Synthesis and visible light photocatalytic activity of silver zinc phosphates
DOI:
https://doi.org/10.55713/jmmm.v34i3.2055Keywords:
Silver phosphate, Visible light photocatalytic activity, Antimicrobial activityAbstract
Currently, photocatalytic materials in common use mainly use ultraviolet light, but the amount of ultraviolet light contained in sunlight is limited and their energy efficiency is known to be low. Therefore, there is a need for a compound that shows photocatalytic activity in visible light, and silver phosphate matches this requirement, but it is relatively expensive. In this study, photocatalytic materials that could use visible light and were relatively inexpensive were attempted to be prepared. Specifically, samples were prepared by changing the silver/zinc molar ratio (Ag/Zn = 100/0, 90/10, 80/20, 70/30, 60/40), and each sample was evaluated and examined from chemical composition, particle size, and functionality (UV-Vis. reflectance spectra, photocatalytic activity evaluation using methylene blue degradation reaction, and antibacterial property evaluation). It was found that silver phosphate was formed even in the sample with the lowest silver ratio, Ag/Zn = 60/40, showing high visible light responsive photocatalytic activity and antibacterial activity against E. coli. Ag/Zn = 60/40, showing high visible light responsive photocatalytic activity and antibacterial activity against E. coli.Downloads
References
G. Job, and F. Herrmann, “Chemical potential—a quantity in search of recognition. European Journal of Physics, vol. 27, no. 2, p. 353, 2006. DOI: https://doi.org/10.1088/0143-0807/27/2/018
H. Ahmad, S. K. Kamarudin, L. J. Minggu, and M. Kassim, “Hydrogen from photo-catalytic water splitting process: A review,” Renewable and Sustainable Energy Reviews, vol. 43, pp. 599-610, 2015. DOI: https://doi.org/10.1016/j.rser.2014.10.101
S. Zhu, and D. Wang, “Photocatalysis: Basic principles, diverse forms of implementations and emerging scientific opportunities,” Advanced Energy Materials, vol. 7, p. 1700841, 2017. DOI: https://doi.org/10.1002/aenm.201700841
J. Z. Hassan, A. Raza, U. Qumar, and G. Li, “Recent advances in engineering strategies of Bi-based photocatalysts for environmental remediation,” Sustainable Materials and Technologies, vol. 33, p. e00478, 2022. DOI: https://doi.org/10.1016/j.susmat.2022.e00478
A. Nairan, Z. Feng, R. Zheng, U. Khan, and J. Ga, “Engineering metallic alloy electrode for robust and active water electro-catalysis with large current density exceeding 2000 mA·cm-2,” vol. 36, no. 29, p. 2401448, 2024. DOI: https://doi.org/10.1002/adma.202401448
S. A. Ruffolo, M. F. La Russa, M. Malagodi, C. Oliviero, A. M. Palermo, and G. M. Crici, “ZnO and ZnTiO3 nanopowders for antimicrobial stone coating,” Applied Physics A., vol. 100, no. 3, pp. 829-834, 2010. DOI: https://doi.org/10.1007/s00339-010-5658-4
W. Promsuwan, P. Sujaridworakun, and W. Reainthippayasakul, “Synthesis of zinc oxide photocatalysts from zinc-dust waste for organic dye degradation,” Journal of Metals, Materials and Minerals, vol. 33, no. 2, pp. 58-64, 2023. DOI: https://doi.org/10.55713/jmmm.v33i2.1608
S. Li, K. Dong, M. Cai, X. Li, and X. Chen, “A plasmonic S-scheme Au/MIL 101(Fe)/BiOBr photocatalyst for efficient synchronous decontamination of Cr(VI) and norfloxacin antibiotic,” eScience, vol. 4, no. 2, p. 100208, 2024. DOI: https://doi.org/10.1016/j.esci.2023.100208
C. Wang, K. Rong, Y. Liu, F. Yang, and S. Li, “Carbon quantum dots-modified tetra (4-carboxyphenyl) porphyrin/ BiOBr S-scheme heterojunction for efficient photocatalytic antibiotic degradation,” Science China Materials, vol. 67, no. 2, pp. 562-572, 2024. DOI: https://doi.org/10.1007/s40843-023-2764-8
Q. Li, Y. W. Li, P. Wu, R. Xie, and J. K.Shang, “Palladium oxide nanoparticles on nitrogen‐doped titanium oxide: accelerated photocatalytic disinfection and post‐illumination catalytic “memory”,” Advanced Materials, vol. 20, no. 19, pp. 3717-3723, 2008. DOI: https://doi.org/10.1002/adma.200800685
S. Rajagopal, R. D. Roberts, and S. K. Lim, “Visible light communication: Modulation schemes and dimming support,” IEEE Communications Magazine, vol. 50, no. 3, pp. 72-82, 2012. DOI: https://doi.org/10.1109/MCOM.2012.6163585
S. Dong, J. Feng, M. Fan, Y. Pi, L. Hu, M. Liu, J. Sun, and C. Du, “Recent developments in heterogeneous photocatalytic water treatment using visible light-responsive photocatalysts: A review,” RSC Advances, vol. 5, no. 19, p. 14610, 2015. DOI: https://doi.org/10.1039/C4RA13734E
H. Tong, S. Ouyang, Y. Bi, N. Umezawa, M. Oshikiri, and J. Ye, “Nano‐photocatalytic materials: Possibilities and challenges,” Advanced Materials, vol. 24, no. 2, pp. 229-251, 2012. DOI: https://doi.org/10.1002/adma.201102752
