The influence of the strain rate on the material properties of the zinc-coated sheet

ผู้แต่ง

  • Zuzana Vadasovà Faculty of Metallurgy, Technical University of Košice
  • Mária Mihaliková Faculty of Metallurgy, Technical University of Košice

คำสำคัญ:

low alloyed steel, cold forming, ductility

บทคัดย่อ

In this paper the influence of the strain rate on the material properties of the zinc-coated sheet of the thickness (1; 1.5; 1.8) mm made from low-alloyed steel ZINKODUR 340 was analyzed. Increasing the strain rate is one of the possible ways to increase cold mechanical work in products. The tensile test is the most useful method for determining the material characteristic such as ductility. This contribution analyzes the influence of loading rate in range from 1 to 1000mm/min on material characteristics of tested steel during the tensile test. Strain rate is one of the most significant factors, which affected material behavior during the forming and resultant properties of wrought products. Intensity of this influence is function of internal composition of the steel.

##plugins.generic.usageStats.downloads##

##plugins.generic.usageStats.noStats##

เอกสารอ้างอิง

Miche, J. 1995. Materiálové inžinierstvo, 2(4) : 57.

Hon Eycombe, R. W., K-Pickering, F. B. 1972. Metallurgical Trans. 3 : 1099.

Čižmárová, E., Miche, J. 2003. Acta Metallurgica Slovaca. 9(2) : 90.

Bidulský, R., Dudrová, E.2001. Acta Metallurgica Slovaca. 7 : (spec.iss) s.539-541

Bidulský, R., Dudrová, E., Kabátová, M., Rodziňák, D. 2005. Materiál v inžinierskej praxi, Herľany, 11.-13.5.2005. Košice : HF TU 2005, s.17.

Michel, J. 1994. Oceľové plechy. 21 : 15.

Buršák, M., Mamuzič, I., Mihaliková, M. 2004. Metalurgija. 43(2) : 101.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-16

วิธีการอ้างอิง

[1]
Z. . Vadasovà และ . M. Mihaliková, “The influence of the strain rate on the material properties of the zinc-coated sheet”, J Met Mater Miner, ปี 16, ฉบับที่ 2, เม.ย. 2017.

ฉบับ

ปีที่ 16 ฉบับที่ 2 (2006)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.