University of Košice
  • Dagmar Jakubéczyová Institute of Materials Science, Slovak Academy of Sciences, Košice
  • Marek Vojtko Institute of Materials Science, Slovak Academy of Sciences, Košice

Abstract

The paper deals with the properties of thin coatings deposited on the tool steels. The TiAlN coat was applied by PVD technology on the Vanadis steel produced by powder metallurgy. Development of a new technology of coat deposition is connected with adequate evaluation of coated parts. The quality of a thin coating – substrate system was determined by measuring properties.

Downloads

Download data is not yet available.

References

Jakubeczyová, D. and Fáberová, M. 2003. Surface Treatment of P/M Tool Steel. In : Metal 2003, Czech Republic. : 1-6.

Jakubeczyová, D., Jurči, P. and Fáberová, M. 2004. The Application of Surface Modification on the PM High Speed Steel. In : PM 2004, World Congress & amp ; Exhibition, Vienna : 791-796.

Hagarová, M. 2003. The Study of Selected Propperties of TiN Coating. Doctoral, Faculty of Metallurgy, Technical University of Košice, Slovakia.

Bačová, V. and Draganovská, D. 2005. The European Standards Application at the Analysis of the Quality of the Blasting Surface under Coatings. In : Corrosion of Underground Structures. Košice, Slovakia, : 162 – 167.

Ábel., M., Brezinová, J. and Draganovská, D. 2003. The Properties of the Blasting Surfaces. Transfer Iinovácií. 6 : 84 – 87.

Šošovičková, J. 2005. Modification of Properties of Metallic Materials Surfaces by PVD Methods. Doctoral, Brno.

Ballo, V. 1998. Possivilites Life-Time Improvement of Cutting Tools by Hard Coatings for Machining of Non-Metallic Materials. Doctoral, Faculty of Metallurgy, Technical University of Košice, Slovakia

Downloads

Published

2017-04-23

How to Cite

[1]
M. Hagarová, D. . Jakubéczyová, and M. Vojtko, “PVD coatings applied on the tool steels”, J Met Mater Miner, vol. 17, no. 1, Apr. 2017.

Issue

Vol. 17 No. 1 (2007)

Section

Original Research Articles

License

Copyright (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.