Recent developments in the field of metal foam-polymer hybrid materials: A brief overview

ผู้แต่ง

  • Abhay Chaturvedi Homi Bhabha National Institute, Mumbai, India

คำสำคัญ:

Metal foam, Polymer, Hybrid, Interface, Mechanical property

บทคัดย่อ

In this paper, a brief overview of the various techniques employed for the preparation of metal foam-polymer hybrid/composite materials including infiltration/penetration and adhesive joining is given. Scanning electron microscopy (SEM) micro structural characterization method and various dependent mechanical properties such as stress-strain diagram, energy absorption etc is described. In addition, some possible applications of such materials are discussed. The paper intends to inform as well as educate the reader about the various aspects of this emerging field in a lucid manner.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

Abhay Chaturvedi, Homi Bhabha National Institute, Mumbai, India

Scientific Officer and a Research scholar working in the field of development of hybrid materails for enhanced energy absorption materials.

เอกสารอ้างอิง

D. R. A. Cluff and S. Esmaeili, “Compressive properties of a new metal- polymer hybrid material,” Journal of Materials Science, vol. 44, pp. 3867-3876, 2009.

A. Chaturvedi, G. Sanyal, S. Chaturvedi, and A. S. Patil, “Compressive properties and imaging analysis of a new metal foam-natural rubber hybrid structure,” Journal of Minerals, Metallurgy and Materials, vol. 26, pp. 27-30, 2016.

K. Stobener, D. Lehmhus, M. Avalle, L. Peroni, and M. Busse, “Aluminum foampolymer hybrid structures (APM aluminum foam) in compression testing,” International Journal of Solids and Structures, vol. 45, pp. 5627-5641, 2008.

Z. Yuan, N. Rayess, and N. Dukhan, “Modelling of the mechanical properties of a polymer-metal foam hybrid,” Procedia Materials Science, vol. 4, pp. 215-219, 2014.

S. Yin and N. Rayess, “Characterization of polymer-metal foam hybrids for use in vibration dampening and isolation,” Procedia Materials Science, vol. 4, pp. 311-316, 2014.

S. Kishimoto, Q. Wang, Y. Tanaka, and Y. Kagawa, “Compressive mechanical properties of closed-cell aluminum foam-polymer composites,” Composites: Part B. vol. 64, pp. 43-49, 2014.

L. Zhenrong, L. Yuan, and T. Yanfeng, “Analysis and experimentation research of the static compressive mechanical test of foam aluminum composite,” Advanced Materials Research, vol. 1030-1032, pp. 16- 19, 2014.

K. Stobener and G. Rausch, “Aluminum foam-polymer composites: processing and characteristics,” Journal of Materials Science, vol. 44, pp. 1506-1511, 2009.

M. Wang, H. Geng, X. Ge, J. Li, and D. Kou, “Polymer/Metal interpenetrating phase composites prepared via γ-Ray initiated In-situ emulsion polymerization,” Polymer composites, vol. 30, pp. 1258-1264, 2009.

K. Angamnuaysiri and S. Asavavisithchai, “Mechanical properties of inter- penetrating phase composites using open-cell Al foams with natural rubber and polyethylene,” Journal of Minerals, Metallurgy and Materials, vol. 25, pp. 31-35, 2015.

N. Dukhan, N. Rayess, and J. Hadley, “Characterization of aluminum foampolypropylene interpenetrating phase composites: Flexural test results,” Mechanics of Materials, vol. 42, pp. 134-141, 2010.

T. Doktor, P. Zlamal, T. Fil, P. Koudelka, D. Kytyr, and O. Jirousek, “Properties of polymer-filled aluminum foams under moderate strain-rate loading conditions,” Journal of Materials Science and Technology, vol. 49, pp. 597-600, 2015.

Y. Su, Z. Li, X. Gong, Q. Quyang, Q. Guo, C. Guo, J. Zhang, and D. Zhang, “Structural modeling and mechanical behavior of Metalporous-polymer composites (MPPCs) with different polymer fractions,” Composite Structures, vol. 153, pp. 673-681, 2016.

L. Yu and G. Xiao-lu, “Compressive behavior and energy absorption of metal porous polymer composite with inter-penetrating network structure,” Transactions of Nonferrous Metals Society of China, vol. 16, pp. 439-443, 2006.

X. L. Gong, Y. Liu, and J. Lu, “Manufacturing and low-velocity impact response of a new composite material: Metal porous polymer composite (MPPC),” Journal of Materials Science, vol. 20, pp. 65-68, 2004.

J. Yuan, X. Chen, W. Zhou, and Y. Li, “Study on quasi-static compressive properties of aluminum foam-epoxy resin composite structures,” Composites Part B, vol. 79, pp. 301-310, 2015.

H. F. Cheng and F. S. Han, “Compressive behavior and energy absorbing characteristic of open cell aluminum foam filled with silicate rubber,” Scripta Materialia, vol. 49, pp. 583- 586, 2003.

J. L. Yu, J. R. Li, and S. S. Hu, “Strain-rate effect and micro-structural optimization of cellular metals,” Mechanics of Materials, vol. 38, pp. 160-170, 2006.

C. Perisamy, R. Jhaver, and H. V. Tippur, “Quasi-static and dynamic compression response of a lightweight interpenetrating phase composite foam,” Materials Science and Engineering: A, vol. 527, pp. 2845-2856, 2010.

M. Vesenjak, L. Krstulovic-Opera, Z. Ren, A. Ochsner, and Z. Domazet, “Experimental study of open-cell cellular structure with elastic filler material,” Experimental Mechanics, vol. 49, pp. 501-509, 2009.

S. Kishimoto, T. Shimizu, F. Yin, K. Naito, and Y. Tanaka, “Mechanical properties of metallic closed cellular materials containing polymer fabricated by polymer penetration,” Materials Science Forum, vol. 654-656, pp. 2628-2631, 2010.

D. L. Burris and W. G. Sawyer, “Hierarchically constructed metal foam/ polymer composite for higher thermal conductivity,” Wear, vol. 264, pp. 374-380, 2008.

J. Banhart, “Metal foams-from fundamental research to applications,” in Frontiers in the Design of Materials, B. Raj, S. Ranganathan, K. B. S. Rao, M. D. Matthew, and P. Shankar, Eds., Universities Press (India) Ltd., 2007, pp. 279-289.

S. McKown and R. Mines, “Measurement of material properties for metal foam cored polymer composite sandwich construction,” Applied Mechanics and Materials, vol. 1-2, pp. 211-216, 2004.

K. Ji, Y. Xu, J. Zhang, J. Chen and Z. Dai, “Foamed-metal-reinforced composites: Tribological behavior of foamed copper filled with epoxy-matrix polymer,” Materials and Design, vol. 61, pp. 109-116, 2014.

ดาวน์โหลด

เผยแพร่แล้ว

2018-06-27

วิธีการอ้างอิง

[1]
A. Chaturvedi, “Recent developments in the field of metal foam-polymer hybrid materials: A brief overview”, J Met Mater Miner, ปี 28, ฉบับที่ 1, มิ.ย. 2018.

ฉบับ

ปีที่ 28 ฉบับที่ 1 (2018)

บท

บทความปริทรรศน์

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.