Interface characterization in tungsten fiber/Zr-based bulk metallic glass matrix composite

Mohammad Ammar MOFID; Mostafa JAFARZADEGAN

doi:10.55713/jmmm.v31i1.1002

ผู้แต่ง

Mohammad Ammar MOFID Department of Petroleum, Mining and Material Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran https://orcid.org/0000-0003-1687-7440
Mostafa JAFARZADEGAN Department of Petroleum, Mining and Material Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran

DOI:

https://doi.org/10.55713/jmmm.v31i1.1002

คำสำคัญ:

Zr-based bulk metallic, glass, Tungsten fiber, Infiltration time, Compression strength

บทคัดย่อ

In this research, Zr55Cu30Al10Ni5 bulk metallic glass (BMG) alloy is used as the base material to form tungsten fiber reinforced BMG composites. The composites are synthetized using melt infiltration casting method and their microstructure and compressive properties are investigated. Two different infiltration times of 10 min and 15 min are used to produce the composites. The microstructural evaluation of the interface between tungsten fiber and BMG matrix reveals that a narrow reaction band emerges between the tungsten wires and BMG alloy. Some portions of this layer are broken into the fine Zr/W-rich particles and eventually are dispersed in the BMG matrix, when the infiltration time is 15 min. The results also showed that increasing the infiltration time from 10 min to 15 min improves the compression strength of the composite from 1333 MPa to 1396 MPa and also increases the compression strain of the composite from 0.11 to 0.13. This is attributed to the lack of porosities and better metallurgical bonding between tungsten fibers and BMG matrix.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

R.D. Conner, A.J. Rosakis, W.L. Johnson, and D.M. Owen, "Fractre toughness determination for a berylium-bearing bulk metallic glass," Scr Mater, vol. 37, pp.1373-1378, 1997. DOI: https://doi.org/10.1016/S1359-6462(97)00250-9

C.J. Gilbert, R.O. Ritchie, and W.L. Johnson, "Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass," Appl Phys Lett, vol. 71, pp. 476-478, 1997. DOI: https://doi.org/10.1063/1.119610

J. Jayaraj, D.J. Sordelet, D.H. Kim, Y.C. Kim, and E. Fleury, "Corrosion behaviour of Ni–Zr–Ti–Si–Sn amorphous plasma spray coating‏," Corrosion Science, vol. 48, pp. 950-964, 2006. DOI: https://doi.org/10.1016/j.corsci.2005.04.006

M. Chen, "Mechanical behavior of metallic glasses: microscopic understanding of strength and ductility," Annual Review of Materials Research, vol. 38, pp. 445-469, 2008. DOI: https://doi.org/10.1146/annurev.matsci.38.060407.130226

Z.P. Lu, C.T. Liu, J.R. Thompson, and W.D. Porter, "Structural amorphous steels," Phys. Rev. Lett, vol. 92(24), pp. 245-503, 2004. DOI: https://doi.org/10.1103/PhysRevLett.92.245503

A. Inoue, "Stabilization of metallic supercooled liquid and bulk amorphous alloys," Acta Materialia, vol. 48(1), pp. 279-306, 2000. DOI: https://doi.org/10.1016/S1359-6454(99)00300-6

H. Choi-Yim, R. Busch, U. Koster, and W.L. Johnson, "Synthesis and characterization of particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites," Acta Materialia, vol. 47, pp. 2455-2462, 1999. DOI: https://doi.org/10.1016/S1359-6454(99)00103-2

R.D. Conner, R.B. Dandliker, V. Scruggs, and W.L. Johnson, "Dynamic deformation behavior of tungsten-fiber/metallic-glass matrix composites" Inter J Impact Eng, vol. 24 (5), pp. 435-444, 2000. DOI: https://doi.org/10.1016/S0734-743X(99)00176-1

