Corrosion assessment of carbon steel in Thailand by atmospheric corrosion monitoring (ACM) sensors

ผู้แต่ง

  • Wanida Pongsaksawad National Metal and Materials Technology Center (MTEC), Pathumthani
  • Ekkarut Viyanit National Metal and Materials Technology Center (MTEC), Pathumthani
  • Sikharin Sorachot National Metal and Materials Technology Center (MTEC), Pathumthani
  • Tadashi Shinohara National Institute for Materials Science, Ibaraki

คำสำคัญ:

Atmospheric corrosion, ACM sensor, Carbon steel

บทคัดย่อ

Atmospheric corrosion of metal depends on material compositions, weather condition (dry, dew, and rain period), temperature, relative humidity, and airborne sea salt of specific location. General testing procedure to obtain the corrosion rate is by actual exposure test of the specimen panels based on time interval plan. In Japan, atmospheric corrosion monitoring (ACM) sensor, made of an iron-silver galvanic couple, has been developed and used to sense the corrosivity in terms of galvanic current. Under some atmospheric conditions, these data can be converted to time of wetness and related to the corrosion rate of carbon steel. With ACM sensors, it is possible to monitor the corrosion rate in a shorter time than the exposure test. To apply the ACM sensors in Thailand, it is necessary to evaluate the effectiveness and correlation between the actual corrosion rate and the sensor output. In this research during June 2007 – May 2009, we performed exposure tests of carbon steel (JIS SS400) along with ACM sensors under outdoor and sheltered conditions at three locations: (1) Rama VI Road, Bangkok (2) Suvarnabhumi International Airport, Samutprakarn and (3) Royal Thai Navy Dockyard, Chonburi, representing urban, airport, and marine environments, respectively. Weather data were obtained from temperature, relative humidity, and ACM sensors. To estimate the corrosion rate, weight loss measurements were carried out on specimens exposed for 1 month period over 2 years. Average monthly weight loss ranks from high to low as marine, airport, and urban environments. The relationship between outdoor corrosion rate and ACM output is found to be linear on a log-log scale at airport and urban test stations during March 2008 – May 2009.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Bhamornsut, C., Chotimongkol, L., Nakkuntod, R., Suphonlai, S., Jeenkhajohn, P., Kodama, T. & Tanabe, H. (2003). Atmospheric degradation of organic coatings in Thailand. In : Proceeding of Japan Society of Corrosion Engineers Conference. November 16-21, Japan.

Chen, Y.Y., Tzeng, H.J., Wei, L.I., Wang, L.H., Oung, J.C. & Shih, H.C. (2005). Corrosion resistance and mechanical properties of low-alloy steels under atmospheric conditions. Corros. Sci. 47(4) : 1001-1021.

Daopiset, S., Wanaosod, P., Hang, T.T.X. & Truc, T.A. (2008). Atmospheric corrosion of stainless steels 304 and 316 with different surface finishes. In : Proceeding of the 5th Thailand Materials Science and Technology Conference. September 16-19, Thailand.

De La Fuente, D., Castaño, J.G. & Morcillo, M. (2007). Long-term atmospheric corrosion of zinc. Corros. Sci. 49(3) : 1420–1436.

Han, W., Yu, G., Wang, Z. & Wang, J. (2007). Characterisation of initial atmospheric corrosion carbon steels by field exposure and laboratory simulation. Corros. Sci. 49(7) : 2920–2935.

Katayama, H., Noda, K., Masuda, H., Nagasawa, M., Itagaki, M. & Watanabe, K. (2005). Corrosion simulation of carbon steels in atmospheric environment. Corros. Sci. 47(10) : 2599–2606.

Lien, L.T.H., San P.T. & Hong, H. L. (2009). Atmospheric corrosion of carbon steel in Vietnam: The relationship between corrosion rate and environmental parameters ; the classification of atmospheric corrosivity of carbon steel. In : Proceedings of Japan Society of Corrosion Engineers Conference. May 22-24, Japan. A305.

Motoda, S., Suzuki, Y., Shinohara, T., Kojima, Y., Tsujikawa, S., Oshikawa, W., Itomura, S., Fukushima, T. & Izumo, S. (1994). ACM (Atmospheric Corrosion Monitor) type corrosion sensor to evaluate corrsivity of marine atmosphere. Zairyo to Kankyo. 43(10) : 550-556.

Nishikata, A., Suzuki, F. & Tsuru, T. (2005). Corrosion monitoring of nickel-containing steels in marine atmospheric environment. Corros. Sci. 47(10) : 2578–2588.

Panther, B.C., Hooper, M.A., Ayers, G.P., Cole, I., Limpaseni, W., Somboon, W., Veersai F. & Veersai, W. (2003). Atmospheric depositions and corrosion impacts in Bangkok. In : Proceedings of the 2nd Regional Conference on Energy technology Towards a Clean Environment. February 12-14, Phuket, Thailand. 2 : 675-683.

Pongsaksawad, W., Sorachot, S., Troset, J., Viyanit, E. & Shinohara, T. (2009). Applying atmospheric corrosion monitoring sensor for carbon steel under various exposure test sites in Thailand. In : Proceedings of Japan Society of Corrosion Engineers Conference. May 22-24, Japan. A304.

Pourbaix, M. (1982). The linear bilogarithmic law for atmospheric corrosion. New York, NY : Wiley: pp. 107-121.

Shinohara, T., Tahara A. & Hosoya, Y. (2006). Datasheets of atmospheric corrosion behaviors of low alloyed steels with corrosivities at exposure test sites. In : Proceedings of the 3rd International Conference on Advanced Structural Steels. August 22-24, Gyeongju, Korea.

Shitanda, I., Okumura, A., Itagaki, M., Watanabe, K. & Asano, Y. (2009). Screen-printed atmospheric corrosion monitoring sensor based on electrochemical impedance spectroscopy. Sensor. Actuat. B : Chem. 139(2) : 292–297.

Singh, D.D.N., Yadav, S. & Saha, J.K. (2008). Role of climatic conditions on corrosion chacteristics of structural steels. Corros. Sci. 50(1) : 93–110.

Sun, S., Zheng, Q., Li, D. & Wen, J. (2009). Long-term atmospheric corrosion behaviour of aluminium alloys 2024 and 7075 in urban, coastal and industrial environments. Corros. Sci. 51(4) : 719–727.

Tahara, A. & Shinohara, T. (2005). Influence of the alloy element on corrosion morphology of the low alloy steels exposed to the atmospheric environments. Corros. Sci. 47(10) : 2589–2598.

Veleva, L., Acosta, M. & Meraz, E. (2009). Atmospheric corrosion of zinc induced by runoff. Corros. Sci. 51(9) : 2055–2062.

Wall, F.D., Martinez, M.A. Missert, N.A., Copeland, R.G. & Kilgo, A.C. (2005). Characterizing corrosion behavior under atmospheric conditions using electrochemical techniques. Corros. Sci. 47(1) : 17-32.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-15

วิธีการอ้างอิง

[1]
W. Pongsaksawad, E. . Viyanit, S. Sorachot, และ T. . Shinohara, “Corrosion assessment of carbon steel in Thailand by atmospheric corrosion monitoring (ACM) sensors”, J Met Mater Miner, ปี 20, ฉบับที่ 2, เม.ย. 2017.

ฉบับ

ปีที่ 20 ฉบับที่ 2 (2010)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.