Synthesis of CaCu3Ti4O12 utilizing eggshell waste as a calcium source: Structure, morphology, and dielectric properties
DOI:
https://doi.org/10.55713/jmmm.v32i3.1337คำสำคัญ:
CaCu3Ti4O12, dielectric constant, dielectric loss, eggshell, hydrothermal, sinteringบทคัดย่อ
Calcium copper titanate (CaCu3Ti4O12, CCTO) has been synthesized utilizing eggshell waste as a source of calcium through the hydrothermal route, followed by annealing treatment at temperatures 950°C and 1050°C. The sample with annealing temperatures of 950°C and 1050°C is named CTO-A and CCTO-B, respectively. The structure, microstructure, and dielectric properties of CCTO samples were investigated. The X-ray diffraction analysis results confirmed that the pure phase of CCTO has been successfully synthesized as identified in the diffraction pattern. The average crystallite size of CCTO is quite large due to annealing at high-temperature. The morphology of CCTO by electron microscopy investigation showed the grains tends to agglomerate as the annealing temperature increases due to the solid-state diffusion. Dielectric property investigation showed the CCTO samples have a high dielectric constant at low frequencies and decrease with increasing frequency. Sample CCTO-A annealed at 950oC has a higher dielectric constant than sample CCTO-B annealed at 1050oC, otherwise, it has a lower tangent loss than the sample CCTO-B.
Downloads
เอกสารอ้างอิง
P. Mao, J. Wang, P. Xiao, L. Zhang, F. Kang, and H. Gong, "Colossal dielectric response and relaxation behavior in novel system of Zr4+ and Nb5+ Co-substituted CaCu3Ti4O12 Ceramics," Ceramics International, vol. 47, no. 1, pp. 111-120, 2021. DOI: https://doi.org/10.1016/j.ceramint.2020.08.113
U. M. Meshiya, P. Y. Raval, N. P. Josh, N. H. Vasoya, P. K. Jha, and K. B. Modi, "Probing fano resonance, relaxor ferroelectricity, light scattering by orbital exchange-bond, orbitons by raman spectroscopy, and their correlation with dielectric properties of pure and Fe3+–substituted calcium-copper-titanate," Vibrational Spectroscopy, vol. 112, p. 103201, 2021. DOI: https://doi.org/10.1016/j.vibspec.2020.103201
G. Miao, M. Yin, P. Li, J. Hao, W. Li, J. Du, G. Li, C. Wang, and P. Fu, "Effect of Cr Addition on the Structure and Electrical Properties of CaCu3Ti4O12 NTC Thermistor," Journal of Alloys and Compounds, vol. 884, p. 161066, 2021. DOI: https://doi.org/10.1016/j.jallcom.2021.161066
H. Moreno, H. Moreno, J. A. Cortes, F. M. Praxedes, S. M. Freitas, M. V. S. Rezende, A. Z. Simoes, V. C. Teixeira, and M. A. Ramirez, "Tunable photoluminescence of CaCu3Ti4O12 based ceramics modified with tungsten," Journal of Alloys and Compounds, vol. 850, p. 156652, 2021. DOI: https://doi.org/10.1016/j.jallcom.2020.156652
J-W. Lee and J-H. Koh, "Enhanced dielectric properties of Ag-doped CCTO ceramics for energy storage devices," Ceramics International, vol. 43, pp. 9493-9497, 2017. DOI: https://doi.org/10.1016/j.ceramint.2017.04.130
V. S Puli, S. Adireddy, M. Kothakonda, R. Elupula, and D. B. Chrisey, "Low temperature annealed giant dielectric permittivity CaCu3Ti4O12 sol-gel synthesized nanoparticle capacitors," Journal of Advanced Dielectrics, vol. 07, p. 1750017, 2017. DOI: https://doi.org/10.1142/S2010135X17500175
R. Parra, R. Savu, L. A. Ramajo, M. A. Ponce, J. A. Varela, M. S. Castro, P. R. Bueno, and E. Joanni, "Sol–Gel synthesis of mesoporous CaCu3Ti4O12 thin films and their gas sensing response," Journal of Solid State Chemistry, vol. 183, pp. 1209-1214, 2010. DOI: https://doi.org/10.1016/j.jssc.2010.03.033
