Dynamo Line Simulation using a Hot Dip Process Simulator

ผู้แต่ง

  • E. J. Hilinski U. S. Steel Research and Technology Center
  • G.N. Walters U. S. Steel Research and Technology Center
  • R.H. Wolf U. S. Steel Research and Technology Center
  • J. Huńady U. S. Steel Košice, Research and Development Center
  • A. Magurova U. S. Steel Košice, Research and Development Center
  • M. Predmerský U. S. Steel Košice, Research and Development Center

บทคัดย่อ

Newly developed processing routines on U. S. Steel’s Hot Dip Process Simulator (HDPS) have enabled accurate simulation of the operating characteristics of a continuous electrical sheet processing line.  The two key components of the electrical steel production process simulated were decarburization and grain growth.  As the HDPS cannot process panels of a size adequate for obtaining longitudinal and transverse mini-frame (16.5 cm long) Epstein packs, new coupon test techniques for magnetic property measurement were required.  Magnetic properties measured on coupons tested in a small single sheet tester were correlated to those measured on full size (30.5 cm long) Epstein packs.  Reasonable agreement between the Epstein and coupon properties was achieved.  Magnetic properties obtained via laboratory processing and testing have agreed with those from mill processing and testing.  The HDPS electrical steel simulations are now being used to more fully explore the processing-microstructure-property interrelationships in continuously annealed electrical steels.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Larsen, A. M. R. Blotzer, R. J. Lauer, B. A. and Anderson, J. P. 2005. Magnetic Testing Methods for Motor Lamination Steels. Proceedings of the 12th Conference on Properties and Applications of Magnetic Materials, May 18th – 20th, 2005. Illinois Institute of Technology, Chicago.

Oldani, C. R. 1996. Decarburization and Grain Growth Kinetics During the Annealing of Electrical Steels. Scripta Materialia. 35 (11) : 1253-1257.

Poirier, D. R. and Geiger, G. H. Transport Phenomena in Materials Processing, TMS, Warrendale, Pennsylvania : 447.

Smith, R. P. 1962. The Diffusivity of Carbon in Alpha-Iron. Transactions of the AIME, 224 (Feb) : 105-111.

ดาวน์โหลด

เผยแพร่แล้ว

2022-08-19

วิธีการอ้างอิง

[1]
E. J. . Hilinski, G. Walters, R. Wolf, J. Huńady, A. Magurova, และ M. Predmerský, “Dynamo Line Simulation using a Hot Dip Process Simulator”, J Met Mater Miner, ปี 15, ฉบับที่ 2, น. 1–15, ส.ค. 2022.

ฉบับ

ปีที่ 15 ฉบับที่ 2 (2005)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2005 The Journal of Metals, Materials and Minerals (JMMM)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.