Corrosion of ECAPed Magnesium alloys and its background: A review

ผู้แต่ง

  • Gajanan Manjunath Naik Department of Mechanical Engineering, NITK
  • Narendranath Sannayellappa Department of Mechanical Engineering, NITK
  • Selvanayagam Selvin Satheesh Kumar Defence Metallurgical Research Laboratory, Kanchanbagh

คำสำคัญ:

Corrosion, ECAP, Magnesium, Polarization, UFG

บทคัดย่อ

The aim of this review article is to provide a brief mechanistic overview of magnesium alloys, equal channel angular pressing and corrosion behavior of un-ECAPed and ECAPed Mg alloys. The considerate of the corrosion processes of ECAPed Mg alloys builds upon interpretation of the corrosion of fine-grain magnesium alloys. This provides an understanding of the effect of grain size on corrosion of Mg alloys. This deep understanding is essential as a foundation if we are to produce corrosion-resistant magnesium alloys. Considerable has previously been accomplished, but there is enormous scope for development. This present concise review can provide a foundation for further, much desirable research.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Zhongyu Cui, Xiaogang Li, Kui Xiao, Chaofang Dong, "Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment," Corrosion Science, vol. 76, pp. 243–256, 2013.

E.A. Noor, A.H. Al-moubaraki, "Corrosion Behavior of Mild Steel in Hydrochloric Acid Solutions," Int. J. Electrochem. Sci., vol.3, pp. 806–818,2008.

Hao-Miao Yang, Nan-Yi Zhang, Na Liu, WeiDong Xie, Xiao-Dong Peng, "Microstructure, mechanical properties, and corrosion resistance of Mg–9Li–3Al–1.6Y alloy," Rare Metals, vol. 35, pp.374-379, 2016.

Avvari, Muralidhar, and S. Narendranath. "Effect of secondary Mg 17 Al 12 phase on AZ80 alloy processed by equal channel angular pressing (ECAP)," Silicon, vol. 10, pp. 39-47, 2018.

Muralidhar Avvari, S. Narendranath and H. Shivananda Nayaka, "A review on wrought magnesium alloys processed by equal channel angular pressing," Int. J. of. Materials and Product Technology, vol. 51, pp. 139-164, 2015.

Kumar, D. Sameer, C. Tara Sasanka, K. Ravindra, and K. N. S. Suman. "Magnesium and its alloys in automotive applications–a review," American Journal of Materials Science and Technology, vol.4, pp.12-30, 2015.

Ghali, Edward, Wolfgang Dietzel, and KarlUlrich Kainer. "General and localized corrosion of magnesium alloys: a critical review," Journal of materials engineering and performance, vol.13,pp.7-23, 2004.

M.H. Shaeri, M. Shaeri, M. Ebrahimi, M.T. Salehi, S.H. Seyyedein, "Progress in Natural Science : Materials International Effect of ECAP temperature on microstructure and mechanical properties of Al – Zn – Mg – Cu alloy," Prog. Nat. Sci. Mater. Int., Vol. 26 pp. 182–191,2016.

S. Zhu, Z. Liu, R. Qu, L. Wang, Q. Li, S. Guan, "Effect of rare earth and Mn elements on the corrosion behavior of extruded AZ61 system in 3 . 5 wt % NaCl solution and salt spray test," Journal of Magnesium and Alloy, vol.1, pp.249–255, 2013.

Shaw, Barbara A. "Corrosion resistance of magnesium alloys," ASM handbook, vol.13, pp. 692-696, 2003.

J.G. Brunner, J. May, H.W. Höppel, M. Göken, S. Virtanen, " Localized corrosion of ultrafinegrained Al – Mg model alloys," Electrochimica Acta, vol. 55, pp. 1966–1970, 2010.

