Luminescent properties of polyaniline capped Mn doped ZnS quantum dots
คำสำคัญ:
Polyaniline, Zinc sulfide nanoparticles, luminescent properties, Ab-initio computationบทคัดย่อ
Synthesis of polyaniline capped and Mn doped quantum dots are performed with co-precipitation tech. while structural, optical and morphological properties have been carried out by using Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD) study, photoluminescent (PL), absorption spectroscopy and High-Resolution Transmission Electron Microscopy (HR-TEM). Particles size is nearly 2 nm calculated using XRD analysis and nearly 2.5 nm as estimated from HR-TEM study. FTIR spectra confirm that ZnS and polyaniline interact through S-H vibrations. The absorption spectra analysis reflects the occurrence of blue shift at the peak of absorption along with the enhanced band gap of polyaniline capped ZnS(Mn) nanocomposites as compare to bulk ZnS, this confirms quantum confinement effect.
Computation using DFT (B3LYP) 6-31G method shows a strong electronic interaction between the Zn and N creating a large dipole moment of 13.3586 Debye on the interacting site. The red shift has been shown in PL spectra with increasing conc. of polyaniline in ZnS(Mn) quantum dots. The optical behavior of polymer capped ZnS(Mn) quantum dots has been maintained by these PL and other properties due to which flexibility of the nanostructure material may get improved and make it highly preferable for application in foldable display devices and laser diode.
Computation using DFT (B3LYP) 6-31G method shows a strong electronic interaction between the Zn and N creating a large dipole moment of 13.3586 Debye on the interacting site. The red shift has been shown in PL spectra with increasing conc. of polyaniline in ZnS(Mn) quantum dots. The optical behavior of polymer capped ZnS(Mn) quantum dots has been maintained by these PL and other properties due to which flexibility of the nanostructure material may get improved and make it highly preferable for application in foldable display devices and laser diode.
Downloads
เอกสารอ้างอิง
S. Singhal, J. Kaur, T. Namgyal and R. Sharma, “Cu-doped ZnO nanoparticles: synthesis, structural and electrical properties,” Physica B: Condensed Matter, vol. 407(8), pp. 1223-1226, 2012.
H. Bahramnia, H. M. Semnani, A. Habibolahzadeh and H. Abdoos, “Epoxy/polyurethane hybrid nanocomposite coatings reinforced with MWCNTs and SiO2 nanoparticles processing, mechanical properties and wear behavior,” Surface and Coatings Technology, vol. 415, pp.127121, 2021.
A. Kumar, M Kumar, V.Bhatt, D.Kim, , S. Mukherjee, J. H.Yun and R. K. Choubey, “ZnS microspheres-based photoconductor for UV light-sensing applications”, Chemical Physics Letters, vol.763, pp.138162, 2021.
V. D. Mote and B. N. Dole, “Structural, optical, and magnetic properties of Mn-doped ZnS nanoparticles,” Journal of Materials Science: Materials in Electronics, vol. 32(1), pp. 420-429, 2021.
B. X. Dong, F. Qiu, Q. Li, S.L. Shu, H.Y. Yang and Q.C. Jiang, “The synthesis, structure, morphology characterizations and evolution mechanisms of nanosized titanium carbides and their further applications,” Nanomaterials, vol.9(8), pp. 1152, 2019.
S. Mallesh and V. Srinivas, “Evolution of structure and magnetic properties in Mn Zn ferrite-silica nanocomposites fabricated by sol-gel method,” Journal of Materials Science: Materials in Electronics, vol. 32(4), pp.4862-4871, 2021.
A. Kumar, M. Kumar, V. Bhatt, S. Mukherjee, S. Kumar, H. Sharma and R. K. Choubey, “Highly responsive and low-cost ultraviolet sensor based on ZnS/p-Si heterojunction grown by chemical bath deposition” Sensors and Actuators A: Physical, vol.331, pp.112988, 2021.
J. Klanwan, N. Akrapattangkul, V. Pavarajarn, T. Seto, Y. Otani and T. Charinpanitkul, “Single-step synthesis of MWCNT/ZnO nanocomposite using co-chemical vapor deposition method,” Materials Letters, vol. 64(1), pp.80-82, 2010.
N. Manivannan, S. K. CK and R. Sathyamoorthy, “Effect of Gd doping on structural, surface and optical properties of ZnS prepared by chemical precipitation method,” Optik, vol.136, pp.259-264, 2017.
M. Hessien, E. Da'na and A. Taha, “Phytoextract assisted hydrothermal synthesis of ZnO–NiO nanocomposites using neem leaves extract,” Ceramics International, vol. 47(1), pp.811-816, 2021.
