Vol. 34 No. 3 (2024): September

Published: 2024-09-09

Review Articles

  • A review on the development of metals-doped Vanadium oxides for zinc-ion battery

    Kittima LOLUPIMA, Jin Cao, Dongdong ZHANG, Chenwu YANG, Xinyu ZHANG, Jiaqian QIN
    2084
    DOI: https://doi.org/10.55713/jmmm.v34i3.2084

Original Research Articles

  • Comparative studies of radio transparency and dielectric characteristics of polymer composites

    Azira YERMAKHANOVA, Aidar KENZHEGULOV, Berdiyar BAISERIKOV, Мohammed MEIIRBEKOV, Nurlan BOGUSPAYEV
    1836
    DOI: https://doi.org/10.55713/jmmm.v34i3.1836

  • Effect of hatch spacing in selective laser melting process of Ti-6Al-4V alloy on finished surface roughness: A computational study

    Reettiporn THONGPRON, Patiparn NINPETCH, Prasert CHALERMKARNNON, Pruet KOWITWARANGKUL
    1861
    DOI: https://doi.org/10.55713/jmmm.v34i3.1861

  • The effects of the crystallinity index of cellulose on the flexural properties of hybrid-cellulose epoxy composites

    Nathawat POOPAKDEE, Warut THAMMAWICHAI
    1902
    DOI: https://doi.org/10.55713/jmmm.v34i3.1902

  • Maintenance of the deteriorated infrastructure in Thailand

    Pakawat SANCHAROEN, Sothyrak RATH, Dong Viet Phuong TRAN, Pitichon KLOMJIT, Somnuk TANGTERMSIRIKUL
    1916
    DOI: https://doi.org/10.55713/jmmm.v34i3.1916

  • Use of commercial synthetic filament waste to reinforce biobased poly(butylene succinate) with the aid of compatibilizers

    Nattakarn HONGSRIPHAN, Alongkorn POPANNA
    1947
    DOI: https://doi.org/10.55713/jmmm.v34i3.1947

  • Structural, morphological, magnetic, and dielectric properties of copper-substituted Cu\(_{X}\)Zn\(_{(1-X)}\)Fe\(_{2}\)O\(_{4}\) nanoparticles: Green synthesis

    Gavisiddaiah HARISHA, Ramakrishnaiah THEJAS, B. Venkatagiriyappa PADMINI, Chinnappa Reddy DEVARAJA, Malalkere Veerappa MURUGENDRAPPA, Koppa Mahadevappa RAJASHEKARA
    1955
    DOI: https://doi.org/10.55713/jmmm.v34i3.1955

  • Vibration absorption of as-built and post-heat-treated Ti-6Al-4V alloy fabricated by laser powder bed fusion additive manufacturing

    Masaaki NAKAI, Kohei NAGAYA, Kosuke UEKI, Hideki KYOGOKU
    1963
    DOI: https://doi.org/10.55713/jmmm.v34i3.1963

  • ZnO nanostructures synthesized by one-step sol-gel process using different zinc precursors

    Maneerat SONGPANIT, Kanokthip BOONYARATTANAKALIN, Wisanu PECHARAPA, Wanichaya MEKPRASART
    1968
    DOI: https://doi.org/10.55713/jmmm.v34i3.1968

  • Properties of Acrylonitrile-Butadiene-Styrene nanocomposites adding ammonia plasma treated carbon nanotubes/graphene nanoplatelets for electronic discharge application

    Sorawit DUANGSRIPAT, Pajaera PATANATHABUTR, Nattakarn HONGSRIPHAN
    2010
    DOI: https://doi.org/10.55713/jmmm.v34i3.2010

  • Development of forming limit diagrams for motorcycle fuel tank made from AA5754-O under deep drawing

    Phiraphong LARPPRASOETKUN, Jidapa LEELASEAT, Aeksuwat NAKWATTANASET, Surasak SURANUNTCHAI
    2013
    DOI: https://doi.org/10.55713/jmmm.v34i3.2013

  • Investigating the oxidation behavior of Mg-Zn alloy: Effects of heating rates, gas flow, protective atmosphere, and alloy composition

    Tuğçe Nur SARAÇOĞLU, Safa POLAT, Erkan KOÇ, Muwafaq MASHRAH, Amir NAJAH SAUD, Marta MICHALSKA-DOMAŃSKA
    2033
    DOI: https://doi.org/10.55713/jmmm.v34i3.2033

  • High-performance NO2 gas sensor based on reduced graphene oxide/ZrO2 hybrids

    Ali Jabbar FRAIH, N. Naeema, Fatima Fadhil ABBAS
    2038
    DOI: https://doi.org/10.55713/jmmm.v34i3.2038

  • Adhesive wear characteristics of mono and hybrid CF/Ep composite with nano-HAP filler

    Divya GURKAR SOMASHEKAR, Naveena BETTAHALLI ESWAREGOWDA, Suresha BHEEMAPPA
    2040
    DOI: https://doi.org/10.55713/jmmm.v34i3.2040

  • Effects of oleylamine concentration on the synthesis of formamidinium lead halide perovskite nanocrystals and physical-optical properties

    Kunlasatree KUNSAENG, Yingyot INFAHSAENG
    2041
    DOI: https://doi.org/10.55713/jmmm.v34i3.2041

  • Synthesis and visible light photocatalytic activity of silver zinc phosphates

    Rina KANEMOTO, Hiroaki ONODA
    2055
    DOI: https://doi.org/10.55713/jmmm.v34i3.2055

  • Fabrication and characterization of zinc anode on nickel conductive cloth for high-performance zinc ion battery applications

    Tanapoom MAWINTORN, Kittima LOLUPIMAN, Napat KIATWISARNKIJ, Pattaraporn WOOTTAPANIT, Manickavasakam KARNAN, Suwimon SANEEWONG NA AYUTTAY, Xinyu ZHANG, Panyawat WANGYAO, Jiaqian QIN
    2083
    DOI: https://doi.org/10.55713/jmmm.v34i3.2083

  • Phase separation promotes FCC-phase mechanical twinning in AlCoCrFeMo0.05Ni2 high entropy alloy

    Zifeng ZHANG, Liang CHU, Jiqing ZHAO, Bing XU, Qilu YE
    2107
    DOI: https://doi.org/10.55713/jmmm.v34i3.2107