G. Ben-hamu, D. Eliezer, D. Eliezer, "Corrosion behavior of wrought Mg – 6 % Zn – 1 % Mn – XSi – YCa alloy Corrosion behavior of wrought Mg – 6 % Zn – 1 % Mn – XSi – YCa alloy," Materials and Corrosion, vol. 64, pp.516-521, 2013.

Valiev, R. Z., & Langdon, T. G. "Principles of equal-channel angular pressing as a processing tool for grain refinement." Progress in materials science, vol.51, pp.881-981, (2006).

S. Rossi, P.L. Bonora, R. Pasinetti, L. Benedetti, M. Draghetti, E. Sacco, "Laboratory and Field Characterization of a New Sacrificial Anode for Cathodic Protection of Offshore Structures, " Corrosion, vol. 54, pp. 1018–1025, 1998.

M. Wang, B.Y. Zong, G. Wang, "Grain growth in AZ31 Mg alloy during recrystallization at different temperatures by phase field simulation," Computational Materials Science, vol.45, pp. 217– 222, 2009.

G. Qiang, C. Zanella, Y. Zhentao, "Ultra-Fine Grained Degradable Magnesium for Biomedical Applications," Rare Metal Materials and. Engineering, vol. 43, pp. 2561–2566, 2014.

F. Djavanroodi, M. Ebrahimi, "Effect of die parameters and material properties in ECAP with parallel channels," Materials Science and Engineering: A, vol. 527, pp.7593-7599, (2010).

X. Zhang, K. Zhang, X. Li, C. Wang, H. Li, C. Wang, X. Deng, "Corrosion and electrochemical behavior of as-cast Mg-5Y-7Gd-1Nd-0.5Zr magnesium alloys in 5 % NaCl aqueous solution," Progress in Natural Science: Materials International, vol. 21, pp. 314–321, 2011.

Jianghua Shen, Viera Gärtnerová, Laszlo J. Kecskes, Katsuyoshi Kondoh,Aleš Jäger, Qiuming Wei , "Residual stress and its effect on the mechanical properties of Y-doped Mg alloy fabricated via back-pressure assisted equal channel angular pressing (ECAP-BP)," Materials Science & Engineering A.vol. 669, pp.110–117, 2016.

D. Song, A. Ma, J. Jiang, P. Lin, D. Yang, J. Fan, "Corrosion behavior of equal-channelangular-pressed pure magnesium in NaCl aqueous solution," Corrosion Science, vol. 52, pp. 481–490, 2010.

T. Kakiuchi, Y. Uematsu, Y. Hatano, M. Nakajima, "Effect of hydrogen on fatigue crack propagation behavior of wrought magnesium alloy AZ61 in NaCl solution under controlled cathodic potentials," Engineering Fracture Mechanics, vol. 137, pp. 88–96, 2015

A. Pardo, M.C. Merino, A.E. Coy, R. Arrabal, F. Viejo, E. Matykina, "Corrosion behaviour of magnesium / aluminium alloys," Corrosion Science, vol. 50, pp. 823–834, 2008.

Kang, Feng, Jin Qiang Liu, Jing Tao Wang, and Xiang Zhao. "Equal channel angular pressing of a Mg–3Al–1Zn alloy with back pressure," Advanced Engineering Materials, vol. 12, pp. 730-734, 2010.

Birbilis, N., K. D. Ralston, S. Virtanen, H. L. Fraser, and C. H. J. Davies. "Grain character influences on corrosion of ECAPed pure magnesium," Corrosion Engineering, Science and Technology, vol. 45, pp. 224-230, 2010.

D. Rossouw, B. Langelier, A. Scullion, M. Danaie, G.A. Botton, "Multivariate-aided mapping of rare-earth partitioning in a wrought magnesium alloy," Scripta Materialia, vol. 124, pp. 174–178, 2016.

G.R. Argade, S.K. Panigrahi, R.S. Mishra, "Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium," Corrosion Science, vol. 58, pp. 145–151, 2012.