Y-S. Shen, C-C. Ho, and B-S. Chiou, "Impedance spectroscopy of CaCu3Ti4O12 films showing resistive switching," Journal of Electrochemical Society, vol. 156, p. H466, 2009. DOI: https://doi.org/10.1149/1.3111882
L. C. Kretly, A. F. L. Almeida, P. B. A. Fechine, R. S. de Oliveira, and A. S. B. Sombra, "Dielectric permittivity and loss of CaCu3Ti4O12 (CCTO) substrates for microwave devices and antennas," Journal of Materials Science: Materials in Electronics, vol. 15, pp. 657-663, 2004. DOI: https://doi.org/10.1023/B:JMSE.0000038920.30408.77
H. S. Kushwaha, N. A. Madhar, B. Ilahi, P. Thomas, A. Halder, and R. Vaish, "Efficient solar energy conversion using CaCu3Ti4O12 photoanode for photocatalysis and photoelectro-catalysis," Scientific Report, vol. 6, p. 18557, 2016. DOI: https://doi.org/10.1038/srep18557
J-W. Lee, J-W. Lee, G-H. Lee, D-J. Shin, J. Kim, S-J. Jeong and J-H. Koh, "Ag-migration effects on the metastable phase in CaCu3Ti4O12 capacitors," Scientific Report, vol. 8, p. 1392, 2018. DOI: https://doi.org/10.1038/s41598-018-19241-0
J. A. Cortés, H. Moreno, S. Orrego, V. D. N. Bezzon, and M. A. Ramírez, “Dielectric and non-ohmic analysis of Sr2+ influences on CaCu3Ti4O12-based ceramic composites," Materials Research Bulletin, vol. 134, p. 111071, 2021. DOI: https://doi.org/10.1016/j.materresbull.2020.111071
A. A. Felix, V. D. N. Bezzon, M. O. Orlandi, D. Vengust, M. Spreitzer, E. Longo, D. Suvorov, and J. A. Varela, “Role of oxygen on the phase stability and microstructure evolution of CaCu3Ti4O12 ceramics," Journal of the European Ceramic Society, vol. 37, pp. 129-136, 2017. DOI: https://doi.org/10.1016/j.jeurceramsoc.2016.07.039
P. Liu, P. Liu, Y. Lai, Y. Zeng, S. Wu and J. Han,”Influence of annealing conditions on microstructure and electrical properties of CaCu3Ti4O12 (CCTO) ceramics," Journal of Alloys and Compounds, vol. 650, pp. 59-64, 2005. DOI: https://doi.org/10.1016/j.jallcom.2015.07.247
S. Rhouma, S. Rhouma, S. Saîd, C. Autret, S. De Almeida-Didry, M. El Amrani, and A. Megriche, "Comparative studies of pure, sr-doped, ni-doped and co-doped CaCu3Ti4O12 Ceramics: Enhancement of dielectric properties," Journal of Alloys and Compounds, vol. 717, pp. 121-126, 2017. DOI: https://doi.org/10.1016/j.jallcom.2017.05.053
J. Jumpatam, B. Putasaeng, N. Chanlek, P. Kidkhunthod, P. Thongbai, S. Maensiri, and P. Chindaprasirt, "Improved giant dielectric properties of CaCu3Ti4O12 via simultaneously tuning the electrical properties of grains and grain boundaries by F − Substitution," RSC Advances, vol. 7, pp. 4092-4101, 2017. DOI: https://doi.org/10.1039/C6RA27381E
K. Prompa, E. Swatsitang, and T. Putjuso, "Very low loss tangent and giant dielectric properties of CaCu3Ti4O12 ceramics prepared by the sol–gel process," Journal of Materials Scince: Materials in Electronics, vol. 28, pp. 15033-15042, 2017. DOI: https://doi.org/10.1007/s10854-017-7377-5
M. Chinnathambi, A. Sakthisabarimoorthi, M. Jose, and R. Robert, “Study of the electrical and dielectric behaviour of selenium doped CCTO ceramics prepared by a facile sol-gel route," Materials Chemistry and Physics, vol. 272, p. 124970, 2021. DOI: https://doi.org/10.1016/j.matchemphys.2021.124970
