Lightning strike response of composite structures: A review

Akhileshwar PANDEY; Ashutosh Kumar UPADHYAY; Karunesh Kumar SHUKLA

doi:10.55713/jmmm.v31i1.749

ผู้แต่ง

Akhileshwar PANDEY Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, 211004, India
Ashutosh Kumar UPADHYAY Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, 211004, India
Karunesh Kumar SHUKLA Department of Applied Mechanics, Motilal Nehru National Institute of Technology Allahabad, Prayagraj, 211004, India

DOI:

https://doi.org/10.55713/jmmm.v31i1.749

คำสำคัญ:

Lightning strike, CFRP, Lightning strike protection, Wind turbine blades, Aircraft structure

บทคัดย่อ

Wind turbines and aircraft are generally made of less conductive carbon/glass composites. Significant damages may occur to these materials if they are struck by high energy lightning strikes. Damage and structural response of composites is essentially a multiphysics domain, involving thermal, electrical, magnetic and structural analysis. In this article, the fundamental physics of lightning, multiphysics analysis, numerical implementation and experimental studies about composite materials are reviewed. The relevant international standards and possible characterization methods of lightning strike damage are also reproduced in this article. In addition to this, the current and prospective technologies, to protect composite from lightning strikes are also provided.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

I. Cotton, N. Jenkins, and K. Pandiaraj, “Lightning protection for wind turbine blades and bearings,” Wind Energy: An International Journal for Progress and Applications in Wind Power Conversion Technology, vol. 4(1), pp. 23-37, 2001.

P. Feraboli, and M. Miller, “Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike,” Composites Part A: Applied Science and Manufacturing, vol. 40(6-7), pp. 954-967, 2009.

J. Gou, Y. Tang, F. Liang, Z. Zhao, D. Firsich, and J. Fielding, “Carbon nanofiber paper for lightning strike protection of composite materials,” Composites Part B: Engineering, vol. 41(2), pp. 192-198, 2010.

G.W. Reid, “Mechanical damage to aircraft structures from lightning strikes. Proceedings of the Institution of Mechanical Engineers,” Part G: Journal of Aerospace Engineering, vol. 207(1), pp. 1-14, 1993.

I.A. Metwally, A.A A-Rahim, F.Heidler, and W.Zischank, “Computation of transient-temperature profiles in objects exposed to simulated lightning currents,” In 2003 IEEE Bologna Power Tech Conference Proceedings, vol. 1, pp. 6, 2003.

V.A. Rakov, and M. Uman, Lightning: physics and effects, Cambridge Univ, 2003.

D. Morgan, C. J Hardwick, S. J Haigh, and A. J Meakins, “The interaction of lightning with aircraft and the challenges of lightning testing,” AerospaceLab, vol. (5), pp.1, 2012.

I EC61400-24:2010, Wind turbines - Part 24: Lightninprotection, Availablefrom: https://webstore.iec.ch/publication/5437.

Y. Hirano, S. Katsumata, Y. Iwahori, and A. Todoroki, “Artificial lightning testing on graphite/epoxy composite laminate,” Composites Part A: Applied Science and Manufacturing, vol. 41(10), pp. 1461-1470, 2010.

Y. Li, R. Li, L. Lu, and X. Huang, “Experimental study of damage characteristics of carbon woven fabric/epoxy laminates subjected to lightning strike,” Composites Part A: Applied Science and Manufacturing, vol. 79, pp. 164-175, 2015.

F.S. Wang, X.S. Yu, S.Q Jia, and P. Li, “Experimental and numerical study on residual strength of aircraft carbon/epoxy composite after lightning strike,” Aerospace Science and Technology, vol 75, pp. 304-314, 2018.

L. Salah, C. Kuruppuarachchige, and R. Salagame, “NASA LSP Composite Substrate Destructive Evaluation Test,” National Institute for Aviation Research Report. Wichita State University, June 2013.

T. Ogasawara, Y. Hirano, and A. Yoshimura, “Coupled thermal electrical analysis for carbon fiber/epoxy composites exposed to simulated lightning current,” Composites Part A: Applied Science and Manufacturing, vol. 41(8), pp. 973-981, 2010.

G. Abdelal, and A. Murphy, “Nonlinear numerical modelling of lightning strike effect on composite panels with temperature dependent material properties,” Composite Structures, vol. 109, pp. 268-278, 2014.

R. Muñoz, S. Delgado, C. González, B. López-Romano, D.Y. Wang, and J. LLorca, “Modeling lightning impact thermo-mechanical damage on composite materials,” Applied Composite Materials, vol. 21(1), pp. 149-164, 2014.

