Study on structure and luminescence properties of LaBMoO<sub>6</sub>:Dy<sup>3+</sup> phosphor for photonic material applications

Authors

  • Eakgapon Kaewnuam Physics Program, Faculty of Science and Technology, Muban Chombueng Rajabhat University
  • Nuanthip Wantana Faculty of Science and Technology, Nakhon Pathom Rajabhat University and Center of Excellence in Glass Technology and Materials Science (CEGM)
  • Hong Joo Kim Department of Physics, Kyungpook National University
  • Jakrapong Kaewkhao Faculty of Science and Technology, Nakhon Pathom Rajabhat University and Center of Excellence in Glass Technology and Materials Science (CEGM)

Keywords:

Phosphor, Dysprosium, Luminescence

Abstract

Phosphor powder of LaBMoO6:Dy3+ were prepared to investigate the structure, absorption and luminescence properties. The influence of Dy2O3 concentration on these properties were also studied. XRD characterization represents the main structure of phosphor as monoclinic from LaBMoO6 host matrix. From the reflection spectra, Dy3+ in phosphor can absorb more amount of visible light and near infrared radiation with increasing of Dy2O3 concentration. The energy band gap of LaBMoO6 compound was expanded after doping with Dy2O3 which results to the blue shift of absorption edge. The emission spectra perform the strong yellow and blue light emitting under Dy3+ electric dipole (4F9/2 → 6H13/2) and magnetic dipole (4F9/2 → 6H15/2) transition, respectively. Fitting the luminescence decay curve results to Dy3+ emission life time in millisecond. This phosphor performs the potential for using as photonic materials in display/screen and LED devices.

Downloads

Download data is not yet available.

References

B. G. Wybourne, Spectroscopic properties of rare earths. USA: Interscience Publishers, 1965.

B. M. Walsh, “Judd-Ofelt theory: Principles and practices,” in Advances in spectroscopy for lasers and sensing, Di Bartolo, Baldassare, Forte, Ottavio, eds, Netherlands: Springer, 2006, pp. 403-433.

L. Lakshmi Devi, C. Basavapoornima, V. Venkatramu, P. Babu, and C. K. Jayasankar, “Synthesis of Ca2SiO4:Dy3+ phosphors from agricultural waste for solid state lighting applications,” Ceramics International, vol. 43, pp. 16622-16627, 2017.

Z. Zhang, A. Song, S. Song, J. Zhang, W. Zhang, and D. Wang, “Synthesis and luminescence properties of novel KSrPO4:Dy3+ phosphor,” Journal of Alloys and Compounds, vol. 629, pp. 32-35, 2015.

A. K. Kunti, N. Patra, S. K. Sharma, and H. C. Swart, “Radiative transition probability enhancement of white light emitting Dy3+ doped and K+ co-doped BaWO4 phosphors via charge compensation,” Journal of Alloys and Compounds, vol. 735, pp. 2410-2422, 2018.

Y. Zaifa, S. Yumei, X. Qiguang, and S. Jiayue, “Preparation and photoluminescence properties of Dy3+-doped Ba3Lu(PO4)3 phosphors,” Journal of Rare Earths, vol. 33, pp. 1251-1255, 2015.

Z. Yongqing, L. Xuan, L. Jia, and J. Man, “A novel white-emitting phosphor ZnWO4:Dy3+,” Journal of Rare Earths, vol. 33, pp. 350-354, 2015.

B. Han, Y. Dai, J. Zhang, and H. Shi, “Luminescence properties of a novel yellowemitting phosphor NaLaMgWO6:Dy3+,” Materials Letters, vol. 204, pp. 145-148, 2017.

J. Zhao, S. Huang, D. Zhao, J. Chen, Y. Tian, Q. Zong, Y. Fan, C. Nie, and B. Liu, “Synthesis and luminescence of a new yellowish phosphor PbGd1-xB7O13:xDy3+,” Optik, vol. 161, pp. 342-347, 2018.

Y. Yu, L. Li, Z. Lin, and G. Wang, “Growth, structure and optical properties of a nonlinear optical crystal α-LaBMoO6,” Cryst Eng Comm, vol. 15, pp. 5245-5249, 2013.

Z. W. Zhang, D. Q. Ma, Y. Yue, M. Z. Ma, and R. P. Liu, “Wide-band excited LaBMoO6:Eu3+ red phosphor for white-lightemitting diode,” Journal of Alloys and Compounds, vol. 636, pp. 113-116, 2015.

E. Kaewnuma, N. Wantana, and J. Kaewkhao, “Comparative luminescence study of LaBMoO6:Tb phosphor under VIS and nearUV excitation for green photonic applications,” Materials Today: Proceedings, vol. 5, pp. 13940- 13947, 2018.

V. Kroutko, G. Lysanova and M. Komova, JCPDS 00-060-0869, Institute of General and Inorganic Chemistry, RAS, Moscow, Russian Federation, ICDD Grant-in-Aid, 2009.

P. Aldebert, JCPDs 00-040-1284, Institut de Recherche Fondamentale, France: Private Communication, 1988.

W. T. Carnall, P. R. Fields, and K. Rajnak, “Electronic energy levels in the trivalent lanthanide aquo ions. I. Pr3+, Nd3+, Pm3+, Sm3+, Dy3+, Ho3+, Er3+, and Tm3+,” The Journal of Chemical Physics, vol. 49, pp. 4424-4442, 1968.

N. Vijaya, K. Upendra Kumar, and C. K. Jayasankar, “Dy3+-doped zinc fluorophosphate glasses for white luminescence applications,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 113, pp. 145-153, 2013.

E. Kaewnuam, N. Wantana, H. J. Kim, and J. Kaewkhao, “Development of lithium yttrium Borate glass doped with Dy3+ for laser medium, W-LEDs and scintillation materials applications,” Journal of Non-Crystalline Solids, vol. 464, pp. 96-103, 2017.

S. Raya, P. Tadge, S. Dutta, T.M. Chen, G.B. Nair, and S. J. Dhoble, “Synthesis, luminescence and application of BaKYSi2O7:Eu2+: A new blue-emitting phosphor for near-UV whitelight LED,” Ceramics International, vol. 44, pp. 8334-8343, 2018.

S. Gage, D. Evans, M. W. Hodapp, and H. Sorensen, Optoelectronics applications manual. New York: McGraw Hill, 1977.

Downloads

Published

2019-01-10

How to Cite

[1]
E. Kaewnuam, N. Wantana, H. J. Kim, and J. Kaewkhao, “Study on structure and luminescence properties of LaBMoO<sub>6</sub>:Dy<sup>3+</sup> phosphor for photonic material applications”, J Met Mater Miner, vol. 28, no. 2, Jan. 2019.

Issue

Vol. 28 No. 2 (2018)

Section

Original Research Articles

License

Copyright (c) 2018 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

Most read articles by the same author(s)