Mechanical Properties of Blasting Steel Sheet

ผู้แต่ง

  • Mária Mihaliková Department of Material Science, Faculty of Metallurgy, Technical Unniversity of Košice
  • Marián Buršák Department of Material Science, Faculty of Metallurgy, Technical Unniversity of Košice
  • Ján Micheľ Department of Material Science, Faculty of Metallurgy, Technical Unniversity of Košice
  • Katarína Kovalová Department of Material Science, Faculty of Metallurgy, Technical Unniversity of Košice

คำสำคัญ:

ultimate strength, yield point, roughness, hardness, blasting

บทคัดย่อ

The paper expresses the influence of blasting conditions on the properties of steel sheet RSt 37 – 2 having a the gauge of 3 mm. Due to blasting, the surface roughness increases by an order and the surface strain hardening takes place to the depth of ca 0.06 mm, which results in compressive stress on the sheet surface. The increase of the yield point is more significant if the diameter of the blasting medium (within the tested interval from 0.56 to 0.9 mm) and the impact angle (30 to 75º) are greater at an air pressure of 0.4 – 0.5 MPa.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Bačová, V. 1996. Secondary effects of blasting in sheet surface pretreatment, In. : Eurometal working 96,Bratislava : 178

Kniewald, D. 1998 .Blasting surface preparation under coatings. In : Koroze a ochrana materiálů, 32, : 42.

Sedláček, V. 1992. Surfaces and coatings of metals, In : Praha

ดาวน์โหลด

เผยแพร่แล้ว

2022-08-19

วิธีการอ้างอิง

[1]
M. Mihaliková, M. Buršák, J. Micheľ, และ K. Kovalová, “Mechanical Properties of Blasting Steel Sheet”, J Met Mater Miner, ปี 15, ฉบับที่ 2, น. 53–56, ส.ค. 2022.

ฉบับ

ปีที่ 15 ฉบับที่ 2 (2005)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2005 The Journal of Metals, Materials and Minerals (JMMM)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.