M. V. Dozzi, and E. Selli, “Doping TiO2 with p-block elements: Effects on photocatalytic activity,” Journal of Photochemistry
and Photobiology C: Photochemistry Reviews, vol. 14, pp. 13-28, 2013. DOI: https://doi.org/10.1016/j.jphotochemrev.2012.09.002
C. Tangwongputti, P. Reubroycharoen, and P. Sujaridworakun, “Facile synthesis of heterostructured g-C3N4/Ag-TiO2 photo-catalysts with enhanced visible-light photocatalytic performance,” Journal of Metals, Materials and Minerals, vol. 32, no. 1, pp. 48-54, 2022. DOI: https://doi.org/10.55713/jmmm.v32i1.1246
S. Li, C. You, K. Rong, C. Zhuang, X. Chen, and B. Zhang, “Chemically bonded Mn0.5Cd0.5S/BiOBr S-scheme photocatalyst with rich oxygen vacancies for improved photocatalytic decontamination performance,” Advanced Powder Materials, vol. 3, p. 100183, 2024. DOI: https://doi.org/10.1016/j.apmate.2024.100183
E. S. Kim, H. Kang, G. Magesh, J. Y. Kin, J-W Jang, and J. S. Lee, “Improved photoelectrochemical activity of CaFe2O4/BiVO4 heterojunction photoanode by reduced surface recombination in solar water oxidation,” ACS Applied Materials and Interfaces, vol. 6, p. 17762, 2014. DOI: https://doi.org/10.1021/am504283t
Q. Zheng, D. P. Durkin, J. E. Elenewski, Y. Sun, N. A. Banek, L Hua, H. Chen, M. J. Wagner, W. Zhang, and D. Shuai, “Visible-light-responsive graphitic carbon nitride: rational design and photocatalytic applications for water treatment,” Environmental Science & Technology, vol. 50, no. 23, p. 12938, 2016. DOI: https://doi.org/10.1021/acs.est.6b02579
M. G. Lee, J. S. Park, and H. W. Jang, “Solution-processed metal oxide thin film nanostructures for water splitting photo-electrodes: A review,” Journal of the Korean Ceramic Society, vol. 55, no. 3, pp. 185-202, 2018. DOI: https://doi.org/10.4191/kcers.2018.55.3.08
A. Amirulsyafiee, M. M. Khan, and M. Y. Khan, “Visible light active La-doped Ag3PO4 for photocatalytic degradation of dyes and reduction of Cr (VI),” Solid State Sciences, vol. 131, p. 106950, 2022. DOI: https://doi.org/10.1016/j.solidstatesciences.2022.106950
Y. J. Cheng, D. N. Zeiger, J. A. Howarter, X. Zhang, N.J. Lin, J. M. Antonucci, and S. Lin-Gibson, “In situ formation of silver nanoparticles in photocrosslinking polymers,” Journal of Biomedical Materials Research Part B Applied Biomaterials, vol. 97, no. 1, pp. 124-131, 2011. DOI: https://doi.org/10.1002/jbm.b.31793
S. Guo, Y. Jiang, F. Wu, P. Yu, H. Liu, Y. Li, and L Mao, “Graphdiyne-promoted highly efficient photocatalytic activity of graphdiyne/silver phosphate pickering emulsion under visible-light irradiation. ACS Applied Materials and Interfaces, vol. 11, no. 3, pp. 2684-2691, 2019. DOI: https://doi.org/10.1021/acsami.8b04463
D. J. Martin, G. Liu, S. J. A. Moniz, Y. Bi, A. Beale, J. Ye, and H. Tang, “Efficient visible driven photocatalyst, silver phosphate: Performance, understanding and perspective,” Chemical Society Reviews, vol. 44, no. 21, pp. 7808-7828, 2015. DOI: https://doi.org/10.1039/C5CS00380F
F. Dong, H. Liu, W. K. Ho, M. Fu, and Z. Wu, “(NH4)2CO3 mediated hydrothermal synthesis of N-doped (BiO)2CO3 hollow nanoplates microspheres as high-performance and durable visible light photocatalyst for air cleaning,” Chemical Engineering Journal, vol. 214, pp. 198-207, 2013. DOI: https://doi.org/10.1016/j.cej.2012.10.039
Y. Mao, T. J. Park, F. Zhang, H. Zhou, and S. S. Wong, “Environmentally friendly methodologies of nanostructure synthesis,” Small., vol. 3, no. 7, pp. 1122-1139, 2007. DOI: https://doi.org/10.1002/smll.200700048
I. S. Neira, Y. V. Kolen’ko, O. I. Lebedev, G. V. Tendeloo, H. S. Gupta, F. Guitian, and M. Yoshimura, “An effective morphology control of hydroxyapatite crystals via hydrothermal synthesis,” Crystal Growth and Design, vol. 9, no. 1, pp. 466-474, 2009. DOI: https://doi.org/10.1021/cg800738a
A. Amirulsyafiee, M. M. Khan, and M. H. Harunsani, “Ag3PO4 and Ag3PO4–based visible light active photocatalysts: Recent progress, synthesis, and photocatalytic applications,” Catalysis Communications, vol. 172, p. 106556, 2022. DOI: https://doi.org/10.1016/j.catcom.2022.106556
H. N. Ng, C. Calvo, and R. Faggiani, “A new investigation of the structure of silver orthophosphate,” Acta Crystallographica, vol. B34, pp. 898-899, 1978. DOI: https://doi.org/10.1107/S0567740878014570
S. H. Sohrabnezhad, “Study of catalytic reduction and photo-degradation of methylene blue by heterogeneous catalyst,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 81, no. 1, pp. 228-235, 2011. DOI: https://doi.org/10.1016/j.saa.2011.05.109
Downloads
Published
How to Cite
License
Copyright (c) 2024 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.