Fabrication and characterization of heterojunction for CdS thin films and CuAlO<sub>2</sub> ceramic pill substrate
บทคัดย่อ
In this research paper, CdS thin films were deposited by thermal evaporation in vacuum on CuAlO2 ceramic pill substrate. From the data of I-V measurements at low temperature (20-300 K) the junction barrier height, ideality factor and series resistance values can be evaluated by using thermionic emission (TE) theory and Cheung’s method. The junction barrier height and ideality factor were found to be strong temperature dependence. Evaluation of forward I-V data reveals a decrease in the zero-bias barrier height, but an increase in the ideality factor with decrease in temperature. In part of C-V measurements at room temperature, the obtained built-in potential value being 0.586 V is well consistent with the junction barrier height value evaluated from I-V measurements.Downloads
Download data is not yet available.
ดาวน์โหลด
เผยแพร่แล้ว
2012-12-23
วิธีการอ้างอิง
[1]
T. Gaewdang, N. Wongcharoen, A. Nopparuchikun, T. Wongcharoen, และ C. Poo-Rakkiat, “Fabrication and characterization of heterojunction for CdS thin films and CuAlO<sub>2</sub> ceramic pill substrate”, J Met Mater Miner, ปี 22, ฉบับที่ 2, ธ.ค. 2012.
ฉบับ
บท
Original Research Articles
การอนุญาต
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.