Vol. 30 No. 1 (2020)

Published: 2020-03-26

Review Articles

  • Selection of blowing agent for metal foam production: A review

    A Bisht, B Gangil, V K Patel
    DOI: https://doi.org/10.55713/jmmm.v30i1.597

Original Research Articles

  • An approach to search the potentiality of node in bamboo strip reinforced composites

    MI Iqbal, RA Mizan, AN Khan
    DOI: https://doi.org/10.55713/jmmm.v30i1.573

  • Preparation and characterization of lake pigments from sappan wood using Thai local clays

    J Sirirak, N Worawannotai, C Suwanchawalit, S Chayabutra
    DOI: https://doi.org/10.55713/jmmm.v30i1.560

  • On the corrosion behaviour of as-cast and heat-treated Mg-RE alloys in 0.9% NaCl solution

    A Hanna, L Rabahi, MA Soualili, A Dakhouche, D Bradai, H Azzeddine
    DOI: https://doi.org/10.55713/jmmm.v30i1.600

  • Development of Sr/Cao catalyst derived from cuttlebone (Sepia officinalis) for biodiesel production

    N Tomano, A Prokaew, S Boonyuen, S Ummartyotin
    DOI: https://doi.org/10.55713/jmmm.v30i1.553

  • Poly(ester urethane)-crosslinked carboxymethylchitosan as a highly water swollen hydrogel

    N Deepuppha, A Kadnaim, B Rutnakornpituk, M Rutnakornpitak
    DOI: https://doi.org/10.55713/jmmm.v30i1.583

  • Numerical modeling of longwall top coal caving method at thar coalfield

    NM Shahani, Z Wan, X Zheng, L Guichen, C Liu, F I Siddiqui, G Bin
    DOI: https://doi.org/10.55713/jmmm.v30i1.593

  • The luminescence, optical, and structural properties of SrMoO4:Ce3+ phosphor for photonics material applications

    E Kaewnuam, N Wantana, S Saikaew, J Kaewkhao
    DOI: https://doi.org/10.55713/jmmm.v30i1.590

  • Defects of the steel billet in continuous casting

    A-H Bui, V-H Nguyen
    DOI: https://doi.org/10.55713/jmmm.v30i1.574

  • Sm3+ ions doped zinc barium tellurite oxyfluoride glasses for laser materials

    Y Yamsuk, P Yasaka, J Kaewkhao, N Sangwaranatee
    DOI: https://doi.org/10.55713/jmmm.v30i1.594

  • The water permeability properties of re-vibrated lightweight concrete

    M M Kassim
    DOI: https://doi.org/10.55713/jmmm.v30i1.575

  • Physical property and compressive strength of fired clay bricks incorporated with paper waste

    A Srisuwan, N Phonphuak
    DOI: https://doi.org/10.55713/jmmm.v30i1.598

  • Structural studies of natural zeolites and optimizations for water hardness softening media

    T T Gebretsadik, T K Gebremedhin
    DOI: https://doi.org/10.55713/jmmm.v30i1.578

  • Investigation of crosslink structure of natural rubber during vulcanization using X-ray absorption near edge spectroscopy

    K Boonkerd, W Limphirat
    DOI: https://doi.org/10.55713/jmmm.v30i1.601

  • Influence of poly(butylene terephthalate) and wollastonite on properties of recycled poly(ethylene terephthalate) preforms

    P Chaiwutthinan, T Riyaphan, A Simpraditpan, A Larpkasemsuk