Phase separation dynamics and morphologies prediction of PEO-<i>b</i>-PMMA copolymer by atomistic and mesoscopic simulations
คำสำคัญ:
Morphologies, Phase separation, Block copolymers, Free Energy Density, Order Parameterบทคัดย่อ
Atomistic and mesoscopic simulations are the most important tools to predict the morphologies of block copolymers. In this study, inter-bead interactions and essential parameters for meso-structure polymeric models were optimized for poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA; O-b-M) binary systems. A coarse-grained model in a mesoscopic dynamic was used to represent polymeric chain. Gaussian chain is calculated from polymer chain length concerning its characteristic properties. Free energy density was considered by setting suitable time steps and inter-bead interactions for meso-structure simulations. The interaction energies of 1:1, 2:1 and 4:1 molar ratio of O to M segments were 3.67, 4.66, and 5.92, respectively. These values are obtained from Flory-Huggins parameters in atomistic simulations. Morphology at equilibrium was obtained in five different types: worm-like micelle, defected lamellar, lamellar, spherical micelle and bicontinuous at 400 K from M5-1M2-O5, O4-O4M6, M4-M5O5, O10-2M122-O10 and M11-1M2-O10, respectively. The obtained morphologies correlate with order parameter developed from the simulations.Downloads
เอกสารอ้างอิง
M. Lazzari and M. A. López-Quintela, "Block copolymers as a tool for nanomaterial fabrication," Advanced Materials, vol. 15, pp. 1583-1594, 2003.
C. Schatz and S. Lecommandoux, "Polysaccharide-containing block copolymers: synthesis, properties and applications of an emerging family of glycoconjugates," Macromolecular Rapid Communications, vol. 31, pp. 1664-1684, 2010.
K. Yang and C. D. Han, "Effects of shear flow and annealing on the morphology of rapidly precipitated immiscible blends of polystyrene and polyisoprene," Polymer, vol. 37, pp. 5795-5805, 1996.
P. Bhargava, Y. Tu, J. X. Zheng, H. Xiong, R.P. Quirk and S. Z. D. Cheng, "Temperature-induced reversible morphological changes of polystyrene-block-poly(ethylene oxide) micelles in solution," Journal of the American Chemical Society, vol. 129, pp. 1113-1121, 2007.
I. Barandiaran, D. Katsigiannopoulos, E. Grana, A. Avgeropoulos, A. Eceiza and G. Kortaberria, "PI-b-PMMA diblock copolymers: nanostructure development in thin films and nanostructuring of thermosetting epoxy systems," Colloid and Polymer Science, vol. 291, pp. 2173-2180, 2013.
M. Park, C. Harrison, P. M. Chaikin, R. A. Register and D. H. Adamson, "Block copolymer lithography: periodic arrays of ~1011 holes in 1 square centimeter," Science, vol. 276, pp. 1401-1404, 1997.
T. Thurn-Albrecht, R. Steiner, J. DeRouchey, C. M. Stafford, E. Huang, M. Bal, M. Tuominen, C. J. Hawker and T. P. Russell, "Nanoscopic templates from oriented block copolymer films," Advanced Materials, vol. 12, pp. 787-791, 2000.
T. Thurn-Albrecht, J. Schotter, G. A. Kästle, N. Emley, T. Shibauchi, L. Krusin-Elbaum, K. Guarini, C. T. Black, M. T. Tuominen and T. P. Russell, "Ultrahigh-density nanowire arrays grown in self-assembled diblock copolymer templates," Science, vol. 290, pp. 2126-2129, 2000.
J. H. Park, K. D. Park and Y. H. Bae, "PDMS-based polyurethanes with MPEG grafts: synthesis, characterization and platelet adhesion study," Biomaterials, vol. 20, pp. 943-953, 1999.
K. Bergström, K. Holmberg, A. Safranj, A. S. Hoffman, M. J. Edgell, A. Kozlowski, B. A. Hovanes and J. M. Harris, "Reduction of fibrinogen adsorption on PEG-coated polystyrene surfaces," Journal of Biomedical Materials Research, vol. 26, pp. 779-790, 1992.