B.S. Padekar, R.K.S. Raman, V.S. Raja, L. Paul, "Stress corrosion cracking of a recent rare-earth containing magnesium alloy , EV31A , and a common Al-containing alloy, AZ91E," Corrosion Science, vol. 71, pp.1–9, 2013.

D. Eliezer, K.S. Shin, D. Eliezer, K.S. Shin, "Influence of Si , Ca and Ag addition on corrosion behaviour of new wrought Mg – Zn alloys," Materials science and technology, vol. 22, pp. 1213-1218, 2006.

Alvarez-Lopez, M., Pereda, M. D., Del Valle, J. A., Fernandez-Lorenzo, M., Garcia-Alonso, M. C., Ruano, O. A., & Escudero, M. L, “Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids,” Acta biomaterialia, vol. 6, pp. 1763–1771, 2010.

Ma, Yan Long, Fu Sheng Pan, Ru Lin Zuo, Jin Zhang, and Ming Bo Yang. "The influence of zinc and zirconium on the microstructure of the as-cast magnesium alloy ZK60," In Materials science forum, vol. 546, pp. 369-372, 2007.

A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, A. Yanagida, "Manufacturing Technology Severe plastic deformation (SPD) processes for metals," CIRP Annals, vol. 57, pp. 716–735, 2008.

J. Bin, Y.I.N. Heng-mei, L.I. Rui-hong, G.A.O. Liang, "Grain refinement and plastic formability of Mg-14Li-1Al alloy," Transactions of Nonferrous Metals Society of China, vol. 20, pp.503–507, 2010.

J. Zrnik, S. V Dobatkin, "Processing of Metals By Severe Plastic Deformation (SPD) – Structure And Mechanical Properties Respond," Metalurgija, vol. 47, pp. 211–216, 2008.

Gu, X. N., Li, S. S., Li, X. M., & Fan, Y. B, "Magnesium based degradable biomaterials: A review". Frontiers of Materials Science, vol. 8,pp. 200-218, 2014.

Furukawa, M., Horita, Z., Nemoto, M., & Langdon, T. G. "Processing of metals by equalchannel angular pressing." Journal of materials science, vol.36, pp.2835-2843, 2001.

E. Aghion, B. Bronfin, "Magnesium Alloys Development towards the 21st Century," Material Science Forum, vol.19, pp.350–351, (2000).

Y. Wang, H. Choo, "Influence of texture on Hall – Petch relationships in an Mg alloy," Acta Materialia, vol. 81, pp. 83–97, 2014.

M. Avvari, S. Narendranath, "Influence of Route-R on wrought magnesium AZ61 alloy mechanical properties through equal channel angular pressing," Journal of Magnesium and Alloy, vol. 2, pp.159–164, 2014.

Ben-Hamu, G., Eliezer, D., Kaya, A., Na, Y. G., & Shin, K. S. "Microstructure and corrosion behavior of Mg–Zn–Ag alloys." Materials Science and Engineering: A, vol.435, pp.579- 587, (2006).

Zhu, Y. T., & Lowe, T. C.. "Observations and issues on mechanisms of grain refinement during ECAP process." Materials Science and Engineering: A, vol. 291, pp. 46-53, (2000).

Tan, Qiyang, Andrej Atrens, Ning Mo, and Ming-Xing Zhang. "Oxidation of magnesium alloys at elevated temperatures in air: A review," Corrosion science, Vol. 112, pp.734- 759, 2016.

L. Bao, Z. Zhang, Q. Le, S. Zhang, J. Cui, "Corrosion behavior and mechanism of Mg-YZn-Zr alloys with various Y / Zn mole ratios," Journal of Alloys and Compounds, vol. 712, pp. 15–23, 2017.

H.S. Kim, W.J. Kim,"Enhanced corrosion resistance of ultrafine-grained AZ61 alloy containing very fine particles of Mg17Al12 phase," Corrosion Science, vol. 75, pp. 228– 238, 2013.

