Separation of lycopene/solvent mixture by chitosan membranes

Authors

  • Pram Yodjun Faculty of Science, Chulalongkorn University and Center of Excellence for Petroleum, Petrochemical, and Advanced Materials, Chulalongkorn University
  • Khantong Soontarapa Faculty of Science, Chulalongkorn University and Center of Excellence for Petroleum, Petrochemical, and Advanced Materials, Chulalongkorn University
  • Chutima Eamchotchawalit Materials Innovation Department, Thailand Institute of Scientific and Technological Research

Keywords:

Chitosan membrane, Lycopene/solvent mixture, Pervaporation

Abstract

Acetone in view of lower toxicity could be used as extracting solvent of lycopene in tomato paste instead of hexane. The studied chitosan membranes were uncrosslinked and crosslinked types. It was found that the membrane morphology could be changed from porous to dense structure by increasing evaporation temperature or time or by crosslinking. They showed hydrophilicity but not preferred to both acetone and lycopene. The lycopene/acetone mixture could be separated by using water swollen chitosan membrane in pervaporation process. It was found that all studied membranes; i.e., both uncrosslinked and ionically crosslinked membranes prepared at 40 to 60°C for 2 to 6 hours, could separate acetone from lycopene solution as permeate with rejection of 100% or separation factor of infinity. The uncrosslinked membrane prepared at 40°C for 2 hours provided the highest acetone flux of 0.131±0.004 L m-2 h-1 by operating at −1 bar and 15 ppm feed concentration.

Downloads

References

Olives Barba, A.l., Cámara Hurtado, M., Sánchez Mata, M.C., Fernández Ruiz, V.& López Sáenz De, M. (2006). Application of a UV–vis detection-HPLC method for a rapid determination of lycopene and bcarotene in vegetables. Food Chem. 95(2): 328-336.

Naviglio, D., Pizzolongo, F., Ferrara, L., Naviglio, B., Aragòn, A. & Santini, A. (2008). Extraction of pure lycopene from industrial tomato waste in water using the extractor Naviglio. Afr. J. Food Sci. 2(4): 37-44.

Montesano, D., Fallarino, F., Cossignani, L., Bosi, A., Simonetti, M.S., Puccetti, P. & Damiani, P. (2008). Innovative extraction procedure for obtaining high pure lycopene from tomato. Eur. Food Res. Technol. 226(3): 327-335.

Nishi, N., Maekita, Y., Nishimura, S.I., Hasegawa, O. & Tokura, S. (1987). Highly phosphorylated derivatives of chitin, partially deacetylated chitin and chitosan as new functional polymers: metal binding property of the insolubilized materials. Macromal. Int. J. Biol. Macromal. 9(2): 109-114.

Shi, J. & Le Maguer, M. (2000). Lycopene in tomatoes: chemical and physical properties affected by food processing. CRC Cr. Rev. Food Sci. 40(1): 1-42.

Taungbodhitham, A.K., Jones, G.P., Wahlqvist, M.L. & Briggs, D.R. (1998). Evaluation of extraction method for the analysis of carotenoids in fruits and vegetables. Food Chem. 63(4): 577-584.

Downloads

Published

2011-06-30

How to Cite

[1]
P. Yodjun, K. Soontarapa, and C. Eamchotchawalit, “Separation of lycopene/solvent mixture by chitosan membranes”, J Met Mater Miner, vol. 21, no. 1, Jun. 2011.

Issue

Section

Original Research Articles