S. Nagaoka and A. Nakao, "Clinical application of antithrombogenic hydrogel with long poly(ethylene oxide) chains," Biomaterials, vol. 11, pp. 119-121, 1990.
F. B. Bailey and J. V. Koleske, Poly(ethylene oxide). New York: Academic Press, 1976.
H. -C. Chi, C. -S. Chern, C. -K. Lee and H. - F. Chang, "Synthesis and characterization of amphiphilic poly(ethylene glycol) graft copolymers and their potential application as drug carriers," Polymer, vol. 39, pp. 1609- 1616, 1998.
S. Schantz, "Structure and mobility in poly(ethylene oxide)/poly(methyl methacrylate) blends investigated by 13C solid-state NMR," Macromolecules, vol. 30, pp. 1419-1425, 1997.
J. A. Zawada, C. M. Ylitalo, G. G. Fuller, R. H. Colby and T. E. Long, "Component relaxation dynamics in a miscible polymer blend: poly(ethylene oxide)/poly(methyl methacrylate)," Macromolecules, vol. 25, pp. 2896-2902, 1992.
S. S. Jawalkar, S. G. Adoor, M. Sairam, M. N. Nadagouda and T. M. Aminabhavi, "Molecular modeling on the binary blend compatibility of poly(vinyl alcohol) and poly(methyl methacrylate): an atomistic simulation and thermodynamic approach," Journal of Physical Chemistry B, vol. 109, pp. 15611-15620, 2005.
D. Mu, J. -Q. Li and Y. -H. Zhou, "Modeling and analysis of the compatibility of polystyrene/poly(methyl methacrylate) blends with four inducing effects," Journal of Molecular Modeling, vol. 17, pp. 607-619, 2011.
M. Studio, Accelrys Software Inc. 2011.
S. S. Jawalkar, S. K. Nataraj, A. V. Raghu and T. M. Aminabhavi, "Molecular dynamics simulations on the blends of poly(vinyl pyrrolidone) and poly(bisphenol-A-ether sulfone)," Journal of Applied Polymer Science, vol. 108, pp. 3572-3576, 2008.
D. Mu, X. -H. Huang, Z. -Y. Lu and C. Sun, "Computer simulation study on the compatibility of poly(ethylene oxide)/ poly(methyl methacrylate) blends ," Chemical Physics, vol. 348, pp. 122-129, 2008.
Y. Murakami, "Studies on compatibility of poly(ethylene oxide) and poly(methyl methacrylate) by inverse gas chromatography," Polymer Journal, vol. 220, pp. 549-556, 1988.
J. E. Mark, Polymer data handbook. New York: Oxford University Press, Inc., 1999.
E. Calahorra, M. Cortazar and G. M. Guzmán, "Thermal decomposition of poly(ethylene oxide), poly(methyl methacrylate), and their mixtures by thermogravimetric method," Journal of Polymer Science: Polymer Letters Edition, vol. 23, pp. 257- 260, 1985.
J. G. E. M. Fraaije, B. A. C. van Vimmeren, N. M. Maurits, M. Postma, O. A. Evers, C. Hoffmann, P. Altevogt and G. GoldbeckWood, "The dynamic mean-field density functional method and its application to the mesoscopic dynamics of quenched block copolymer melts," Journal of Chemical Physics, vol. 106, pp. 4260-4269, 1997.
P. Altevogt, O. A. Evers, J. G. E M. Fraaije, N. M. Maurits and B. A. C. van Vlimmeren, "The MesoDyn project: software for mesoscale chemical engineering," Journal of Molecular Structure: THEOCHEM, vol. 463, pp. 139-143, 1999.
S. S. Jawalkar and T. M. Aminabhavi, "Molecular modeling simulations and thermodynamic approaches to investigate compatibility/incompatibility of poly(llactide) and poly(vinyl alcohol) blends," Polymer, vol. 47, pp. 8061-8071, 2006.
A. C. Fernandes, J. W. Barlow and D. R. Paul, "Blends containing polymers of epichlorohydrin and ethylene oxide. Part I: Polymethacrylates," Journal of Applied Polymer Science, vol. 32, pp. 5481-5508, 1986.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2018 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