V.S. Raja, B.S. Padekar, "Role of chlorides on pitting and hydrogen embrittlement of Mg – Mn wrought alloy," Corrosion Science, vol.75, pp. 176–183, 2013.

Yim, Chang Dong, Young Min Kim, and Bong Sun You. "Effect of Ca addition on the corrosion resistance of gravity cast AZ31 magnesium alloy," Materials transactions, vol. 48, pp.1023-1028, 2007.

Minárik, P., R. Král, and B. Hadzima. "Substantially higher corrosion resistance in AE42 magnesium alloy through corrosion layer stabilization by ECAP treatment," Acta Physica Polonica-Series A General Physics, vol.122, pp. 614-617, 2012.

B. Hadzima, M. Janecek, P. Suchy, J. Muller, and L. Wagner, “Microstructure and corrosion properties of fine-grained mg-based alloys,” Materials Science Forum, vol. 584, pp. 994– 999, 2008.

Turowska, A. and Adamiec, J., "Mechanical Properties of WE43 Magnesium Alloy Joint at Elevated Temperature," Archives of Metallurgy and Materials, vol. 60, pp.2695-2702, 2015.

I.B. Singh, M. Singh, S. Das, "A comparative corrosion behavior of Mg , AZ31 and AZ91 alloys in 3 . 5 % NaCl solution," Journal of Magnesium and Alloy, vol. 3, pp. 142–148, 2015.

Makar, G. L., & Kruger, J. "Corrosion of magnesium, " International materials reviews, vol. 38, pp.138-153, 1993.

K.W. Guo, "A Review of Magnesium / Magnesium Alloys Corrosion and its Protection," Recent Patents on Corrosion Science, vol.1, pp.13–21, 2010.

Raman, RK Singh. "The role of microstructure in localized corrosion of magnesium alloys." Metallurgical and Materials Transactions A, vol. 35, pp. 2525-2531, 2004.

op't Hoog, Cot, N. Birbilis, and Y. Estrin. "Corrosion of pure Mg as a function of grain size and processing route." Advanced Engineering Materials, vol.10, pp. 579-582, 2008.

Gray, JEl, and Ben Luan. "Protective coatings on magnesium and its alloys—a critical review." Journal of alloys and compounds, vol. 336,pp.88-113, 2002.

A. Srinivasan, C. Blawert, Y. Huang, C.L. Mendis, K.U. Kainer, N. Hort, "Corrosion behavior of Mg-Gd-Zn based alloys in aqueous NaCl solution," Journal of Magnesium and Alloy. vol. 2, pp.245–256, 2014.

M. Esmaily, D.B. Blücher, J.E. Svensson, M. Halvarsson, L.G. Johansson, "New insights into the corrosion of magnesium alloys-The role of aluminum," Scripta Materialia, vol. 115, pp. 91–95, 2016.

M. Esmaily, M. Shahabi-navid, J. Svensson, M. Halvarsson, L. Nyborg, Y. Cao, L. Johansson, "Influence of temperature on the atmospheric corrosion of the Mg – Al alloy AM50," Corrosion Science, vol. 90, pp. 420– 433, 2015.

S. Pawar, T.J.A. Slater, T.L. Burnett, X. Zhou, G.M. Scamans, Z. Fan,G.E. Thompson, P.J. Withers, "Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet," Acta Materialia, vol. 133, pp.90-99, 2017.

Z. Shen, A. Ma, J. Jiang, D. Song, F. Lu, "Electrochemical corrosion behavior of ultrafinegrained Mg alloy ZE41A through severe plastic deformation," Procedia Engineering, vol. 27, pp.1817–1822, 2012.

Xin, Li, Jing-hua JIANG, Yong-hao ZHAO, Daojing WEN, and Yun-tian ZHU. "Effect of equalchannel angular pressing and aging on corrosion behavior of ZK60 Mg alloy," Transactions of Nonferrous Metals Society of China, vol. 25, pp. 3909-3920, 2015.