M. R. Bodke, Y. Purushotham and B.N. Dole, “Crystallographic and optical studies on Cr doped ZnS nanocrystals,” Cerâmica, vol. 60(355), pp.425-428, 2014.
R. Kandulna and R. B. Choudhary, “Robust electron transport properties of PANI/PPY/ZnO polymeric nanocomposites for OLED applications,” Optik, vol. 144, pp.40-48, 2017.
K. R. Bindu and E.I. Anila, “Optimized synthesis temperature and doping concentration of copper in zinc sulfide nanoparticles for green emission,” Materials Science in Semiconductor Processing, vol.121, pp. 105317, 2021.
A. Kumar, M. Kumar, V. Bhatt, D. Kim, S. Mukherjee, J.H. Yun and R.K. Choubey, “ZnS microspheres-based photoconductor for UV light-sensing applications,” Chemical Physics Letters, vol.763, pp.138162, 2021.
I. Hussain, D. Mohapatra, G. Dhakal, C.Lamiel, S. G. Mohamed, M. S. Sayed and J. J. Shim, “Different controlled nanostructures of Mn-doped ZnS for high-performance supercapacitor applications,” Journal of Energy Storage, vol.32, pp.101767, 2020.
V. D. Mote and B. N. Dole, “Structural, optical and magnetic properties of Mn-doped ZnS nanoparticles,” Journal of Materials Science: Materials in Electronics, vol. 32(1), pp. 1-10, 2020.
A. Kumar, S. Mukherjee, S. Sahare and R. K. Choubey, “Influence of deposition time on the properties of ZnS/p-Si heterostructures”, Materials Science in Semiconductor Processing, vol.122, pp.105471, 2021.
A. Kaderavkova, L. Loghina, M. Chylii, S. Slang, P. Placek, B. Frumarova and M. Vlcek, “N, N′, N′-trisubstituted thiourea as a novel sulfur source for the synthesis of Mn-doped ZnS QDs,” Journal of Alloys and Compounds, vol. 831, pp.154814, 2020.
K.P. Tiwary, F. Ali, S.K. Choubey, R.K. Mishra and K. Sharma, “Doping effect of Ni2+ ion on structural, morphological and optical properties of Zinc sulfide nanoparticles synthesized by a microwave-assisted method,” Optik, vol. 227,pp. 166045, 2021.
A. Badawi and M.G. Althobaiti, “Effect of Cu-doping on the structure, FT-IR and optical properties of Titania for environmental-friendly applications,” Ceramics International, vol. 47(8), pp. 11777-11785, 2021.
M. Mostafa, J. El Nady, S. M. Ebrahim and A.M. Elshaer, “Synthesis, structural, and optical properties of Mn2+ doped ZnS quantum dots for biosensor application,” Optical Materials, vol. 112, pp. 110732, 2021.
B. Poornaprakash, U. Chalapathi, M. Kumar, S.P. Vattikuti, B. Rajitha, P.T. Poojitha and S. H. Park, “Tailoring the optical and magnetic properties of ZnS nanoparticles via 3d and 4f elements co-doping,” Materials Science in Semiconductor Processing, vol.121, pp. 105395, 2021.
R. Sarkar, C. S. Tiwary, P. Kumbhakar, S, Basu and A. K. Mitra, “Yellow-orange light emission from Mn2+-doped ZnS nanoparticles,” Physica E: Low-dimensional Systems and Nanostructures, vol.40(10), pp. 3115-3120, 2008.
M. Nirmal, C. B. Murray and M. G. Bawendi, “Fluorescence-line narrowing in CdSe quantum dots: Surface localization of the photogenerated exciton,” Physical Review B, vol. 50(4), pp. 2293, 1994.
M. Kuno, J. K.Lee, B. O. Dabbousi, F. V. Mikulec and M. G. Bawendi, “The band edge luminescence of surface modified CdSe nanocrystallites: Probing the luminescing state,” The Journal of Chemical Physics, vol. 106(23), pp.9869-9882, 1997.
H. Shen, X. Bai, A. Wang, H. Wang, L. Qian, Y. Yang and L. S. Li, “High‐efficient deep‐blue light‐emitting diodes by using high quality ZnxCd1‐xS/ZnS core/shell quantum dots,” Advanced Functional Materials, vol.24(16), pp.2367-2373, 2014.
A. G. MacDiarmid, “Synthetic Metal, A Novel Role for Organic Polymers (Nobel Lecture),” Angew. Chem., Int. Ed. vol. 40, pp. 2581-2590, 2001.
R. Sehrawat and A. Sil, “Effect of solvents on electrochemical performance of polypyrrole coated LiFePO 4/C cathode materials for Li-ion battery,” Journal of Materials Science: Materials in Electronics, vol. 26(7), pp. 5175-5185, 2015.
