Heat treatment of steel parts in different media

ผู้แต่ง

  • Suresh C. Maidargi Department of Chemical Engineering, Dayananda Sagar Institutions, Shavige Malleshwara Hills, Kumaraswamy Layout, Bangalore - 560 078, Karnataka
  • Veena Rani Department of Chemical Engineering, Dayananda Sagar Institutions, Shavige Malleshwara Hills, Kumaraswamy Layout, Bangalore - 560 078, Karnataka

คำสำคัญ:

Carburizing, Hardening, Quenching, Tempering, Metallography

บทคัดย่อ

This study reports an investigation of the effect of different media (oil and polymer) on the properties of different grade steel parts. Steel parts after manufacture, will not have the desired properties like wear resistance, tensile strength, surface and core hardness. To attain these, heat treatment processes like Case Hardening (CH) or Through Hardening (TH) were carried out in sealed quench furnace and rotary furnace. The microstructure of the steel part influences the hardness of the same. The required microstructure is Fine Tempered Martensite (FTM) and the Quench media has a very important role in achieving this. Using different grades of steels, the trials were carried out in SAVSOL Q OO1 oil and POLYQUENCH-GN polymer. Finally comparative trials were also carried out in order to determine the suitability of new quench media. Polymer quench was found to be better quench media in terms of time and energy savings to get the required microstructure – FTM, which gave the improved desired properties.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

Veena Rani, Department of Chemical Engineering, Dayananda Sagar Institutions, Shavige Malleshwara Hills, Kumaraswamy Layout, Bangalore - 560 078, Karnataka

Chemical engineerig

เอกสารอ้างอิง

Unterweiser, P.M. (1989). Heat Treater’s Guide : standards practices and procedures for steel. 5th edition. Metals Park, Ohio : American Society for Metals.

Krauss, G. (1990). Steels : Heat Treatment and Processing Principles. in ASM International. Materials Park : Ohio.

Collin, R., Gunnarson, S. and Thulin, D. (1972). Mathematical Model For Predicting Carbon Concentration Profiles Of Gas-Carburized Steel. J. Iron Steel. 210(10) : 785-789.

Naito, T. (2002). Gas carburizing and material strengthening methods. Practical carburizing technology. 2nd edition.

Tool and Manufacturing Engineers Handbook. (1985). Society of Manufacturing Engineers. 4th edition. 10-25.

Quenchants-Monitoring and Maintenance. (2011). Fuchs Technical Information. 912 edition. 7-12.

ดาวน์โหลด

เผยแพร่แล้ว

2013-12-31

วิธีการอ้างอิง

[1]
S. C. Maidargi และ V. . Rani, “Heat treatment of steel parts in different media”, J Met Mater Miner, ปี 23, ฉบับที่ 2, ธ.ค. 2013.

ฉบับ

ปีที่ 23 ฉบับที่ 2 (2013)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2013 วารสารโลหะ, วัสดุ และแร่

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.