Y. Yan, H. Cao, Y. Kang, K. Yu, T. Xiao, J. Luo, "Effects of Zn concentration and heat treatment on the microstructure , mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy," Journal of Alloys and Compounds, vol. 693, pp. 1277–1289, 2017.

Gopi, Karekere Rangaraju, and Hanumanthappa Shivananda Nayaka. "Tribological and corrosion properties of AM70 magnesium alloy processed by equal channel angular pressing," Journal of Materials Research, vol. 32, pp. 2153-2160, 2017.

Fan, Qiang, Wei Liang, Li Ping Bian, and Man Qing Cheng. "Effect of ECAP Pass on Corrosion Behavior of High-Al Content Magnesium Alloys," Materials Science Forum, vol. 747, pp. 270-275, 2013.

J. Jiang, L. Yin, F. Lu, A. Ma, D. Song, L. Zhang, D. Yang, J. Chen, L. Yin, F. Lu, A. Ma, D. Song, L. Zhang, D. Yang, J. Chen, "equal channel angular pressing Microstructure and corrosion behaviour of processed by equal channel angular pressing," corrosion science, vol. 2782 , pp. 0–5, 2014.

I.A. Shahar, T. Hosaka, S. Yoshihara, B.J. Macdonald, "Mechanical and Corrosion Properties of AZ31 Mg Alloy Processed by Equal-Channel Angular Pressing and Aging," Procedia Engineeing, vol. 184, pp. 423–431, 2017.

Hamu, G. Ben, D. Eliezer, and L. Wagner. "The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy," Journal of Alloys and Compounds, vol. 468, pp. 222- 229, 2009.

B. Ratna Sunil, T.S. Sampath Kumar,Uday Chakkingal, V. Nandakumar, Mukesh Doble, V. Devi Prasad, M. Raghunath, "In vitro and in vivo studies of biodegradable fine grained AZ31 magnesium alloy produced by equal channel angular pressing," Materials Science and Engineering C. vol. 59, pp.356–367, 2016.

X.N. Gu, N. Li, Y.F. Zheng, F. Kang, J.T. Wang, Liquan Ruan, "In vitro study on equal channel angular pressing AZ31 magnesium alloy with and without back pressure," Materials Science and Engineering B, vol. 176, pp.1802–1806, 2011.

Fan Zhang, Aibin Ma, Jinghua Jiang, Honglu Xu, Dan Song, Fumin Lu, Yoshinori Nishida, "Enhanced biodegradation behavior of ultrafinegrained ZE41A magnesium alloy in Hank's solution," Progress in Natural Science: Materials International, vol. 23, pp.420–424, 2013.

M. Esmaily, J.E. Svensson, S. Fajardo, N. Birbilis, G.S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, L.G. Johansson, "Fundamentals and advances in magnesium alloy corrosion," Progress in Materials Science, vol. 89, pp.92– 193, 2017.

B. Landk, "Magnesium Applications in Aerospace and Electronic Industries", Magnesium Alloy. Their Applications, vol.2, pp.168–172, 2006.

D. Xu, E. Han, Y. Xu, "Materials International Effect of long-period stacking ordered phase on microstructure , mechanical property and corrosion resistance of Mg alloys : A review," Progress in Natural Science: Materials International, vol. 26, pp. 117–128, 2016.

Dziubińska, A., Gontarz, A., Dziubiński, M. and Barszcz, M., "The forming of magnesium alloy forgings for aircraft and automotive applications." Advances in Science and Technology Research Journal, vol. 10, pp. 158–168, 2016.

G. Sahu, "A Brief Review on Mg Alloys their Properties and Application," Int. J. Adv. Res. Sci. Eng. vol.8354, pp. 65–71, 2015.

K. Hono, C.L. Mendis, T.T. Sasaki, "Towards the development of heat-treatable highstrength wrought Mg alloys," Scripta. Materialia. vol.63, pp. 710–715, 2010.

