Enhancement of mechanical, thermal and antibacterial properties of sisal/PHBV biocomposite by fibre modification

Authors

  • Thorsak Kittikorn Faculty of Science, Prince of Songkla University
  • Raminatun Malakul Faculty of Science, Prince of Songkla University
  • Emma Stromberg Department of Fibre and Polymer Technology, Royal Institute of Technology
  • Monica Ek Department of Fibre and Polymer Technology, Royal Institute of Technology
  • Sigbritt Karlsson Department of Fibre and Polymer Technology, Royal Institute of Technology

Keywords:

Sisal, PHBV, Surface modification, Thermal properties, Antimicrobial

Abstract

Lignocellulosic biocomposite is a promising biodegradable materials, though improvement of the interfacial adhesion between cellulose fibre and polymer matrix is still challenged. Therefore, this work investigated the effect of propionylation of sisal reinforced fibre in the sisal/polyhydroxybutyrate-co-valerate (PHBV) biocomposite. Propionylation involved esterification substitution of propionic anhydride to hydroxyl group of sisal fibre, where ester group (COOR) of propionylated fibre was successfully observed by Fourier transform Infrared spectroscopy (FTIR). Then mechanical and thermal properties were evaluated and biodegradation characteristics were assessed. The tensile strength and modulus of propionylated sisal/PHBV biocomposite were greater than unmodified sisal/PHBV, which revealed better compatibility at the interface. In addition, propionate moieties of sisal fibre could induce crystalline formation of PHBV, as determined by an increase of crystalline phase. The higher decomposition temperature (Td) and activation energy (Ea) of 155 kJ·mol-1, determined by thermal gravimetric analyser (TGA), were strong confirmation of good thermal resistance of the propionylated sisal biocomposite. The storage modulus, as characterized by dynamic mechanical thermal analyser (DMTA), also revealed the improvement of stiffness. Bacterial growth tests evaluated the inhibition of bacterial growth on the PHBV biocomposites. It was clear that propionylation of sisal fibre decreased colonization of Staphylococcus aureus (SA) and Escherichia coli (E.coli).

Downloads

Download data is not yet available.

References

F. P. La Mantia and M. Morreale, “Green composites: A brief review,” Composites Part A: Applied Science and Manufacturing, vol. 42, pp. 579-588, 2011.

A. K. Mohanty, M. Misra, and L. T. Drzal, “Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world,” Journal of Polymers and the Environment, vol. 10, pp. 19-26, 2002.

R. A. J. Verlinden, D. J. Hill, M. A. Kenward, C. D. Williams, and I. Radecka, “Bacterial synthesis of biodegradable polyalkanoates,” Journal of Applied Microbiology, vol. 102, pp. 1437-1449, 2007.

Y. X. Weng, Y. Wang, X. L. Wang, and Y. Z. Wang, “Biodegradation behavior of PHBV films in a pilot scale composting condition,” Polymer Testing, vol. 29, pp. 579-587, 2010.

K. C. Batista, D. A. K. Silva, D. A. K. Silva, L. A. F. Coelho, and S. H. Pezzin, “ Soil biodegradation of PHBV/peach palm particles biocomposites,” Journal of Polymers and the Environment, vol.18, pp. 346-354, 2010.

A. K. Bledzki and A. Jaszkiewicz, “Mechanical performance of biocomposites based on PLA and PHBV reinforced with natural fibres-a comparative study to PP,”Composites Science and Technology, vol.70, pp. 1687-1696, 2010.

O. Faruk, A. K. Bledzki, H. P. Fink, and M. Sain, “Biocomposites reinforced with natural fibres: 2000–2010,” Progress in Polymer Science, vol. 37, p p. 1552-1596, 2012.

T. Kittikorn, E. Strömberg, and S. Karlson, “The effect of surface modifications on the mechanical and thermal properties of empty fruit bunch oil palm fibre PP biocomposites,” Polymer from Renewable Resources, vol. 3, pp. 79-100, 2012.

T. Kittikorn, E. Strömberg, M. Ek, and S. Karlsson, “Comparison of water uptake as function of surface modification of empty fruit bunch oil palm fibres in PP Biocomposites,” BioResources, vol. 8, pp. 2998-3016, 2012.

H. P. S. Abdul Khalil, N. L. Suraya, N. Atiqah, M. Jawaid, and A. Hassan, “Mechanical and thermal properties of chemical treated kenaf fibres reinforced polyester composites,” Journal of Composite Materials, vol. 47, pp. 3343-3350, 2012.

L. Petersson, K. Oksman, and A.P. Mathew, “Using maleic anhydride grafted poly(lactic acid) as a compatibilizer in poly (lactic acid)/layered-silicate nanocomposites,” Journal of applied polymer science, vol. 102, pp. 1852-1862, 2006.

M. S. Sreekala and S. Thomas, “Effect of fibre surface modification on water-sorption characteristics of oil palm fibres,” Composites Science and Technology, vol. 63, pp. 861-869, 2003.

S. H. Lee and S. Wang, “Biodegradable polymers/bamboo fibre biocomposite with bio-based coupling agent,” Composites Part A: Applied Science and Manufacturing, vol. 37, pp. 80-91, 2006.

S. Wallström, E. Strömberg, and S. Karlsson, “Microbiological growth testing of polymeric materials: an evaluation of new methods,” Polymer Testing,vol. 24, pp. 557- 563,2005.

M. O. Samuelsson and D. Kirchman, “Degradation of adsorbed protein by attached bacteria in relationship to surface hydrophobicity,” Applied and Environmental Microbiology, vol. 56, pp. 3643-3648, 1990.

J. W. Rhim, H. M. Park, and C. S. Ha, “Bionanocomposites for food packaging applications,” Progress in Polymer Science, vol. 38, pp. 1629-1652, 2013.

N. M. Barkoula, S. K. Garkhail, and T. Peijs, “Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate,” Industrial Crops and Products, vol. 3, pp. 34-42, 2010.

S. O. Kulkarni, P. P. Kanekar, S. S. Nilegaongar, S. S. Sarnaik, and J. P. Jog, “Production and characterization of a biodegradable poly(hydroxybutyrate-cohydroxyvalerate) (PHB-co-PHV) copolymer by moderately haloalkalitolerant Halomonas campisalis MCM B-1027 isolated from Lonar Lake, India,” Bioresource Technology, vol. 101, pp. 9765-9761, 2010.

C. Moliner, J. D. Badia, B. Bosio, E. Aratoa, T. Kittikorn, E. Strömberg, R. Teruel-Juanes, M. Ek, S. Karlsson, and A. Ribes-Greus, “Thermal and thermo-oxidative stability and kinetics of decomposition of PHBV/sisal composites,” Chemical Engineering Communications, vol. 205, pp.226-237, 2018.

Downloads

Published

2018-06-27

How to Cite

[1]
T. . Kittikorn, R. Malakul, E. Stromberg, M. Ek, and S. Karlsson, “Enhancement of mechanical, thermal and antibacterial properties of sisal/PHBV biocomposite by fibre modification”, J Met Mater Miner, vol. 28, no. 1, Jun. 2018.

Issue

Section

Original Research Articles