Compressive properties and imaging analysis of a new metal foam-natural rubber hybrid structure

ผู้แต่ง

  • Abhay Chaturvedi Homi Bhabha National Institute, Mumbai, India
  • Gopal Sanyal Bhabha atomic research centre, Mumbai, India
  • Shashank Chaturvedi Homi Bhabha National Institute, Mumbai, India
  • A.S. Patil Bhabha atomic research centre, Mumbai, India

คำสำคัญ:

Aluminum foam, hybrid, energy absorption, compressive, strain recovery, natural rubber

บทคัดย่อ

In this study an attempt has been made to create a new hybrid structure. The hybrid structure has been made by hierarchically combining closed cell Aluminum foam and natural rubber. The hybrid structure, when subjected to compressive loading, displayed improved energy absorption characteristics compared to its parent monoliths. It also displayed significant strain recovery post deformation. High resolution imaging was also carried out to compare the internal structure of hybrid samples before and after compression. Critical discussion of the experimental results has been made.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

Abhay Chaturvedi, Homi Bhabha National Institute, Mumbai, India

Scientist working in the field of development of hybrid materails for enhanced energy absorption materials.

Gopal Sanyal, Bhabha atomic research centre, Mumbai, India

Scientist, working in the field of mechanical metullargy

Shashank Chaturvedi, Homi Bhabha National Institute, Mumbai, India

Senior Scientist, expertises in high strain rate behaviour of materials

A.S. Patil, Bhabha atomic research centre, Mumbai, India

Scientist, expertises in fabrication

เอกสารอ้างอิง

Ashby, M.F. and Brechet, Y.J.M. (2003). Designing hybrid materials. Acta Mater. 51: 5801-5821.

Banhart, J. and Weaire, D. (2002). On the road again: Metal foams find favor Physics Today 37-42.

Cheng, H.F. and Han, F.S. (2003). Compressive behavior and energy absorbing characteristic of open cell aluminum foam filled with silicate rubber. Scr. Mater. 49 : 583-586.

Cluff, D.R.A. and Esmaeili, S. (2009). Compressive properties of a metal-polymer hybrid material. J. Mater. Sci. 44 : 3867-3876.

Zhenrong, L., Yuan, L. and Feng, T.Y. (2014). Analysis and experimentation research of static compressive mechanical test of foam aluminum composite. Adv. Mater. Res. 1030- 1032 : 16-19

Kishimoto, S, and Shinya, N. (2001) Mechanical property of Metallic Closed Cellular Materials Containing Organic Material for Passive Damping and Energy-Absorbing Systems. Journal of Intelligent Material Systems and Structures 12(4) :.271-275.

Kishimoto, S., Shimizu, T. and Yin, F. (2010). Mechanical properties of metallic closed cellular materials containing polymer fabricated by polymer penetration. Mater. Sci. Forum. 654-656 : 2628-2631.

Kishimoto, S., Wang, Q., Tanaka, Y. and Kagawa, Y. (2014). Compressive mechanical properties of closed-cell aluminum foam-polymer composites.Composites. 64(B) : 43-49.

Yu, L., and Xiao-lu, G. (2006). Compressive behavior and energy absorption of metal porous polymer composite with interpenetrating network structure Trans.Nonferrous. Met. Soc. China 16 : 439-443

Yu, J.L., Li, J.R. and Hu, S.S. (2006). Strain –rate effect and micro –structural optimization of cellular metals. Mechanics of Materials 38: 160-170.

Stobener, K. and Rausch, G. (2009). Aluminum foam –polymer composites: processing and characteristics J. Mater. Sci. 44 : 1506- 1511.

Parkyn, B. (1973). Designing with Composite materials The institute of Mechanical Engineers London ISBN 0-85298-7, 0-85298193-7: 9-13

ดาวน์โหลด

เผยแพร่แล้ว

2016-06-30

วิธีการอ้างอิง

[1]
A. Chaturvedi, G. Sanyal, S. Chaturvedi, และ A. Patil, “Compressive properties and imaging analysis of a new metal foam-natural rubber hybrid structure”, J Met Mater Miner, ปี 26, ฉบับที่ 2, มิ.ย. 2016.

ฉบับ

ปีที่ 26 ฉบับที่ 2 (2016)

บท

Original Research Articles

การอนุญาต

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.