Z.Q. Liu, Z.F. Yue, F.S. Wang, and Y.Y. Ji, “Combining analysis of coupled electrical-thermal and blow-off impulse effects on composite laminate induced by lightning strike,” Applied Composite Materials, vol. 22(2), pp. 189-207, 2015.

F.S. Wang, N. Ding, Z.Q. Liu, Y.Y. Ji, and Z.F. Yue, “Ablation damage characteristic and residual strength prediction of carbon fiber/epoxy composite suffered from lightning strike,” Composite Structures, vol. 117, pp. 222-233, 2014.

J.A. Dec, “Three dimensional finite element ablative thermal response analysis applied to heatshield penetra- tion design,” PhD thesis, Georgia Institute of Technology, 2010.

Y. Wang, and O.I. Zhupanska, “Thermal ablation in fiber-reinforced composite laminates subjected to continuing lightning current,” In 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, pp. 986, 2016.

Y. Guo, Q. Dong, J. Chen, X. Yao, X. Yi, and Y. Jia, “Comparison between temperature and pyrolysis dependent models to evaluate the lightning strike damage of carbon fiber composite laminates,” Composites Part A: Applied Science and Manufacturing, vol. 97, pp. 10-18, 2017.

D.J. Kovach, and G.J. Erickson, “LSP Composite Susbtrate Destructive Evaluation Test Assessment Manual,” Technical report, NASA, 2013.

R. Negarestani, L. Li, H.K. Sezer, D. Whitehead, and J. Methven, “Nano-second pulsed DPSS Nd: YAG laser cutting of CFRP composites with mixed reactive and inert gases,” The International Journal of Advanced Manufacturing Technology, vol. 49(5-8), pp. 553–566, 2010.

S. Feih, and A.P. Mouritz, “Tensile properties of carbon fibres and carbon fibre–polymer composites in fire,” Composites Part A: Applied Science and Manufacturing, vol. 43(5), pp. 765-772, 2012.

Department of Denfenseï¿œ. Electromagnetic environmental effects requirements for systems, 1997.

S. Kamiyama, Y. Hirano, T. Okada, and T. Ogasawara, “Lightning strike damage behavior of carbon fiber reinforced epoxy, bismaleimide, and polyetheretherketone composites,” Composites Science and Technology, vol. 161, pp. 107-114, 2018.

J.A. Dec, R.D. Braun, and B. Lamb, “Ablative thermal response analysis using the finite element method,” Journal of thermophysics and heat transfer, vol. 26(2), pp. 201-212, 2012.

H. Chen, F.S. Wang, X.T. Ma, and Z.F. Yue, “The coupling mechanism and damage prediction of carbon fiber/epoxy composites exposed to lightning current,” Composite Structures, vol. 203, pp. 436-445, 2018.

Y.Li, T. Xue, R. Li, X. Huang, and L. Zeng, “Influence of a fiberglass layer on the lightning strike damage response of cfrp laminates in the dry and hygrothermal environments,” Composite Structures, vol. 187, pp. 179-189, 2018.

L. Chemartin, Ph. Lalande, B. Peyrou, A. Chazottes, P.Q. Elias, C. Delalondre, B.G. Cheron, and F. Lago, “Direct effects of lightning on aircraft structure: analysis of the thermal, electrical and mechanical constraints,” AerospaceLab, 2012.

P. Foster, G. Abdelal, and A. Murphy, “Quantifying the Influence of Lightning Strike Pressure Loading on Composite Specimen Damage,” Applied Composite Materials, pp. 1-23, 2018.

A.C. Garolera, S.F. Madsen, M. Nissim, J.D. Myers, and J. Holboell, “Lightning damage to wind turbine blades from wind farms in the US,” IEEE Transactions on Power Delivery, vol. 31(3), pp. 1043-1049, 2016.

S.F. Madsen, “Interaction between electrical discharges and materials for wind turbine blades-particularly related to lightning protection,” PhD thesis, Technical University of Denmark, 2006.

V. Cooray, V. Rakov, and N. Theethayi, “The lightning striking distance Revisited,” Journal of Electrostatics, vol. 65(5-6), pp. 296-306, 2007.

Y. Wang, and O.I. Zhupanska, “Estimation of the electric fields and dielectric breakdown in non- conductive wind turbine blades subjected to a lightning stepped leader,” Wind Energy, vol. 20(5), pp. 927-942, 2017.

Y. Wang, and W. Hu, “Investigation of the effects of receptors on the lightning strike protection of wind turbine blades,” IEEE Transactions on Electromagnetic Compatibility, vol. 59(4), pp. 1180-1187, 2017.

