Kinetics of carbonisation, microstructure and properties of Al-Al<sub>4</sub>C<sub>3</sub> system prepared by mechanical alloying

ผู้แต่ง

  • Michal Besterci Institute of Materials Research

##plugins.pubIds.doi.readerDisplayName##:

https://doi.org/10.55713/jmmm.v16i1.245

คำสำคัญ:

aluminium-graphite powder system, mechanical alloying, carbon to Al4C3 transformation, microstructure, mechanical properties

บทคัดย่อ

The method of mechanical alloying process is described. Carbon transformation to carbide Al4C3 is characterised within different heat treatment schedules and nine commercial carbon powders are tested. The micromechanism of carbon incorporation into the metallic powder, and the compacting of it are described. The influence of dispersed carbides on mechanical properties is evaluated together with the influence of deformation on microstructure and properties.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

เอกสารอ้างอิง

(1) Besterci, M. 1999. Dispersion strengthened Al prepared by mechanical alloying. Cambrige, Int. Science Publ.

(2) Weissgäerber, T. and Kieback, B. 2000. Materials Science Forum.8 : 275.

(3) Korb, G. Jangg, G. and Kutner, F. 1975. Draht.30 : 318.

(4) Jangg, G., Kutner, F. and Korb, G. 1975. Aluminium.51 : 641.

(5) Besterci, M., Šlesár, M., Jangg, G., Miškovičová, M. and Ďurišin, J. 1989. Kovové Mat. 27(1) : 77.

(6) Jangg, G., Šlesár, M., Besterci, M. and Zbiral, J. 1989. Zeischrift f. Werkstofftechnik.20 : 226.

(7) Besterci, M. 2006. Materials and Design. 27 : 416

(8) Saxl, I., Besterci, M. and Pelikán, K. 1986. Pokroky práškové metalurgie. 3.

(9) Saxl, I., Pelikán, K., Rataj J. and Besterci, M. 1995. Quantification and Modelling of Heterogenous Systems. Cambridge, Int. Publication.

(10) Besterci, M., Kohútek, I., Saxl, I. and Sülleiová, K. 1999. J. Mater. Sci.34 : 1055.

(11) Okabe, A. Boots, B. and Sugihara, K. 1992. Spatial Tessellation. Chichester, J. Wiley.

(12) Besterci, M., Zrník, J. and Šlesár, M. 1997. Kovové Mater.35 : 344.

(13) Besterci, M., Velgosová, O., Ivan, J. and Kováč, L. 2001. Kovové Mater.39 : 309.

(14) Mishra, R. S. and Mukherjee, A. K. 1997. Mater. Sci. Eng.A234-236 : 1023.

(15) Higashi, K. 1993. Mater. Sci. Eng.A166 : 109. (16) Besterci, M., Velgosová, O., Kováč, L. and Ivan, J. 2003. Mater.s Sci. Forum. 416-418 : 207.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-16

วิธีการอ้างอิง

[1]
M. Besterci, “Kinetics of carbonisation, microstructure and properties of Al-Al<sub>4</sub>C<sub>3</sub> system prepared by mechanical alloying”, J Met Mater Miner, ปี 16, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 16 ฉบับที่ 1 (2006)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.