B. Clausen, Y. Lee S, E. Üstündag, C.C. Aydiner, R.D. Conner, and M.A.M .Bourke, "Compressive yielding of tungsten fiber reinforced bulk metallic glass composites," Scripta Materialia, vol. 49(2), pp. 123-128, 2003. DOI: https://doi.org/10.1016/S1359-6462(03)00237-9

K.Q. Qiu, A.M. Wang, H.F. Zhang, B.Z. Ding, and Z.Q. Hu, "Mechanical properties of tungsten fiber reinforced ZrAlNiCuSi metallic glass matrix composite," Intermetallics, vol. 10(11-12), pp. 1283-1288, 2002. DOI: https://doi.org/10.1016/S0966-9795(02)00136-X

J. Qiao, H. Jia, and P.K. Liaw, "Metallic glass matrix composites" Materials Science and Engineering R, vol. 100, pp. 1-69. 2016. DOI: https://doi.org/10.1016/j.mser.2015.12.001

Y.L. Huang, A. Bracchi, T. Niermann, M. Seibt, D. Danilov, B. Nestler, and S. Schneider, "Dendritic microstructure in the metallic glass matrix composite Zr56Ti14Nb5Cu7Ni6Be12," Scripta Materialia, vol. 53(1), pp. 93-97, 2005. DOI: https://doi.org/10.1016/j.scriptamat.2005.03.005

W. Löser, J. Das, A. Güth, H.J. Klauß, C. Mickel, U. Kühn, J. Echert, S.K. Roy, and L. Schultz, "Effect of casting conditions on dendrite-amorphous/nanocrystalline Zr–Nb–Cu–Ni–Al in situ composites," Intermetallics, vol. 12(10-11), pp. 1153-1158, 2004. DOI: https://doi.org/10.1016/j.intermet.2004.04.017

Z. Bian, G. He, and G.L. Chen, "Investigation of shear bands under compressive testing for Zr-base bulk metallic glasses containing nanocrystals," Scripta Materialia, vol. 46(6), pp. 407-412, 2002. DOI: https://doi.org/10.1016/S1359-6462(01)01233-7

G. He, W. Loser, and J. Eckert, "In situ formed Ti–Cu–Ni–Sn–Ta nanostructure-dendrite composite with large plasticity'" Acta Materialia, vol. 51(17), pp. 5223-5234, 2003. DOI: https://doi.org/10.1016/S1359-6454(03)00386-0

H. Kato, T. Hirano, A. Matsuo, Y. Kawamura, and A. Inoue. "High strength and good ductility of Zr55Al10Ni5Cu30 bulk glass containing ZrC particles‏," Scripta Materialia, vol. 43, pp. 503-507, 2000. DOI: https://doi.org/10.1016/S1359-6462(00)00452-8

B.Y. Zhang, X.H. Chen, S.S Wang, D.Y Lin, and X.D Hui, "High strength tungsten wire reinforced Zr-based bulk metallic glass matrix composites prepared by continuous infiltration process," Materials Letters, vol. 93, pp. 210-214, 2013. DOI: https://doi.org/10.1016/j.matlet.2012.11.086

H. Choi-Yim, R.D. Conner, F. Szuecs, and W.L. Johnson, Quasistatic and dynamic deformation of tungsten reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass matrix composites, Scr. Mater, vol. 45, pp. 1039-1045, 2001. DOI: https://doi.org/10.1016/S1359-6462(01)01134-4

B.P. Wang, B.Q. Yu, Q.B. Fana, J.Y. Liang, L. Wang, Y.F. Xue, H.F. Zhange, and H.M. Fue, "Anisotropic dynamic mechanical response of tungsten fiber/Zr-based bulk metallic glass composites," Materials and Design, vol. 93, pp. 485-493, 2016. DOI: https://doi.org/10.1016/j.matdes.2016.01.005

M.L. Wang, G.L. Chen, X. Hui, Y. Zhang, and Z.Y. Bai, "Optimized interface and mechanical properties of W fiber/ Zr-based bulk metallic glass composites by minor Nb addition," Intermetallics, vol. 15, pp. 1309-1315, 2007.

