Purification of an industrial aluminum alloy by melt stirring during Ohno Continuous Casting process
คำสำคัญ:
Segregation, Impurities, Computer Simulation, Purification, Stirringบทคัดย่อ
With the purpose of upgrading the purity of a dilute industrial aluminum alloy during Ohno Continuous Casting (OCC) process through the use of forced melt stirring; the critical stirring intensity required under a casting speed of 2 mm/min was numerically determined. The determined critical stirring intensity induces convective velocity magnitudes into the melt which are effective in transporting solutes from the solute boundary layer into the bulk melt. It was found that, with adequate melt stirring, production of substantially long and high purity ingots during OCC is possible before their purity diminishes to lower than the initial alloy purity.Downloads
เอกสารอ้างอิง
Hashimoto, E., Ueda, Y. & Kino, T. (1995). Purification of ultra-high purity aluminum. J. Phys. IV France 5(C7): 153-157.
Jie, W. (2001). Solute redistribution and segregation in solidification processes. Sci. Technol. Adv. Mat. 2(1): 29-35.
Tiller, W.A., Jackson, K.A., Rutter, J.W. & Chalmers, B. (1953). The redistribution of solute atoms during the solidification of metals. Acta Metall. 1(4): 428-437.
Willers, B., Eckert, S., Nikrityuk, P.A., Räbiger, D., Dong, J. Eckert, K. & Gerberth, G. (2008). Efficient melt stirring using pulse sequences of a rotating magnetic field: Part II. application to solidification of Al-Si alloys. Metall. Mater. Trans. B 39(2): 304-316.
Mullin, J.B. & Hulme, K.F. (1958). The use of electromagnetic stirring in zone refining. Int. J. Electron. 4(2): 170-174.
Soda, H., McLean, A., Wang, Z. and Motoyasu, G. (1995). Pilot-scale casting of single-crystal copper wires by the Ohno continuous casting process. J. Mater. Sci. 30(21): 5438-5448.
Ohno, A. (1986). Continuous casting of single crystal ingots by the OCC process. Journal of Metals 38(1): 14-16.
Soda, H., McLean, A., Motoyasu, G. & Ohno, A. (1995). Ohno continuous casting. Adv. Mater. Process. 147(4): 43-45.
Bennon, W.D. & Incropera, F.P. (1987). A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems—I. Model formulation. Int. J. Heat Mass Tran. 30(10): 2161-2170.
Prescott, P.J., Incropera, F.P. & Bennon. W.D. (1991). Modeling of dendritic solidification systems: reassessment of the continuum momentum equation. Int. J. Heat Mass Tran. 34(9): 2351–2359.
Voller, V. R. & Swaminathan, C. R. (1991). ERAL Source-based method for solidification phase change. Numer. Heat Tr. B-Fund. 19(2): 175-189.
Patankar, S.V. (1980). Numerical heat transfer fluid flow. NewYork, NY: Hemisphere: 96-102.
J.D.Verhoeven, Trans.AIME. 242 (1968) 1937- 1942.
Lee, J.H., Liu, S., Miyahara, H. & Trivedi, R. (2004). Diffusion-coefficient measurements in liquid metallic alloys. Metall. Mater. Trans. B 35(5): 909-917.
Diao, Q.Z. & Tsai, H.L. (1993). Modeling of solute redistribution in the mushy zone during solidification of aluminum-copper alloys. Metall. Mater. Trans. A 24(4): 963.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2017 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
