Characterization and photocatalytic activity of titanium dioxide deposited on stainless steel by pulsed-pressure MOCVD
คำสำคัญ:
Titanium dioxide, Pulsed-pressure metalorganic chemical vapor deposition, Photocatalysis, Stainless steele, Contact angleบทคัดย่อ
Titanium dioxide (TiO2) was deposited on stainless steel 304 by pulsed-pressure metalorganic chemical vapor deposition (PP-MOCVD). Titanium tetraisopropoxide (TTIP) in toluene at the concentration of 0.5 mol% was used as the precursor. The deposition was conducted at the base pressure of 300 Pa and deposition temperatures were varied between 350°C and 400°C. At these deposition temperatures, anatase phase is expected for further photocatalysis study. The deposited TiO2 thin films at the thickness of hundreds nanometers were analyzed using field emission scanning electron microscopy (FESEM) for surface morphology. X-ray diffraction (XRD) was applied for phase analysis. The contact angle was measured to study its relationship with surface morphology, grain size and phase. Finally, photocatalytic activity was investigated through the absorption of methylene blue using UV/Vis spectrophotometer. The deposited TiO2 thin films were found to be rutile and anatase with various surface morphology and grain size depends on the deposition temperature. The hydrophobicity of depositedTiO2 thin films tend to increase with the deposition temperature whereas the photocatalytic property depends on the microstructure of TiO2 thin film.Downloads
เอกสารอ้างอิง
M. N. Chong, B. Jin, C. W. K. Chow and C. Saint, “Recent developments in photocatalytic water treatment technology: A review,” Water research, vol. 44, pp. 2997-3027, 2010.
H. Zhang, X. Quan, S. Chen, H. Zhao and Y. Zhao, “Fabrication of photocatalytic membrane and evaluation its efficiency in removal of organic pollutants from water,” Separation and Purification Technology, vol. 50, pp. 147-155, 2006.
U. I. Gaya and A. H. Abdullah, “Heterogeneous photocatalytic degradation of organic contaminants over titanium dioxide: A review of fundamentals, progress and problems,” Journal of Photochemistry and Photobiology C: Photochemistry Reviews, vol. 9, pp. 1-12, 2008.
M. Pakmehr, A. Nourmohammadi, M. Ghashang and A. Saffar-Teluri, “Synthesis, structural characterization and catalytic activity of TiO2/Al2O3 photo-composite,” Journal of Particle Science &Technology, vol. 1, pp. 31-38, 2015.
S. K. Zheng, T. M. Wang, G. Xiang and C. Wang, “Photocatalytic activity of nanostructured TiO2 thin films prepared by dc magnetron sputtering method,” Vacuum, vol. 62, pp. 361-366, 2001.
T. Luttrell, S. Halpegamage, J. Tao, A. Kramer, E. Sutter and M. Batzill, “Why is anatase a better photocatalyst than rutile? – Model studies on epitaxial TiO2 films,” Scientific Reports, vol. 4, pp.4043-4050, 2014.
Z. Zhang, F. Wu, H. J. W. Zandvliet, B. Poelsema, H. Metiu and M. G. Lagally, “Energetics and dynamics of Si Ad-Dimers on Si(001),” Physical Review Letters, vol. 74, pp. 3644-3647, 1995.
D. Dijkkamp, E. J. van Loenen and H. B. Elswijk, Proc. 3rd NEC Symposium on Fundamental Approach to New Material Phases. Springer Series on Material Science, Springer-Verlag, Berlin, 1992.
L. Liu, H. Zhao, J. M. Andino and Y. Li, “Photocatalytic CO2 reduction with H2O on TiO2 nanocrystals: Comparison of anatase, rutile, and brookite polymorphs and exploration of surface chemistry,” ACS Catalysis, vol. 2, pp. 1817-1828, 2012.
Y. B. Ryu, M. S. Lee, E. D. Jeong, H. G. Kim, W. Y. Jung, S. H. Baek, G.-D. Lee, S. S. Park and S.-S. Hong, “Hydrothermal synthesis of titanium dioxide from peroxotitanate solution using different amine group-containing organics and their photocatalytic activity,” Catalysis Today, vol. 124, pp. 88-93, 2007.
J. Yu, J. C. Yu, B. Cheng and X. Zhao, “Preparation and characterization of highly photoactive nanocrystalline TiO2 powders by solvent evaporation induced crystallization method,” Science in China Series B: Chemistry, vol. 46, pp. 549-557, 2003.