C. Du, D. Shu, Z. Du, G. Gao, M. Wang, Z. Zhu, and L. Xu, "Effect of L/D on penetration performance of tungsten fibre/ Zr-based bulk metallic glass matrix composite rod," International Journal of Refractory Metals & Hard Materials, vol. 85, pp. 105042, 2019. DOI: https://doi.org/10.1016/j.ijrmhm.2019.105042

Y. Mao, J.W. Coenen, J. Riesch, S. Sistla, J. Almanstötter, B. Jasper, A. Terra, T. Höschen, H. Gietl, C. Linsmeier, and C. Broeckmann, "Influence of the interface strength on the mechanical properties of discontinuous tungsten fiber-reinforced tungsten composites produced by field assisted sintering technology," Compos. Part A Appl. Sci. Manuf, vol. 107, pp. 342-353, 2018. DOI: https://doi.org/10.1016/j.compositesa.2018.01.022

M.L. Wang, G.L. Chen, X. Hui, Y. Zhang, and Z.Y. Bai, "Optimized interface and mechanical properties of W fiber/ Zr-based bulk, metallic glass composites by minor Nb addition," Intermetallics, vol. 15(10), pp. 1309-1315, 2007. DOI: https://doi.org/10.1016/j.intermet.2007.03.013

Z.K. Li, H.M. Fu, P.F. Sha, Z.W. Zhu, A.M. Wang, H. Li, H.W. Zhang, H.F. Zhang, and Z.Q. Hu, "Atomic interaction mechanism for designing the interface of W/Zr-based bulk metallic glass composites," Sci. Rep, vol. 5, pp. 8967, 2015. DOI: https://doi.org/10.1038/srep08967

D. Dragoi, E. Ustundag, B. Clausen, and M.A.M. Bourke, "Investigation of thermal 544 residual stresses in tungsten-fiber/bulk metallic glass matrix composites," Scripta. 545 Mater, vol. 45(2), pp. 245-252, 2001. DOI: https://doi.org/10.1016/S1359-6462(01)01031-4

Z.Q. Hu, A.M. Wang, and H.F. Zhang, "Amorphous Materials," In: Xu R, Xu Y, editors. Modern Inorganic Synthetic Chemistry. second ed. Netherlands: Elsevier; 2017. pp. 641-667. DOI: https://doi.org/10.1016/B978-0-444-63591-4.00022-7

Z. Xiaoqing, L. Shukui, L. Jinxu, W. Yingchun, and W. Xing. "Self-sharpening behavior during ballistic impact of the tungsten heavy alloy rod penetrators processed by hot-hydrostatic extrusion and hot torsion," Materials Science and Engineering A, vol. 527, pp. 4881-4886, 2010. DOI: https://doi.org/10.1016/j.msea.2010.04.050

R. Luo, D. Huang, M. Yang, E. Tang, M. Wang, and L. He, "Penetrating performance and “self-sharpening” behavior of fine-grained tungsten heavy alloy rod penetrators," Materials Science and Engineering: A, vol. 675, pp. 262-270, 2016 DOI: https://doi.org/10.1016/j.msea.2016.08.060

R.B. Dandliker, R.D. Conner, and W.L. Johnson, "Melt infiltration casting of bulk metallic-glass matrix composites," Journal of Materials Research, vol. 13, pp. 2896-2901, 1998. DOI: https://doi.org/10.1557/JMR.1998.0396

W.L. Johnson, "Bulk glass-forming metallic alloys: Science and technology," MRS Bulletin, vol. 24, pp. 42-56, 1999. DOI: https://doi.org/10.1557/S0883769400053252

T. Liu, P. Shen, F. Qiu, T. Zhang, and Q. Jiang, "Microstructures and mechanical properties of ZrC reinforced (Zr-Ti)-Al-Ni-Cu glassy composites by an in situ reaction," Advanced Engineering Materials, vol. 11, pp. 392-398, 2009. DOI: https://doi.org/10.1002/adem.200800359