Piezoceramic-polymer and piezoceramic-cement composites: A brief review
คำสำคัญ:
Piezoceramic-polymer, Piezoceramic-cement, Compositesบทคัดย่อ
The physical properties of piezoceramic-polymers and lead-based or lead-free - Portland cement or geopolymer are described as part of this brief review. The connectivities such as 0-3, 1-3, 2-2 and 3-3 were employed to fabricate the composites. Their physical properties such as dielectric, coupling constant, acoustic impedance etc. were measured. The acoustic impedance obtained from the PZT-epoxy resin (0-3/1-3 connectivity) showed quite low. This can be further developed to match with water or human tissue for both hydrophone and medical applications. The properties of the composites containing lead-based or lead-free cement or geopolymer were also revealed. The results prove that these composites have a high potential to be employed as green building materials and smart concrete sensors in the future. A thin film of piezopolymer-metal oxide composite could also be developed to perform energy harvesting properties.Downloads
เอกสารอ้างอิง
R. C. Buchanan, Ceramic Materials for electronics, processing, properties and applications. New York: Marcel Dekker, 1986.
J. V. Randeraat and R. E. Setterington, Piezoelectric Ceramic. London: Mullard, 1974, pp. 23-44.
R. E. Newham, D. P. Skinner and L. E. Cross, “Connectivity and piezoelectric-pyroelectric composites,” Materials Research Bulletin, vol. 13, pp. 525-536, 1978.
A. J. Moulson and J. M. Herbert, Electroceramic, Materials, Properties Applications 2nd edition, England: John Wiley & Sons, Ltd., 2003.
H. J. Lee, S. Zhang, Y. Bar-Cohen and S. Sherrit, “High Temperature, High Power Piezoelectric Composite Transducers,” Sensors, vol. 14, pp. 14526-14552, 2014.
W. Nhuapeng and T. Tunkasiri, “Properties of 0-3 Lead Zirconate Titanate-Polymer Composites Prepared in a Centrifuge,” Communications of the American Ceramic Society, vol. 85, pp. 700-702, 2002.
D. A. van den Ende, W. A. Groen, and S. Vander Zwaag, “The effect of calcining temperature on the properties of 0-3 piezoelectric composites of PZT and a liquid crystalline thermosetting polymer,” Journal of Electroceramics, vol. 27, pp. 13-19, 2011.
M. T. Sebastian and H. Jantunen, “PolymerCeramic Composites of 0-3 connectivity for Circuits in Electronics: A Review,” International Journal of Applied Ceramic Technology, vol. 7, pp. 415-434, 2010.
J. Tontrakoon, G. Rujijanagul, K. Pengpat, S. Eitssayeam, U. Intatha, R. Sanjoom, and T. Tunkasiri, “The fabrication and dielectric constant of (1-3) piezoceramic polymer composites,” Key Engineering Materials, vol. 690, pp. 39-44, 2016.
W. Thamjaree, W. Nhuapeng, A. Chaipanich, and T. Tunkasiri, “Fabrication of combined 0- 3 and 1-3 connectivities PZT/epoxy resin composites,” Applied Physics A, vol. 81, pp. 1419-1422, 2005.
H. Taunaumang, I. L. Guy, and H. L. W. Chan, “Electromechanical properties of 1-3 piezoelectric ceramic/piezoelectric polymer composites,” Journal of Applied Physics, vol. 76, pp. 484-489, 1994.
R. W. C. Lewis, A. C. Dent, and C. R. Bowen, “Network Modelling of 3-3 Piezocomposite Materials,” Ferroelectrics, vol. 351 pp. 216- 224, 2007.
S. Hunpratub, T. Yamwong, S. Srilomsak, S. Maensiri, and P. Chindaprasert, “Effect of particle size on the dielectric and piezoelectric properties of 0-3BCTZO/cement composites,” Ceramics International, vol. 40, pp. 1209- 1213, 2014.
S. Hunpratub, S. Phokha, S. Maensiri, and P. Chindaprasert, “Dielectric Properties of 0- 3BCTZO/High Calcium Fly Ash Geopolymer Composites,” Ferroelectrics Letters Section, vol. 42, pp. 115-121, 2015.
