The correlation between phase formation and the structure of the pellets with the fungal immobilization study as a commercial substrate culture/planting material

Rattiphorn SUMANG; Rampai KODSUEB; Narathip VITAYAKORN; Ruangwut  CHUTIMA

doi:10.55713/jmmm.v32i3.1268

ผู้แต่ง

Rattiphorn SUMANG Program of Physics, Faculty of Science and Technology, Pibulsongkram Rajabhat University, Phitsanulok, 65000, Thailand
Rampai KODSUEB Program of Microbiology, Faculty of Science and Technology, Pibulsongkram Rajabhat University, Phitsanulok, 65000, Thailand
Narathip VITAYAKORN Advanced Materials Research Unit, Department of Chemistry, Faculty of Science, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.
Ruangwut CHUTIMA Program of Biology, Faculty of Science and Technology, Pibulsongkram Rajabhat University, Phitsanulok, 65000, Thailand

DOI:

https://doi.org/10.55713/jmmm.v32i3.1268

คำสำคัญ:

phase formation, microstructure, calcined clay pellet, planting materials

บทคัดย่อ

Calcined clay pellets are popular planting material for those who love to grow plants in pots. The calcined clay pellets consist of clay (C), phosphate rock (PR), and rice husk ash (RHA). [(1-x)(50C–50PR)-xRHA], x(RHA) = 0, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, and 0.65 wt% were prepared by a conventional solid-state reaction method. The samples were made into a spherical shape with a diameter of 10 mm and fired at 600℃ to 1000℃. The effect of x contents on phase formation, microstructure, and chemical properties of [(1-x)(50C–50PR)-xRHA] was studied. X-ray diffraction revealed the typical assemblages with quartz, illite, and kaolinite in all the samples. SEM images of samples showed irregular packing and a highly porous microstructure. The addition of x(RHA) contents results in porous microstructure in all the samples. The surface area and pore volume of samples increased from 8.83 m2·g-1 to 14.71 m2·g-1 and 0.938 cm3·g-1 to 0.942 cm3·g-1, respectively, with the increase of x(RHA). The density of the samples slightly decreased from 2.45±0.06 g·cm-3 to 1.94±0.05 g·cm-3, with an increase in x(RHA) contents. The capability of calcined clay pellets to immobilize plant growth-promoting fungi was then studied. The results showed that orchid endophytes, as plant growth-promoting fungi, grow well on the calcined clay pellets saturated with potato dextrose broth (PDB). Besides, all fungi can live on calcined clay pellets and stay viable for at least 35 days after inoculation. These results suggested that the calcined clay pellets could serve as planting material that enhances plant growth (via its nutrients and growth-promoting fungi) simultaneously.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

T. Beddes, R. Anderson, and R. Ramirez, “Calcined Clay Improves Germination of Arid Plant Species,” Journal of Environmental Horticulture, vol. 31, no. 3, pp. 89-93, 2013. DOI: https://doi.org/10.24266/0738-2898.31.2.89

W. R. Carlile, and I. Bedford, “Plant growth in container media amended with calcined clay,” In Symposium on Horticultural Substrates and their Analysis, vol. 51, no. 1, pp. 117-132, 1987. DOI: https://doi.org/10.17660/ActaHortic.1988.221.9

A. Elgamouz, N. Tijani, I. Shehadi, K. Hasan, and M. A. F. Kawam, “Characterization of the firing behaviour of an illite-kaolinite clay mineral and its potential use as membrane support,” Heliyon, vol. 5, no. 8, p. 02281, 2019. DOI: https://doi.org/10.1016/j.heliyon.2019.e02281

T. Maharajan, S. A. Ceasar, T. P. A. Krishna, and S. Ignacimuthu, “Management of phosphorus nutrient amid climate change for sustainable agriculture,” Journal of Environmental Quality, vol. 50, no.5, pp. 1303-1324, 2021. DOI: https://doi.org/10.1002/jeq2.20292

S. Janbuala, and T. Wasanapiarnpong, “Effect of rice husk and rice husk ash on properties of lightweight clay bricks,” Key Engineering Materials, vol. 659, no. 1, pp. 74-79, 2015. DOI: https://doi.org/10.4028/www.scientific.net/KEM.659.74

S. Janbuala, U. Kitthawee, M. Eambua, and P. Laoratanakul, “Effect of rice husk ash to mechanical properties of clay bricks,” Advanced Materials Research, vol. 770, no. 1, pp. 50-53, 2013. DOI: https://doi.org/10.4028/www.scientific.net/AMR.770.50

K. G. Mansaray, and A. E. Ghaly, “Agglomeration characteristics of silica sand-rice husk ash mixtures at elevated temperatures,”

Energy Sources, vol. 20, no. 7, pp. 631-652, 1998. DOI: https://doi.org/10.1080/00908319808970083

R. Chutima, B. Dell, and S. Lumyong, “Effects of mycorrhizal fungi on symbiotic seed germination of Pecteilis susannae (L.) Rafin (Orchidaceae), a terrestrial orchid in Thailand,” Symbiosis, vol. 53, no. 3, pp. 149-156, 2011. DOI: https://doi.org/10.1007/s13199-011-0120-8

R. Chutima, and S. Lumyong, “Production of indole-3-acetic acid by Thai native orchid-associated fungi,” Symbiosis, vol. 56, no. 1, pp. 35-44, 2012. DOI: https://doi.org/10.1007/s13199-012-0158-2

