Recovery of zinc from the spent zinc-carbon dry cell batteries through pyrometallurgical route

ผู้แต่ง

  • Majharul Haque Khan Materials and Metallurgical Engineering Department, Bangladesh University of Engineering and Technology
  • A.S.W. Kurny Materials and Metallurgical Engineering Department, Bangladesh University of Engineering and Technology

บทคัดย่อ

Spent zinc-carbon batteries of all the five types (AAA, AA, C, D and 9V) were processed to recover zinc metal. All the components of the battery were separated, chemically analyzed and the anodic zinc parts were subjected to pyrometallurgical processing. Extraction of zinc was negligible when no fluxing agent was used. However, extent of recovery increased significantly when chloride salts: sodium chloride, calcium chloride and ammonium chloride were used as a fluxing agent. Among these, ammonium chloride gave the best result as flux. Using 10 %wt. of each flux, extraction of zinc was 90% for ammonium chloride, and around 75% for both sodium chloride and calcium chloride. A maximum 92% extraction of total zinc with purity over 99.5% could be obtained in presence of 12%wt. ammonium chloride flux by heating at 600°C for 10 minutes.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Rabah, M.A. and Sayed, A.S. El. (1995). Recovery of zinc and some of its valuable salts from secondary resources and wastes. 37 : 23-32.

Strobos, J.G. and Friend, J.F.C. (2004). Zinc recovery from baghouse dust generated at ferrochrome foundries. 74 : 165-171.

Sayilgan, E., Kukrer, T., Yigit, N.O., Civelekoglu, G. and Kitis, M. (2010). Acidic leaching and precipitation of zinc and manganese from spent battery powders using various reductants. J. Hazard. Mater. 173:137-143.

Michelis, I., Ferella, F., Karakaya, E., Beolchini, F. and Vegilo, F. (2007). Recovery of zinc and manganese from alkaline and zinccarbon spent batteries. J. Power. Sources. 172 : 975-983.

Baba, A. A., Adekola, A. F. and Bale, R. B. (2009). Development of a combined pyro - and hydro - metallurgical route to treat spent zinc - carbon batteries. J. Hazard. Mater. 171 : 838-844.

Bernades, A. M., Espinosa, D. C. R. and Tenorio, J.A.S. (2004). Recycling batteries: a review of processes and technologies. J. Power Sources. 130 : 291-298.

Rabah, M. A., Barakat, M. A. and Mahrous, Y.Sh. (1999). Recovering metal values hydrometallurgically from spent dry battery cells. JOM. 51(12).

Bright, M.A., Deem, N.J. and Fryatt, J. (2007). The advantage of recycling metallic zinc from the processing wastes of industrial molten zinc applications., TMS.

Barakat, M.A. (2003). The pyrometallurgical processing of galvanizing zinc ash and flue dust., research summary. JOM.

Souza, C. C. B. M., Oliveira, D. C. a nd Tenorio, J. A. S. (2001) . Characterization of used alkaline batteries powder and analysis of zinc recovery by acid leaching. J. Power. Sources. 103 : 120-126.

ดาวน์โหลด

เผยแพร่แล้ว

2011-12-31

วิธีการอ้างอิง

[1]
M. Haque Khan และ A. . Kurny, “Recovery of zinc from the spent zinc-carbon dry cell batteries through pyrometallurgical route”, J Met Mater Miner, ปี 21, ฉบับที่ 2, ธ.ค. 2011.

ฉบับ

ปีที่ 21 ฉบับที่ 2 (2011)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 วารสารโลหะ, วัสดุ และแร่

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.