Extraction of tin from hardhead by oxidation and fusion with sodium hydroxide

ผู้แต่ง

  • Chudhalak Bunnakkha Graduate student, Department of Metallurgy Engineering
  • Charkorn Jarupisitthorn Faculty of Engineering, Chulalongkorn University

คำสำคัญ:

Tin, Tin–iron alloy, Hardhead, Oxidation, Sodium hydroxide fusion, Leaching

บทคัดย่อ

In this research work, the extraction of tin from tin-iron alloy or hardhead which is the intermediate product obtained during tin smelting was investigated. The hardhead containing 32.40 wt% Sn and 45.81 wt% Fe was ground to different sizes and oxidized at 500 to 800ºC for 1 to 6 hours to form SnO2 and Fe2O3. The results indicated that an increase in oxidation temperature decreased the required oxidation time. However using too high oxidation temperature (800ºC) resulted in sintering of the oxide product. In sodium hydroxide fusion stage, effects of fusion temperature, fusion time, NaOH quantity and oxide product size on tin leaching were investigated. By fusion the oxide product of -400+500 mesh size with 750 % excess NaOH at 700 C for 2 hours in order to convert SnO2 into soluble form of Na2SnO3,it was found that around 96 % of tin could be extracted by hot water (60ºC) while the iron oxide remained in residues.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Wright, P. A. (1966). Extractive metallurgy of tin.New York:American Elsevier Seientific Publ. Co.

Wright, P. A.(1982). Extractive metallurgy of tin. 2nd ed. New York : Elsevier Scientific Publ. Co.

Pourbaix, M. (1974). Atlas of electrochemical equilibria in aqueous solutions. 2nd ed. National Association of corrosion engineers. : 307-313, 476-479.

Thongbo, S. and Jarupisitthorn, C. (2010). Extraction of tin from hardhead by hydrochloric acid leaching. Eng. J. 2(4) : 17-26.

Jarupisitthorn, C., Arunsap, P. and Piriyawat, A. (1995). Extraction of Tin from Tin Sludge by Sodium Hydroxide Leaching. J. Met. Mater. Miner. 5(1) : 59-63.

Jun, W. S., Yun, P. S. and Lee, E. C. (2004). Leaching behavior of tin from sn-fe alloys in sodium hydroxide solutions. Hydrometallurgy. 73(1-2) : 71-80.

Veerothai, P. (1983). The removal of arsenic from tin-roaster dust. Beneficiation of tin and associated minerals. S. Asian. Res. Dev. Center. Technical Publication. 3 : 277-283.

Yangyuen, P. (2001). Extraction of tin from roaster dust by alkaline leaching. Master Thesis. Dept. Met. Eng. Grad. School.Chulalongkorn Univ, Bangkok.

Choosri, P., Crowe, A. J. and Ratcliffe, J. (1990). Preliminary study on the production of tin chemicals from cassiterite. Annu. Conf. Dept. Miner. Res. Bangkok. : 261-263.

ดาวน์โหลด

เผยแพร่แล้ว

2012-06-30

วิธีการอ้างอิง

[1]
C. Bunnakkha และ C. Jarupisitthorn, “Extraction of tin from hardhead by oxidation and fusion with sodium hydroxide”, J Met Mater Miner, ปี 22, ฉบับที่ 1, มิ.ย. 2012.

ฉบับ

ปีที่ 22 ฉบับที่ 1 (2012)

บท

Original Research Articles

การอนุญาต

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.