Y. Wang, “Multiphysics analysis of lightning strike damage in laminated carbon/glass fiber reinforced poly- mer matrix composite materials: A review of problem formulation and computational modeling,” Composites Part A: Applied Science and Manufacturing, vol. 101, pp. 543-553, 2017.

A.P. Mouritz, S. Feih, E. Kandare, Z. Mathys, A.G. Gibson, P.E. Des Jardin, S.W. Case, and B.Y. Lattimer, “Review of fire structural modelling of polymer composites,” Composites Part A: Applied Science and Manufacturing, vol. 40(12), pp. 1800-1814, 2009.

Q. Dong, G. Wan, Y. Guo, L. Zhang, X. Wei, X.Yi, and Y. Jia, “Damage analysis of carbon fiber composites exposed to combined lightning current components d and c,” Composites Science and Technology, 2019.

Y. Hirano, T. Yokozeki, Y. Ishida, T. Goto, T. Takahashi, D. Qian, S. Ito, T. Ogasawara, and M. Ishibashi, “Lightning damage suppression in a carbon fiber-reinforced polymer with a polyaniline-based conductive thermoset matrix,” Composites Science and Technology, vol. 127, pp. 1-7, 2016.

S. Mall, B.L. Ouper, and J.C. Fielding, “Compression strength degradation of nanocomposites after lightning strike,” Journal of composite materials, vol. 43(24), pp. 2987-3001, 2009.

A.M. Amaro, P.N. B Reis, J.B. Santos, M.J. Santos, and M.A. Neto, “Effect of the electric current on the impact fatigue strength of CFRP composites,” Composite Structures, vol. 182, pp. 191-198, 2017.

G.N. Szatkowski, K.L. Dudley, S.V. Koppen, J.J. Ely, T.X. Nguyen, L.A. Ticatch, J.J. Mielnik, and P.A. Mcneill, “Common practice lightning strike protection characterization technique to quantify damage mechanisms on composite substrates,” 2013.

A. Katunin, P. Sul, A. Łasica, K. Dragan, K. Krukiewicz, and R. Turczyn, “Damage resistance of CSA-doped PANI/epoxy CFRP composite during passing the artificial lightning through the aircraft rivet,” Engineering Failure Analysis, vol. 82, pp. 116-122, 2017.

B. Wang, Y. Duan, Z. Xin, X. Yao, D. Abliz, and G. Ziegmann, “Fabrication of an enriched graphene surface protection of carbon fiber/epoxy composites for lightning strike via a percolating- assisted resin film infusion method,” Composites Science and Technology, vol. 158, pp. 51-60, 2018.

I. Gaztelumendi, M. Chapartegui, R. Seddon, S. Flórez, F. Pons, and J. Cinquin, “Enhancement of electrical conductivity of composite structures by integration of carbon nanotubes via bulk resin and/or buckypaper films,” Composites Part B: Engineering, vol. 122, pp. 31-40, 2017.

S.F. Madsen, “Interaction between electrical discharges and materials for wind turbine blades particularly related to lightning protection. Ørsted–DTU, Electric Power Engineering,” Technical University of Denmark, PhD thesis, 2006.

J. FTD yeL, “Alkali metal,” Encyclopedia Britannica (Online Edition), 2000.

ASM metal handbook. Available from: http://products.asminternational.org/hbk/index.jsp.

J. Baur, and E. Silverman, “Challenges and opportunities in multifunctional nanocomposite structures for aerospace applications,” MRS bulletin, vol. 32(4), pp. 328-334, 2007.

Graphene properties. Available from: https://graphene-supermarket.com/ home.php.

F.A. Franklin JAP, “Lightning Protection of Aircraft,” Aerospace Safety Research and Data Institute NASA Lewis Research Center US. Government Printing Office, Washington, D.C. 20402, 1977.

D. Brisius, High-performance composites, 2007.

R. Baksht, A. Pokryvailo, Y. Yankelevich, and I. Ziv, “Explosion of thin aluminum foils in air,” Journal of applied physics, vol. 96(11), pp. 6061-6065, 2004.

V. Winey KI, “Polymer nanocomposites,” Technical report, Materials Research Society Bulletin, 2007.

M.H. Al-Saleh, and U. Sundararaj, “A review of vapor grown carbon nanofiber/polymer conductive composites,” Carbon, vol. 47(1), pp. 2-22, 2009.

Y. Guo, Y. Xu, Q. Wang, Q. Dong, X. Yi, and Y. Jia, “Eliminating lightning strike damage to carbon fiber composite structures in zone 2 of aircraft by ni-coated carbon fiber nonwoven veils,” Composites Science and Technology, vol. 169, pp. 95-102, 2019.

