Vol. 30 No. 2 (2020)

Published: 2020-06-30

Review Articles

  • Tribological properties of carbon-reinforced epoxy composites - A review

    Y Åžahin, H Åžahin
    DOI: https://doi.org/10.55713/jmmm.v30i2.541
  • Ceramic and glass-ceramic fillers in dental composites - A review

    S Ghosh
    DOI: https://doi.org/10.55713/jmmm.v30i2.604
  • In search for near-room-temperature superconducting critical temperature of metal superhydrides under high pressure: A review

    U Pinsook
    DOI: https://doi.org/10.55713/jmmm.v30i2.858

Original Research Articles

  • Preparation of alginate/2-hydroxyethyl methacrylate composite beads: Role of fillers and characteristics of bead formation

    S Urusetthanon, S Udon, B Kusuktham
    DOI: https://doi.org/10.55713/jmmm.v30i2.552
  • Synthesis and fabrication of polyaniline/eggshell composite in ammonia detection

    N A Mazlan, J M Sapari, K P Sambasevam
    DOI: https://doi.org/10.55713/jmmm.v30i2.649
  • Effect of polystyrene molecular weight and zinc oxide concentration on dewetting behavior of polymeric thin films

    K Sujaroon, P Whangdee, N Pangpaiboon
    DOI: https://doi.org/10.55713/jmmm.v30i2.613
  • Synthesis and characterization of ball-milled eggshell and Al2O3 reinforced hybrid green composite material

    S Kumar, S Dwivedi, V K Dwivedi
    DOI: https://doi.org/10.55713/jmmm.v30i2.680
  • Production of silica-based ceramics sintered under nitrogen atmosphere from rice husk and sugarcane bagasse ash

    W Khopthong, B Cherdhirunkorn
    DOI: https://doi.org/10.55713/jmmm.v30i2.615
  • Tribology, mechanical properties and coloration of a mica glass-ceramic

    S Prasertwong, S Angkulpipat, T Srichumpong, K Suputtamongkol, C Thanachayanont, R Sola, G Heness, C Leonelli, D Chaysuwan
    DOI: https://doi.org/10.55713/jmmm.v30i2.627
  • Green-based corrosion protection for mild steel in 3.5 % NaCl and distilled water medias: Jatropha curcas and Roselle extracts

    M A Afandi, S N Saud, E Hamzah
    DOI: https://doi.org/10.55713/jmmm.v30i2.708
  • Effects of sodium silicate as liquid phase sintering additives on properties of alumina ceramics

    K Siriphaisarntavee, C Mongkolkachit, M Jiarawattananon, K Serivalsatit, T Wasanapiarnpong
    DOI: https://doi.org/10.55713/jmmm.v30i2.643
  • XAS analysis of copper binding in soils

    W Siriwong, P Amonpattaratkit, W Klysubun
    DOI: https://doi.org/10.55713/jmmm.v30i2.646
  • Dry-sliding wear of the 316L/h-BN composites produced under crack ammonia atmosphere

    E Chusong, P Kansuwan, N Ohtake, P Wila, N Tosangthum, R Tongsri
    DOI: https://doi.org/10.55713/jmmm.v30i2.700
  • Properties of wood-plastic composites based on pvc/pla/pbat ternary blend

    L Raksaksri, P Chaiwutthinan, A Larpkasemsuk, S Chuayjuljit, A Boonmahitthisud
    DOI: https://doi.org/10.55713/jmmm.v30i2.716
  • Synthesis of hydroxyapatite from cuttlebone under various pH conditions: An approach for medical materials

    S Kangkan, P Arpornmaeklong, S Ummartyotin
    DOI: https://doi.org/10.55713/jmmm.v30i2.741