Bismuth vanadate (BiVO<sub>4</sub>) powder prepared by the sol-gel method
บทคัดย่อ
Bismuth vanadate (BiVO4) powder was prepared by the sol-gel method. Bismuth nitrate and ammonium vanadate were used as the starting precursors with mole ratio of 1:1 in ethanol at 70°C for 1 hour. The obtained sol was changed to the yellow gel after addition of deionized water and acetic acid. The yellow gel was dried at 100°C for 48 h and calcined at 400-600°C for 2 hours. The phase of BiVO4 powder was studied by X-ray diffraction (XRD). The morphology of BiVO4 powder was investigated by scanning electron microscopy (SEM). The element composition of BiVO4 powder was indicated by energy dispersive X-ray spectrometry (EDS).Downloads
Download data is not yet available.
ดาวน์โหลด
เผยแพร่แล้ว
2012-12-20
วิธีการอ้างอิง
[1]
P. Pookmanee, S. Kojinok, และ S. Phanichphant, “Bismuth vanadate (BiVO<sub>4</sub>) powder prepared by the sol-gel method”, J Met Mater Miner, ปี 22, ฉบับที่ 2, ธ.ค. 2012.
ฉบับ
บท
Original Research Articles
การอนุญาต
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
