Properties of natural rubber latex filled with bacterial cellulose produced from pineapple peels

ผู้แต่ง

  • Thanunya Saowapark Research Center of Agriculture Residue Products and Biomaterials, Nakhon Pathom Rajabhat University
  • Ekrachan Chaichana Research Center of Agriculture Residue Products and Biomaterials, Nakhon Pathom Rajabhat University
  • Adisak Jaturapiree Research Center of Agriculture Residue Products and Biomaterials, Nakhon Pathom Rajabhat University

คำสำคัญ:

Natural rubber latex, Bacterial cellulose, Pineapple peel, Filler

บทคัดย่อ

Bacterial cellulose (BC) is natural biopolymers with unique properties such as high purity and high tensile strength. These properties considerably support for use as filler in rubber applications.  In this research, BC was produced from fermentation by Acetobacter xylinum. Additionally, pineapple peels (agricultural waste) were evaluated for carbon sources in BC’s production process. Natural rubber latex (NRL) compound was then incorporated BC with various loadings of 0, 5, 10 and 15 phr (parts per hundred of rubber) for enhancement properties of NRL. Furthermore, NRL filled with BC (NRL-BC) compounds were prevulcanized at 70°C for 2 hours and then NRL-BC sheets were finally prepared.  NRL-BC sheets were examined in the term of, tensile properties, tear strength, and dynamic mechanical properties (DMA). From the results, with incorporation of BC, it was observed that not only tensile strength, tensile modulus and tear strength slightly increased but also DMA result clearly showed increase in storage modulus. Moreover, results revealed that NRL containing 10 phr of BC provided optimum properties.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Wolff, S. (1996). Chemical Aspects of Rubber Reinforcement by Fillers. Rubber Chemand Technol. 69:325-346.

Sobby, M.S.,El-Nashar, D.E. and Maziad, N.A. (2003).Cure characteristics and physicomechanical properties of carbonized bamboo fibre filled natural rubber vulcanizates. Egypt J Solids.26: 241-257.

Goharpey, F., Mirzadeh, A., Sheikh, A. and Nazockdast, H., and Katbab, A. (2009). Study on microstructure, rheological, and mechanical roperties of cellulose short fiber reinforced T PVs based on EPDM/PP. Polym Composite. 30: 182-187.

Cataldo, F., Ursini,O.,Lilla,E. and Angelini,G. (2009). A comparative study on the reinforcing effect of aramide and PET short fibers in a natural rubber based composite. J Macromol Sci B.48 : 1241-1251.

Jayalatha, G. and Kutty, S.K.N. (2013). Effect of short nylon-6 fiber on natural rubber-toughened polystyrene. Mater Des. 43: 291-298.

Sombatsompop, N., Thongsang, S ., Markpin, T.and Wimolmala, E. (2004). Fly ash particles and precipitated silica as fillers in rubbers.I. Untreated fillers in natural rubber and styrene–butadiene rubber compounds. J of Appl Polym Sci. 93: 2119-2130.

Sae-Oui, P., Rakdee, C., and Thanmathorn, P. (2002). Use of rice husk ash as filler in natural rubber vulcanizates: In comparison with other commercial fillers. J. Appl. Polym. Sci. 83: 2485–2493.

Volodkar, M. and Thakore,S.I. (2012). Biopolymers as effective fillers in natural rubber : Composites versus biocomposites. J. Appl. Polym. Sci. 124: 3815-3820.

Eliane, T.,Antonio, J.F.C., Sidney J.L.R., and Alessandro G. (2013). Simple green approach to reinforce natural rubber with b a ct erial cellu los e na nofib ers. Biomacromolecules. 14: 2667-2674.

Su, M.Y., Ji, E. and Hye, R. K. (2016). Production and characterization of bacterial cellulose fabrics bynitrogen sources of tea and carbon sources of sugar Process Biochemistry.Available online 2 July.

Sherif, K. (2014). Bacterial Cellulose Production and its Industrial Applications. Bioproces Biotechniq. 4: 1000150.

Rafael, L.O., Júlia, G.V.,Hernane, S.B., Rosana M.N.A.,Guimes, R.F., Sidney, J.L.R. and Younes, M. (2015). Synthesis and Characterization of Methylcellulose Produced from Bacterial Cellulose under Heterogeneous Condition. J Braz Chem Soc. 26: 1861-1870.

Kohjiya, S. and Ikeda, Y. (2000) . Reinforcement of General-Purpose Grade Rubbers by Silica Generated In Situ Rubber Chem Technol. 73: 534-550.

Poh, B.T., Ismail, H. and Tan, K.S. (2002). Effect of filler loading on tensile and tear properties of SMR L/ENR 25 and SMR L/SBR blends cured via a semiefficient vulcanization system. Polym Test. 21: 801-806.

Trovatti, E., Capote, T.S.O., ScarelCaminaga, R.M., Carvalho, A.J.F. and Gandini, A.(2015). Development and characterization of natural rubber and bacterial cellulose-sponge composites. World Journal of Pharmacy and Pharmaceutical. 4: 220-235.

ดาวน์โหลด

เผยแพร่แล้ว

2018-06-25

วิธีการอ้างอิง

[1]
T. . Saowapark, E. Chaichana, และ A. Jaturapiree, “Properties of natural rubber latex filled with bacterial cellulose produced from pineapple peels”, J Met Mater Miner, ปี 27, ฉบับที่ 2, มิ.ย. 2018.

ฉบับ

ปีที่ 27 ฉบับที่ 2 (2017)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.