R.F. Gibson, “A review of recent research on mechanics of multifunctional composite materials and structures,” Composite structures, vol. 92(12), pp. 2793-2810, 2010.

B. Ashrafi, J. Guan, V. Mirjalili, P. Hubert, B. Simard, and A. Johnston, “Correlation between Young modulus and impregnation quality of epoxy-impregnated SWCNT buckypaper,” Composites Part A: Applied Science and Manufacturing, vol. 41(9), pp. 118-1191, 2010.

X. Luo, and D.D.L. Chung, “Electromagnetic interference shielding using continuous carbon-fiber carbon-matrix and polymer-matrix composites,” Composites Part B: Engineering, vol. 30(3), pp. 227-231, 1999.

B.O. Lee, W.J. Woo, and M-S. Kim, “EMI shielding effectiveness of carbon nanofiber filled poly (vinyl alcohol) coating materials,” Macromolecular Materials and Engineering, vol. 286(2), pp. 114-118, 2001.

V. Kumar, S. Sharma, A. Pathak, B.P. Singh, S.R. Dhakate, T. Yokozeki, T. Okada, and T. Ogasawara, “Interleaved MWCNT buckypaper between CFRP laminates to improve through-thickness electrical conductivity and reducing lightning strike damage,” Composite Structures, vol. 210, pp. 581-589, 2019.

X. Ma, F. Scarpa, H-X Peng, G. Allegri, J. Yuan, and R. Ciobanu, “Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance,” Aerospace Science and Technology, vol. 47, pp. 367-377, 2015.

F. Inam, H. Yan, D.D. Jayaseelan, T. Peijs, and M.J. Reece, “Electrically conductive alumina–carbon nanocomposites prepared by Spark Plasma Sintering,” Journal of the European Ceramic Society, vol. 30(2), pp. 153-157, 2010.

S-Y. Yang, W-N. Lin, Y-Li. Huang, H-W. Tien, J-Y. Wang, C-C M Ma, S-M Li, and Y-S Wang, “Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites,” Carbon, vol. 49(3), pp. 793-803, 2011.

M. Idrees, A. Razaq, A. Islam, S. Yasmeen, K. Sultana, M.H. Asif, and M. Nadeem, “Morphology and Dielectric Properties of Directly Collected and Polyaniline Coated Lignocelluloses Fibers,” Synthetic Metals, vol. 232, pp. 138-143, 2017.

EUROCAE ED-84 – Aircraft Lightning Environment and Related Test Waveform Standard. pp. 26, 1997

EUROCAE ED-91 – Aircraft Lightning Zoning Standard. Amendment 2, pp. 17-22, 2006.

B. Wang, and Y. Zhu, and Y. Ming, and X. Yao, X. Tian, G. Ziegmann, Y. Duan, and J. Sun, “Understanding lightning strike induced damage mechanism of carbon fiber reinforced polymer composites: An experimental study,” Materials & Design, vol. 192, pp. 108724, 2020.

A. Pandey, A.K. Upadhya, and K.K. Shukla, “Numerical studies on damage of carbon/epoxy composites exposed to lightning strike,” International Conference on Energy, Environment & Material Sciences, IEEE UP Section , 2019.

D.M. Lombetti, and A.A. Skordos, “Lightning strike and delamination performance of metal tufted carboncomposites,” Composite Structures, vol. 209, pp. 694-699, 2019.

Hollingsworth & Vose Company. Advanced fiber nonwovens. “Nonwoven veil technology for lightning strike protection”, Presented at the SAMPE 2006. Long Beach (CA); April 30, 2006.

Z. Zhao, Y. Ma, Z. Yang, J. Yu, J. Wang, J. Tong, X. Yi, P. Moreira, and C. Sguazzo, “Light weight non-metallic lightning strike protection film for CFRP”, Materials Today Communications, vol.25, pp 8010-8015, 2020.

Q. Xia, Z. Zhang, H. Mei, Y. Liu, and J. Leng , “A double-layered composite for lightning strike protection via conductive and thermal protection”, Composites Communications, vol. 21, pp 100403, 2020.

D.S. Juan, E. Gordo, A. Jimnez-Morales, and Sirois, “Response of electroless copper coated CFRP laminates to emulated lightning strikes“, Composites Part A: Applied Science and Manufacturing, vol.b140, pp. 106184, 2021.

Y. Guo, Y. Xu, Q. Wang, Q. Dong, X. Yi, and Y. Jia, “Enhanced lightning strike protection of carbon fiber composites using expanded foils with anisotropic electrical conductivity,” Composites Part A: Applied Science and Manufacturing, vol. 117, pp. 211-218, 2019.