R. Rajeshkumar, J. Jayaraj, A. Srinivasan, U.T.S. Pillai, "Investigation on the microstructure , mechanical properties and corrosion behavior of Mg-Sb and Mg-Sb-Si alloys," Journal of Alloys and Compounds, vol. 691, pp. 81–88, 2017.

T. Profile, L. Alloys, F.O.R. Marine, E., M. Engineers, C, "Light Alloys For Marine Engines". This paper by A. J. Murphy is reprinted from the March 1945 issue of the Transactions of the Marine Engineers., (1945).

Y. Chen, Z. Xu, C. Smith, J. Sankar, "Recent advances on the development of magnesium alloys for biodegradable implants," Acta Biomater., vol. 10, pp. 4561–4573, 2014.

Froes, F. H., Eliezer, D., & Aghion, E. "The science, technology, and applications of magnesium." Jom, vol.50, pp.30-34, 1998.

Leiva, Daniel R., Daniel Fruchart, Maria Bacia, Grégory Girard, Natalya Skryabina, André CS Villela, Salvatore Miraglia, Dilson S. Santos, and Walter J. Botta. "Mg alloy for hydrogen storage processed by SPD," International Journal of Materials Research, vol. 100, pp. 1739-1746, 2009.

M.A. Agwa, M.N. Ali, A.E. Al-shorbagy, "Mechanics of Materials Optimum processing parameters for equal channel angular pressing," Mechanics of Materials, vol. 100, pp.1–11, 2016.

Naik, Gajanan M., Gopal D. Gote, and S. Narendranath, "Microstructural and Hardness evolution of AZ80 alloy after ECAP and postECAP processes," Materials today: Proceedings, vol. 5, pp.17763-17768, 2018.

Hui Feng, Shuhong Liu, Yong Du, Ting Lei, Rongchang Zeng, Tiechui Yuan, "Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys," Journal of Alloys and Compounds, vol. 695, pp. 2330-2338, 2017.

J. Shen, V. Gärtnerová, L.J. Kecskes, K. Kondoh, Q. Wei, "Residual stress and its effect on the mechanical properties of Y-doped Mg alloy fabricated via back-pressure assisted equal channel angular pressing ( ECAP-BP )," Materials Science & Engineering A, vol. 669, pp. 110–117, 2016.

Sabirov, I., M. T. Perez-Prado, M. Murashkin, J. M. Molina-Aldareguia, E. V. Bobruk, N. F. Yunusova, and R. Z. Valiev. "Application of equal channel angular pressing with parallel channels for grain refinement in aluminium alloys and its effect on deformation behavior," International Journal of Material Forming, vol. 3, pp. 411-414, 2010.

Edward Ghali, Wolfgang Dietzel, and KarlUlrich Kainer, "General and Localized Corrosion of Magnesium Alloys: A Critical Review," Journal of materials engineering and performance, vol. 13, pp.7-23, 2004.

Zeng, Rong-chang, Jin Zhang, Wei-jiu Huang, W. Dietzel, K. U. Kainer, C. Blawert, and K. E. Wei. "Review of studies on corrosion of magnesium alloys," Transactions of Nonferrous Metals Society of China, vol. 16, pp.763-771, 2006.

S. Agarwal, J. Curtin, B. Duffy, S. Jaiswal, "Biodegradable magnesium alloys for orthopaedic applications : A review on corrosion, biocompatibility and surface modifications," Materials Science and Engineering. C, vol. 68, pp. 948–963, 2016.

Poinern, G. Eddy Jai, Sridevi Brundavanam, and Derek Fawcett. "Biomedical magnesium alloys: a review of material properties, surface modifications and potential as a biodegradable orthopaedic implant," American Journal of Biomedical Engineering, vol. 2, pp. 218-240 (2012).

