Effect of glass fiber length and content on mechanical properties of polybutylene terephthalate

ผู้แต่ง

  • P. Threepopnatkul Faculty of Engineering and Industrial Technology, Silpakorn University
  • N. Faculty of Engineering and Industrial Technology, Silpakorn University
  • W. Prom-Oh Faculty of Engineering and Industrial Technology, Silpakorn University
  • C. Kulsetthanchalee Event and Exhibition Design Department, Suan Dusit University

คำสำคัญ:

PBT, Glass fiber, Flexural properties, Impact strength

บทคัดย่อ

The effect of glass fiber (GF) length and content were studied on mechanical properties of polybutylene terephthalate (PBT). The glass fiber was found to be highly compatible with PBT. The PBT/6 mm GF 30% composite possessed the highest flexural modulus (FM) and flexural strength (FS). The FM and FS were increased with the increasing of GF content. The longer glass fiber resulted in the higher value of FM and FS but hardly affected on the deflection and unnotched izod impact strength of the composites. The impact strength of composites was drastically decreased with the addition of glass fiber as compared with neat PBT.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

P. Threepopnatkul, Faculty of Engineering and Industrial Technology, Silpakorn University

Department of Materials Science and Engineering,

Faculty of Engineering and Industrial Technology

เอกสารอ้างอิง

Gallo E., Braun U., Schartel B., Russo P., and Acierno D. (2009). Polym Degrad and Stabil 94: 1245-1253.

Mohd Ishak Z.A., Ariffin A., and Senawi, R. (2001). Eur Polym. J. 37: 1635-1647.

Hajiraissi R. and Parvinzadeh M. (2001). Appl Surf Sci. 257: 8443-8450.

Hashem, S. (2011). Polym i. Test. 30: 801-810.

Thomason J. L., and Vlug M. A. (1996). Composites A. 27: 477-484.

Friedrich K., Evstatiev M., Fariov S., Evstatiev O., Ishii M., Harrass M.. (2005). Comp Sci and Tech. 65: 107-116.

ดาวน์โหลด

เผยแพร่แล้ว

2017-09-21

วิธีการอ้างอิง

[1]
P. Threepopnatkul, N., W. Prom-Oh, และ C. Kulsetthanchalee, “Effect of glass fiber length and content on mechanical properties of polybutylene terephthalate”, J Met Mater Miner, ปี 27, ฉบับที่ 1, ก.ย. 2017.

ฉบับ

ปีที่ 27 ฉบับที่ 1 (2017)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.