N. Jaitanong, H. R. Zeng, G.R. Li, Q.R. Yin, R. Yimnirun and A. Chaipanich, “Investigations on Morphology and Domain Configuration in 0-3 Lead Magnesium Niobate Titanate Portland Cement Composites by SEM and PFM,” Ferroelectrics, vol. 455, pp. 111-116, 2013.
A. Chaipanich, R. Rianyoi, R. Potong, N. Jaitanong, and P. Chindaprasirt, “Compressive Strength and Microstructure of 0-3 Lead Zirconate Titanate Ceramic-Portland Cement Composites,” Ferroelectrics, vol. 457, pp. 53- 61, 2013.
R. Rianyoi, R. Potong, A. Ngamjarurojana, and A. Chaipanich, “Microstructure and electrical properties of 0-3 connectivity barium titanateportland cement composites with 40% barium titanate content” Ferroelectrics Letters Section, vol. 43, pp. 59-64, 2016.
P. Chomyen, R. Potong, R. Rianyoi, A. Ngamjarurojana, P. Chindaprasirt, and A. Chaipanich, “Microstructure, dielectric and piezoelectric properties of 0-3 lead free barium zirconate titanate ceramic-portland fly ash cement composites,” Ceramics International, vol. 44, pp. 76-82, 2018.
R. Rianyoi, R. Potong, A. Ngamjarurojana, R. Yimnirun, R. Guo, A.S. Bhalla, and A. Chaipanich, “Acoustic, Dielectric and Piezoelectric Properties of 1-3 Connectivity Barium Titanate-Portland Cement Composites,” Ferroelectrics, vol. 452, pp. 76-83, 2013.
R. Potong, R. Rianyoi, A. Ngamjarurojana, and A. Chaipanich, “Dielectric and piezoelectric properties of 1-3 non-lead barium titanateportland cement composites,” Ceramics International, vol. 39, pp. S53-S57, 2013.
R. Rianyoi, R. Potong, R. Yimnirun, R. Guo, A. S. Bhalla, and A. Chaipanich, “Electromechanical Coupling Coefficient of 1-3 Connectivity Barium Titanate-Portland Cement Composites,” Integrated Ferroelectrics, vol. 148, pp. 138-144, 2013.
A. Chaipanich, R. Rianyoi, R. Potong, P. Penpokai, and P. Chindaprasirt, “Dielectric and Piezoelectric Properties of 2-2 PZT-Portland Cement Composites,” Integrated Ferroelectrics, vol. 149, pp. 89-94, 2013.
R. Potong, R. Rianyoi, A. Ngamjarurojana, and A. Chaipanich, “Fabrication and performance investigation of 2-2 connectivity lead-free barium zirconate titanate-portland cement composites,” Ceramics International, vol. 40, pp. 8723-8728, 2014.
X. Dongyu, C. Xin, S. Banerjee, and H. Shifeng, “Design, fabrication, and properties of 2-2 connectivity cement/polymer based piezoelectric composites with varied piezoelectric phase distribution,” Journal of Applied Physics, vol. 116, pp. 244103, 2014.
P. Gowdhaman, V. Annamalai, and O.P. Thakur, “Piezo, ferro and dielectric properties of ceramicpolymer composites of 0-3 connectivity,” Ferroelectrics, vol. 493, pp. 120-129, 2016.
N. Jaitanong, S. Narksitipan, and A. Chaipanich, “Ferroelectric and dielectric properties of cement pozzolan-PSrZT ceramic composites with PVDF polymer as a third phase,” Integrated Ferroelectrics, vol. 187, pp. 203-209, 2018.
S. Dash, R. N. P. Choudhary, and M. N. Goswami, “Enhanced dielectric and ferroelectric properties of PVDF-BiFeO3 composites in 0-3 connectivity,” Journal of Alloys and Compounds, vol. 715, pp. 29-36, 2017.
S. Moharana, M. K. Mishra, M. Chopkar, and R. N. Mahaling, “Enhanced dielectric properties of surface hydroxylated bismuth ferrite-poly (vinylidene fluoride-co-hexafluoropropyleane) composites for energy storage devices,” Journal of Science: Advanced Materials and Devices, vol. 1, pp. 461-467, 2016.
K. Phooplub and N. Muensit, “Electromechanical properties of poly (vinylidene fluoride-hexa fluoropropylene) reinforced with zinc oxide nanostructure,” Micro & Nano Letters, vol. 13, pp. 1063-1067, 2018.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2019 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