Naik, Gajanan M., Gopal D. Gote, S. Narendranath, and SS Satheesh Kumar, "The impact of homogenization treatment on microstructure microhardness and corrosion behavior of wrought AZ80 magnesium alloys in 3.5 wt% NaCl solution," Materials Research Express, vol. 5, pp. 086513, 2018.

Kappes, Mariano, Mariano Iannuzzi, and Ricardo M. Carranza. "Hydrogen embrittlement of magnesium and magnesium alloys: a review," Journal of The Electrochemical Society, vol. 160, pp. 168-178, 2013.

Ren Xiaodong, Li Xuesong, Yang Yue, Yang You, Wu Hua, "Corrosion Behavior and Electrochemical Properties of As-cast Mg- 2Zn-0.5Ca-Y Series Magnesium Alloys in Hank's Solution and NaCl Solution," Rare Metal Materials and Engineering, vol. 46, pp. 45-50, 2017.

L.B. Tong, Q.X. Zhang, Z.H. Jiang, J.B. Zhang, J. Meng, L.R. Cheng, H.J. Zhang, "Microstructures , mechanical properties and corrosion resistances of extruded Mg – Zn – Ca – x Ce / La alloys," Journal of the mechanical behavior of biomedical materials, vol. 62, pp.57–70, 2016.

C. Zhao, F. Pan, H. Pan, "Microstructure, mechanical and bio-corrosion properties of asextruded Mg − Sn − Ca alloys," Transactions of Nonferrous Metals Society of China, vol. 26, pp. 1574–1582, 2016.

C. Zhao, F. Pan, L. Zhang, H. Pan, K. Song, A. Tang, "Microstructure, mechanical properties , bio-corrosion properties and cytotoxicity of asextruded Mg-Sr alloys," Materials Science and Engineering. C, vol. 70, pp. 1081–1088, 2017.

F. Wei, W. Zhang, T. Zhang, F. Wang, "Effect of variations of Al content on microstructure and corrosion resistance of PEO coatings on Mg-Al alloys," Journal of Alloys and Compounds, vol. 690, pp. 195–205, 2017.

H.R. Bakhsheshi-rad, M. Abdellahi, E. Hamzah, A. Fauzi, M. Bahmanpour, "Modelling corrosion rate of biodegradable magnesium-based alloys : The case study of Mg-Zn-RE- x Ca ( x ¼ 0, 0.5, 1.5, 3 and 6 wt %) alloys," Journal of Alloys and Compounds, vol. 687, pp.630–642, 2016.

Z. Geng, D. Xiao, L. Chen, "Microstructure , mechanical properties , and corrosion behavior of degradable Mg-Al-Cu-Zn-Gd alloys," Journal of Alloys and Compounds, vol. 686, pp. 145–152, 2016.

Z. Zhang, X. Liu, W. Hu, J. Li, Q. Le, L. Bao, Z. Zhu, J. Cui, "Microstructures , mechanical properties and corrosion behaviors of Mg – Y – Zn – Zr alloys with specific Y / Zn mole ratios," Journal of Alloys and Compounds, vol. 624, pp. 116–125, 2015.

D. Song, A.B. Ma, J.H. Jiang, P.H. Lin, D.H. Yang, J.F. Fan, "Corrosion behaviour of bulk ultra-fine grained AZ91D magnesium alloy fabricated by equal-channel angular pressing," corrosion science, vol. 53, pp. 362–373, 2011.

Minárik, P., R. Král, and M. Janeček. "Effect of ECAP processing on corrosion resistance of AE21 and AE42 magnesium alloys," Applied Surface Science, vol. 28, pp. 44-48, 2013.

J. Jiang, Q. Zhou, J. Yu, A. Ma, D. Song, F. Lu, L. Zhang, D. Yang, J. Chen, "Comparative analysis for corrosion resistance of micro-arc oxidation coatings on coarse-grained and ultrafi ne grained AZ91D Mg alloy," Surface Coating and Technology, vol. 216, pp. 259– 266, 2013.

op't Hoog, Cot, N. Birbilis, and Y. Estrin. "Corrosion of pure Mg as a function of grain size and processing route," Advanced Engineering Materials, vol.10, pp. 579-582, 2008.

