Comparison of ZnO film prepared by spray pyrolysis and screen printing methods
คำสำคัญ:
Zinc oxide, Spray pyrolysis technique, Screen printing techniqueบทคัดย่อ
Zinc oxide (ZnO) thin films were prepared and compared between spray pyrolysis and screen-printing techniques. The obtained thin films from both methods were annealed at 400, 450, 500 and 550°C in the air for 30 min, then characterized by x-ray diffraction, ultraviolet-visible spectroscopy and four-point probes techniques. Optical transmittance spectra of ZnO thin films prepared by spray pyrolysis methods and screen printing methods were transmitted through thin film in the range from 300 nm to 800 nm. The lowest of sheet resistance of thin films from both techniques were found to develop at the same annealing temperature of 400°C with the values of 90.64 W·square-1 and 104.80 W·square-1 for spray pyrolysis method and screen printing method, respectively.Downloads
เอกสารอ้างอิง
X. H. Wang, B. Yao, Z. P. Wei, D. Z. Sheng, Z. Z. Zhang, B. H. Li, Y. M. Lu, D. X. Zhao, J. Y. Zhang, and X. W. Fan, “Acceptor formation mechanisms determination from electrical and optical properties of p-type ZnO doped with lithium and nitrogen,” Journal of Physics D: Applied Physics, vol. 39, pp. 4568–4571, 2006.
M. T. Goodarzi and H. Eshghi, “Fabrication and characterization of CuO/ZnO:Al photodiode prepared by spray pyrolysis method,” Materials Letters, vol. 215, pp. 79-82, 2018.
N. A. Suvorova, I. O. Usov, L. Stan, R. F. De Paula, A. M. Dattelbaum, Q. X. Jia, and A. A. Suvorova, “Structural and optical properties of ZnO thin films by rf magnetron sputtering with rapid thermal,” Applied Physics Letters, vol. 92, pp. 1-3, 2008.
S. Morouf, A. Beniaiche, K. Kardarian, M. J. Mendes, O. S. Sobrado, H. Aguas, E. Fortunato, and R. Martins, “Low-temperature spray-coating of high-performing ZnO:Al films for transparent electronics,” Journal of Analytical and Applied Pyrolysis, vol. 217, pp. 299-308, 2017.
V. Mata, A. Maldonado, and M. Luz Olvera, “Deposition of ZnO thin films by ultrasonic spray pyrolysis technique. Effect of the milling speed and time and its application in photocatalysis,” Materials Science in Semiconductor Processing, vol. 75, pp. 288- 295, 2018.
R. A. Zargar, S. Chackrabarti, S. Joseph, M. S. Khan, R. Husain, and A. K. Hafiz, “Synthesis and characterization of screen printed ZnO films for solar cell,” Optik - International Journal for Light and Electron Optics, vol. 126, pp. 4171-4174, 2015.
P. Mitra, A. P. Chatterjee, and H. S. Maiti, “ZnO thin film sensor,” Materials Letters, vol. 35, pp. 33–38, 1998.
K. Rekha, M. Nirmala, M. G. Nair, and A. Anukaliani, “Structural, optical, photocatalytic and antibacterial activity of zinc oxide and manganese doped zinc oxide nanoparticles,” Physica B, vol. 405, pp. 3180-3185, 2010.
H. Kim, A. Piqué, J. S. Horwitz, H. Murata, Z. H. Kafafi, C. M. Gilmore, and D. B. Chrisey, “Effect of aluminum doping on zinc oxide thin films grown by pulsed laser deposition for organic light-emitting devices,” Thin Solid Films, vol. 377, pp. 798-802, 2000.
A. Bedia, F. Z. Bedia, M. Aillerie, N. Maloufi and B. Benyoucef, “Morphological and Optical properties of ZnO thin films prepared by spray pyrolysis on glass substrates at various temperatures for integration in solar cell,” Energy Procedia, vol. 74, pp. 529-538, 2015.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