M. Vosnjak, M. Likar, and G. Osterc, “The effect of mycorrhizal inoculum and phosphorus treatment on growth and flowering of ajania (Ajania pacifica (nakai) bremer et humphries) plant,” Horticulturae, vol. 7, no. 7, pp. 178-189, 2021 DOI: https://doi.org/10.3390/horticulturae7070178

R. Grabka, T. W. d’Entremont, S. J. Adams, A. K. Walker, J. B. Tanney, P. A. Abbasi, and S. Ali, “Fungal endophytes and their role in agricultural plant protection against pests and pathogens,” Plants, vol. 11, p. 384. 2022. DOI: https://doi.org/10.3390/plants11030384

S. M. Nadeem, M. Ahmad, Z. A. Zahir, A. Javaid, and M. Ashraf, “The role of mycorrhizae and plant growth promoting rhizobacteria (PGPR) in improving crop productivity under stressful environments,” Biotechnology Advances, vol. 32, pp. 429-448, 2014. DOI: https://doi.org/10.1016/j.biotechadv.2013.12.005

E. Birhane, M. Hailemariam, G. Gebresamuel, T. Araya, K. M. Hadgu, and L. Norgrove, “Source of mycorrhizal inoculum influences growth of Faidherbia albida seedlings,” Journal of Forestry Research, vol. 31, no. 1, pp. 313-323, 2020. DOI: https://doi.org/10.1007/s11676-018-0810-7

R. Chutima, H. Thurian, and O. Roongruang, “Optimum growth conditions of orchid mycorrhizal fungi for simple mycorrhizal inoculum production,” Rajabhat Journal of Sciences, Humanities & Social Sciences, vol. 19, no. 1, pp. 167-175, 2018.

J. Kumla, E. Danell, B. Bussaban, and S. Lumyong, “Suitable growth conditions and nutrition factors on in vitro culture of Phlebopus portentosus (Boletales),” Chiang Mai Journal Science, vol. 38, no. 1, pp. 156-159, 2011.

I. R. Coelho, M. V. L. Pedone-Bonfim, F. S. B. Silva, and L. C. Maia, “Optimization of the production of mycorrhizal inoculum on substrate with organic fertilizer,” Brazilian Journal of Microbiology, vol. 45, no. 4, pp. 1173-1178, 2014. DOI: https://doi.org/10.1590/S1517-83822014000400007

R. Willaert, and G. Baron, “Gel entrapment and micro-encapsulation: Methods, applications and engineering principles,” Review in Chemical Engineering, vol. 12, no. 1, p. 205, 1996. DOI: https://doi.org/10.1515/REVCE.1996.12.1-2.1

D. Berillo, A. Al-Jwaid, and J. Caplin, “Polymeric materials used for immobilisation of bacteria for the bioremediation of contaminants in water,” Polymers, vol. 13, no. 7, pp. 1073, 2021. DOI: https://doi.org/10.3390/polym13071073

T. Junsri, A. Jaiboon, K. Tanruean, P. Poolprasert, R. Sumang, R. Kodsueb, and R. Chutima, “Investigation and isolation of mycorrhizal fungi from terrestrial orchid genus Spathoglottis grown in pot,” PSRU Journal of Science and Technology, vol. 5, no. 3, pp. 127-138, 2020.

The Powder Diffraction File: A quality materials characterization database powder diffr., card no 00-001-0649.

The Powder Diffraction File: A quality materials characterization database powder diffr., card no 00-002-0527.

The Powder Diffraction File: A quality materials characterization database powder diffr., card no 00-001-0042.

A. A. M. Basma, and A. S. Dhilal, “Effect of kaolinite on the mechanical properties, thermal properties, flammability and water absorption percentage of poly (Vinyl Chloride) composite,” Iraqi Journal of Chemical and Petroleum Engineering, vol. 18, no. 2, pp. 27-39, 2017.

X. Wang, Y. Jin, Z. Wang, Y. Nie, Q. Huang, and Q. Wang, “Development of lightweight aggregate from dry sewage sludge and coal ash,” Waste Management, vol. 29, no. 4, pp. 1330-1335, 2009. DOI: https://doi.org/10.1016/j.wasman.2008.09.006

K. Y. Chiang, P. H. Chou, C. R. Hua, K. L. Chien, and C. Cheeseman, “Lightweight bricks manufactured from water treatment sludge and rice husks,” Journal of Hazardous Materials, vol. 171, pp. 76-82, 2009. DOI: https://doi.org/10.1016/j.jhazmat.2009.05.144

H. P. Shivaraju, H. Egumbo, P. Madhusudan, K. M. Anil Kumar, and G. Midhun, “Preparation of affordable and multifunctional clay-based ceramic filter matrix for treatment of drinking water,” Environmental Technology, vol. 40, no. 13, pp. 1633-1643, 2019. DOI: https://doi.org/10.1080/09593330.2018.1430853

D. D. Douds Jr, G. Nagahashi, C. Reider, and P. R. Hepperly, “Inoculation with arbuscular mycorrhizal fungi increases the yield of potatoes in a high P soil,” Biological Agriculture & Horticulture, vol. 25, no. 1, pp. 67-78, 2007. DOI: https://doi.org/10.1080/01448765.2007.10823209

S. S. Lee, M. Patahayah, W. S. Chong, and F. Lapeyrie, “Successful ectomycorrhizal inoculation of two dipterocarp species with a locally isolated fungus in Peninsular Malaysia,” Journal of Tropical Forest Science, vol. 20, no. 4, pp. 237-247, 2008.