Zn coatings for temporary protection applied by peening technology

ผู้แต่ง

  • Janette Brezinnová Mechanical Engineering Faculty, Technical University

คำสำคัญ:

Zn coating, surface protection, peening technology

บทคัดย่อ

This paper presents actual investigation results of an experiment that aimed at verifying the possibility of applying zinc on steel surface by peening technology using zinc-coated cut wire. A suitable method for obtained zinc layers and evaluation of their corrosion resistance was determined. Accelerated laboratory tests with presence of SO2 and long term working tests in atmospheric conditions were used. Creation of incoherent zinc coatings was established on the bases of metallographic and spectral analysis. The process of cold zinc by peening may serve as temporary anticorrosion protection of steel surface.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Kalendová, A. et al. 2003. Acta Mechanica Slovaca. 4-A : 97-102.

Kniewald, D., Brezinová, J. 2003. 35th International Conference on Coatings Technology. ČR, Pardubice. : 489-496.

Kováč, J. et al. 2002. Corrosion and protection of material. 5 : 103-107.

.Kalendová, A. 1998. Anticorrosive spinel-type pigments of the second gener. AntiCorrosion Methods Mater. 45 : 344-349.

Kováč, J., Brezinová, J., Kniewald, D. 2001. Acta Metallurgica Slovaca. 7(2) : 177-183.

.Skočovský, P. et al. 2001. Theory about material for engineering specialization. University of Žilina. : 167-171.

Zerust Worldwide Corrosion Prevention. www.fatrani.cz

Kalenda, P. et al. 2005. Acta Mechanica Slovaca. 9(3) : 93-98.

Brezinová, J. 2002. The study of blasting process regularity from the aspect of degradation phenomenons. Master Thesis. Technical University of Košice.

Kalendová, A. et al. 2005. CHEMagazín. No.1 : 24-27.

Kniewald, D., Brezinová, J. 2003. Study of process cold zinc by peening, CO-MATTECH Trnava : 485-488.

Brezinnová J. 2003. Acta Mechanica Slovaca. No.4-A : 29-32.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-23

วิธีการอ้างอิง

[1]
J. Brezinnová, “Zn coatings for temporary protection applied by peening technology”, J Met Mater Miner, ปี 17, ฉบับที่ 2, เม.ย. 2017.

ฉบับ

ปีที่ 17 ฉบับที่ 2 (2007)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.