Y. Li, S. Song, L. B. Zhang, X.X. Lian, L.X. Shan and Q.J. Zhou, “Fabrication of hollow porous ZnO@ ZnS heterostructures via the hydrothermal method and enhanced gas-sensing performance for ethanol,” Journal of Alloys and Compounds, vol.855,pp. 157430, 2021.
N. Arif, S. Gul, M. Sohail, S. Rizwan and M. Iqbal, “Synthesis and characterization of layered Nb2C MXene/ZnS nanocomposites for highly selective electrochemical sensing of dopamine,” Ceramics International, vol. 47(2), pp. 2388-2396, 2021.
H. Ali, “Ternary system from mesoporous CdS–ZnS modified with polyaniline for removal of cationic and anionic dyes,” Research on Chemical Intermediates, vol. 46(1), pp. 571-592, 2020.
S. Saravanan, M. R. Anantharaman, S. Venkatachalam and D. K. Avasthi, “Studies on the optical band gap and cluster size of the polyaniline thin films irradiated with swift heavy Si ions,” Vacuum, vol.82(1), pp.56-60, 2007.
O. Bayram, “Conjugated polythiophene/Ni-doped ZnO hetero bilayer nanocomposite thin films: Its structural, optical and photoluminescence properties,” Ceramics International, vol. 44(17), pp.20635-20640, 2018.
S. Kumar, S. Taneja, , S. Banyal, M. Singhal, V. Kumar, S. Sahare and R. K. Choubey, “Bio-synthesised Silver Nanoparticle-Conjugated l-Cysteine Ceiled Mn: ZnS Quantum Dots for Eco-friendly Biosensor and Antimicrobial Applications”, Journal of Electronic Materials, vol. 50(7), pp.3986-3995, 2021.
M. L. Singla, R. Sehrawat, N. Rana and K. Singh, “Dielectric behavior of emeraldine base polymer–ZnO nanocomposite film in the low to medium frequency,” Journal of Nanoparticle Research, vol.13(5), pp.2109-2116, 2011.
M. Majhi, R. B. Choudhary and P. Maji, “HCl protonated polymeric PANI-ZnS nanocomposites and measurement of their robust dielectric optical and thermal performance,” Optik, vol.136, pp.181-191, 2017.
S. Bousalem, F. Z. Zeggai, H. Baltach and A. Benyoucef, “Physical and electrochemical investigations on hybrid materials synthesized by polyaniline with various amounts of ZnO nanoparticle,” Chemical Physics Letters, vol.741, pp.137095, 2020.
A. Bahrami, K. Behzad, N. Faraji and A. Kharazmi,” Electrical characteristics of PVA-PANI-ZnS nanocomposite film synthesized by gamma irradiation method,” Materials Science-Poland, vol. 36(1), pp.102-106, 2018.
A. O. Ahmed, A. Alnehia, A. A. Qaid, H. T. Al-Ahsab and A. Al-Sharabi, “Structural, morphological and optical properties of Cr doped ZnS nanoparticles prepared without any capping agent,” Optik, vol.214, pp.164831, 2020.
H. R. Rajabi and M. Farsi, “Study of capping agent effect on the structural, optical and photocatalytic properties of zinc sulfide quantum dots,” Materials Science in Semiconductor Processing, vol.48, pp.14-22, 2016.
S. Tomar, S. Gupta, S. Mukherjee, A. Singh, S. Kumar and R. K. Choubey, “Manganese-doped ZnS QDs: an Investigation into the optimal amount of doping”, Semiconductors, vol.54(11), pp.1450-1458, 2020.
S. Kumar, H. C. Jeon, T. W. Kang, R. Singh, J. K. Sharma and R. K. Choubey, “Structural and optical properties of silica capped ZnS: Mn quantum dots”, Journal of Materials Science: Materials in Electronics, vol.26(6), pp.3939-3946, 2015.
M. Rana, and P. Chowdhury, “L-glutathione capped CdSeS/ZnS quantum dot sensor for the detection of environmentally hazardous metal ions,” Journal of Luminescence, vol.206, pp.105-112, 2019.
B. H. Zhang, F. Y. Wu, Y. M. Wu and X. S. Zhan, “Fluorescent method for the determination of sulfide anion with ZnS: Mn quantum dots”, Journal of fluorescence, vol. 20(1), pp.243-250, 2010.
A. Y. Madkhli and W. Shirbeeny, “The effect of cobalt ions doping on the optical properties of ZnS quantum dots according to photoluminescence intensity and crystalline structure,” Physica B: Condensed Matter, vol.597, pp. 412414, 2020.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2021 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