V. Siriwongrungson, M. M. Alkaisi and S.P. Krumdieck, “Step coverage of thin titania films on patterned silicon substrate by pulsed-pressure MOCVD,” Surface and Coatings Technology, vol.201, pp. 8944- 8949, 2007.
S. Krumdieck, “Kinetic model of low pressure film deposition from single precursor vapor in a well-mixed, cold-wall reactor,” Acta Materrialia, vol. 49, pp. 583- 588, 2001.
S. Krumdieck and R. Raj, “Growth rate and morphology for ceramic films by pulsedMOCVD,” Surface and Coatings Technology, vol.141, pp. 7-14, 2001.
E. Martin, A. Lanzutti, M. Lekka, L. Guzman, W. Ensinger and L. Fedrizzi, “Chemical and mechanical characterization of TiO2/Al2O3 atomic layer depositions on AISI 316L stainless steel,” Surface and Coatings Technology, vol.211, pp. 84-88, 2012.
J. I. Langford and A. J. C. Wilson, “Scherrer after Sixty Years: A Survey and Some New Results in the Determination of Crystallite Size,” Journal of Applied Crystallography, vol.11, pp.102-113, 1978.
Z. A. C. Ramli, N. Asim, W. N. R. W. Isahak, Z. Emdadi, N. Ahmad-Ludin, M. A. Yarmo, and K. Sopian, “Photocatalytic Degradation of Methylene Blue under UV Light Irradiation on Prepared Carbonaceous TiO2,” The Scientific World Journal, vol. 2014, pp.1-8, 2014.
A. L. Greer, “Diffusion and reaction in thin films,” Applied Surface Science, vol. 86, pp.329-337, 1995.
M. Ohring, Materials Science of Thin Films 2nd Edition. Academic Press, United States of America, 2002.
C. E. Morosanu, Thin films by chemical vapour deposition. Elsevier, 1990.
F.-D. Duminica, F. Maury and R. Hausbrand, “Growth of TiO2 thin films by AP-MOCVD on stainless steel substrate for photocatalytic applications,” Surface and Coatings Technology, vol. 201, pp. 9304-9308, 2007.
K.-R. Wu, J.-J. Wang, W.-C. Liu, Z.-S. Chen and J.-K. Wu, “Deposition of graded TiO2 films featured both hydrophobic and photoinduced hydrophilic properties,” Applied Surface Science, vol. 252, pp. 5829-5838, 2006.
T. Ohno, K. Sarukawa, K. Tokieda and M. Matsumura, “Morphology of a TiO2 photocatalyst (Degussa, P-25) consisting of anatase and rutile crystalline phases,” Journal of Catalysis, vol. 203, pp.82-86, 2001.
D. O. Scanlon, C. W. Dunnill, J. Buckeridge, S. A. Shevlin, A. J. Logsdali, S. M. Woodley, C. R. A. Catlow, M. J. Powell, R. G. Palgrave, I. P. Parkin, G. W. Watson, T. W. Keal, P. Sherwood, A. Walsh and A. A. Sokol, “Band alignment of rutile and anatase TiO2,” Nature Materials, vol. 12, pp. 798- 801, 2013.
J. Singh, S. A. Khan, J. Shah, R. K. Kotnala and S. Mohapatra, “Nanostructured TiO2 thin films prepared by RF magnetron sputtering for photocatalytic applications,” Applied Surface Science, vol. 422, pp. 953-961, 2017.
S. P. Krumdieck and R. Raj, “Experimental Characterization and Modeling of Pulsed MOCVD with Ultrasonic Atomization of Liquid Precursor,” Chemical Vapor Deposition, vol. 7, pp.85-90, 2001.
J. Pan, G. Liu, G.Q. Lu and H.-M. Cheng, “On the true photoreactivity order of {001}, {010}, and {101} facets of anatase TiO2 crystals,” Angewandte Chemie Internal Edition, vol. 50, pp. 2133-2137, 2011.
J. N. Wilson and H. Idriss, “Effect of surface reconstruction of TiO2(001) single crystal on the photoreaction of acetic acid,” Journal of Catalysis, vol. 214, pp. 46-52, 2003.
J. N. Wilson and H. Idriss, “Structure sensitivity and photocatalytic reactions of semiconductors. Effect of the last year atomic arrangement,” Journal of the American Chemical Society, vol. 124, pp. 11284- 11285, 2002.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2018 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