Taito Hosaka, Shoichiro Yoshihara, Iman Amanina, Bryan J. MacDonald, "Influence of Grain Refinement and Residual Stress on Corrosion Behavior of AZ31 Magnesium Alloy Processed by ECAP in RPMI-1640 Medium," Procedia Engineering, vol. 184, pp. 432 – 441, 2017.

Junyi Zhang, Zhixin Kang, Fen Wang, "Mechanical properties and biocorrosion resistance of the Mg-Gd-Nd-Zn-Zr alloy processed by equal channel angular pressing," Materials Science and Engineering C. vol. 68, pp. 194–197, 2016.

J. Vrátná, B. Hadzima, M. Bukovina, and M. Janeček, “Room temperature corrosion properties of AZ31 magnesium alloy processed by extrusion and equal channel angular pressing,” Journal of Materials Science, vol. 48, pp. 4510–4516, 2013.

Xie, Qiuyuan, Aibin Ma, Jinghua Jiang, Zhaojun Cheng, Dan Song, Yuchun Yuan, and Huan Liu. "Stress Corrosion Cracking Behavior of Fine-Grained AZ61 Magnesium Alloys Processed by Equal-Channel Angular Pressing," Metals, vol.7, pp. 343-348, 2017.

Naik, Gajanan M., Gopal D. Gote, S. Narendranath, and SS Satheesh Kumar,"Influence of ECAP processing routes on microstructure mechanical properties and corrosion behavior of AZ80 Mg alloy," AIP Conference Proceedings, vol. 2082, pp. 030016, 2019.

Atrens, S Johnston, Z Shi, MS Dargusch, "Viewpoint – Understanding Mgcorrosion in the body for biodegradable medical implants," Scripta Materialiavol.154, pp. 92-100, 2018.

A Atrens, GL Song, F Cao, Z Shi, PK Bowen, "Advances in Mg corrosion and research suggestions," Journal of Magnesium and Alloys, vol.1, pp. 177-200, 2013.

A. Atrens, G.-L. Song, M. Liu, Z. Shi, F. Cao, M.S. Dargusch, "Review of recent developments in the field of magnesium corrosion," Advanced Engineering Materials, vol. 17, pp. 400-453 (2015).

G Song, "A Atrens Understanding magnesium corrosion mechanism: a framework for improved alloy performance," Advanced Engineering Materials, vol. 5, pp. 837-858, 2003.

G Song, "A Atrens, Corrosion mechanisms of magnesium alloys," Advanced Engineering Materials, vol. 1,pp. 11-33, 1999.

Z Shi, M Liu, A Atrens, "Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation," Corrosion Science, vol. 52, pp. 579-588, 2010.

Gajanan M Naik, Gopal D.Gote, Narendranath S and S.S. Satheesh Kumar, " Effect of grain refinement on the performance of AZ80 Mg alloys during wear and corrosion," Advances in Materials Research, vol. 7, pp. 105-118, 2018.

Naik, Gajanan M., S. Narendranath, and SS Satheesh Kumar. "Effect of ECAP Die Angles on Microstructure Mechanical Properties and Corrosion Behavior of AZ80 Mg Alloy," Journal of Materials Engineering and Performance, vol. 28, pp. 2610-2619, 2019.

ดาวน์โหลด

เผยแพร่แล้ว

2019-06-29

วิธีการอ้างอิง

[1]
G. . Manjunath Naik, N. Sannayellappa, และ S. Selvin Satheesh Kumar, “Corrosion of ECAPed Magnesium alloys and its background: A review”, J Met Mater Miner, ปี 29, ฉบับที่ 2, มิ.ย. 2019.

ฉบับ

ปีที่ 29 ฉบับที่ 2 (2019)

บท

บทความปริทรรศน์

การอนุญาต

ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.