Y. Tian, X. Zhang, Y. Yang, Z. Liu, and X. Huang, "Sol-gel synthesis and sensing study of perovskite CaCu3Ti4O12 nano-powders," Integrated Ferroelectrics, vol. 129, pp. 188-195, 2011. DOI: https://doi.org/10.1080/10584587.2011.576948
Sonia, M. Chandrasekhar, and P. Kumar, "Microwave assisted sol-gel synthesis of high dielectric constant CCTO and BFN ceramics for MLC applications," Processing and Application of Ceramics, vol. 11, pp. 154-159, 2017. DOI: https://doi.org/10.2298/PAC1702154C
J. Boonlakhorn, J. Prachamon, J. Manyam, P. Thongbai, and P. Srepusharawoot, "Origins of a liquid-phase annealing mechanism and giant dielectric properties of Ni+Ge Co-doped CaCu3Ti4O12 ceramics," Ceramics International, vol. 47, pp. 13415-13422, 2021. DOI: https://doi.org/10.1016/j.ceramint.2021.01.199
O. Z. Yanchevskii, O. I. V’yunov, and T. O. Plutenko, "Carbonate precursor route for preparation of CaCu3Ti4O12," Ukrainian Chemistry Journal, vol. 87, pp. 47-60, 2021. DOI: https://doi.org/10.33609/2708-129X.87.07.2021.47-60
R. Kumar, M. Zulfequar and T. D. Senguttuvan, "Improved giant dielectric properties in microwave flash combustion derived and microwave annealed CaCu3Ti4O12 ceramics," Journal of Electroceramics, vol. 42, pp. 41-46, 2019. DOI: https://doi.org/10.1007/s10832-018-0145-y
H. Tang, H. Tang, Z. Zhou, C. C. Bowland and H. A. Sodano, “Synthesis of calcium copper titanate (CaCu3Ti4O12) nanowires with insulating SiO2 barrier for low loss high dielectric constant nanocomposites," Nano Energy, vol. 17, pp. 302-307, 2015. DOI: https://doi.org/10.1016/j.nanoen.2015.09.002
B. Samanta, P. Kumar, and C. Prakash, "Effect of annealing temperature and cu-rich secondary phase on dielectric properties of microwave processed CaCu3Ti4O12 ceramics," Ferroelectrics, vol. 517, pp. 46–57, 2017. DOI: https://doi.org/10.1080/00150193.2017.1369829
S. Pandey, V. Kumar, V. K. Sharma, and K. D. Mandal, "Effect of doping metal ions on microstructural evolution and dielectric behaviors of CaCu3Ti4O12 Ceramics synthesized by semi-wet route," Materials Chemistry and Physics, vol. 253, p. 123384, 2020. DOI: https://doi.org/10.1016/j.matchemphys.2020.123384
L. Lin, Y. Liu, and M. Tian, "Enhancement of Breakdown electric field and dielectric properties of CaCu3Ti4O12 ceramics by Sr doping," Materials Chemistry and Physics, vol. 244, p. 122722, 2020. DOI: https://doi.org/10.1016/j.matchemphys.2020.122722
Y. Qu, Y. Wu, G. Fan, P. Xie, Y. Liu, Z. Zhang, J. Xin, Q. Jiang, and K. Sun, “Tunable radio-frequency negative permittivity of Carbon/CaCu3Ti4O12 metacomposites," Journal of Alloys and Compounds, vol. 834, p. 155164, 2020. DOI: https://doi.org/10.1016/j.jallcom.2020.155164
G. Wu, Z. Yu, K. Sun, R. Guo, X. Jiang, C. Wu, and Z. Lan, "Effect of CaCu3Ti4O12 Dopant on the magnetic and dielectric properties of high-frequency MnZn power ferrites," Journal of Magnetism and Magnetic Materials, vol. 513, 167095, 2020. DOI: https://doi.org/10.1016/j.jmmm.2020.167095
Z. Xu, D. Wang, and Z. Zhang, "Preparation and characterization of Mg2+-doped CaCu3Ti4O12 pigment with high NIR reflectance," Ceramics International, vol. 46, pp. 25306-25312, 2020. DOI: https://doi.org/10.1016/j.ceramint.2020.06.324
X. Yue, W. Long, J. Liu, S. Pandey, S. Zhong, L. Zhang, S. Du, and D. Xu, “Enhancement of dielectric and non-ohmic properties of graded co-doped CaCu3Ti4O12 thin films," Journal of Alloys and Compounds, vol. 816, p. 152582, 2020. DOI: https://doi.org/10.1016/j.jallcom.2019.152582
H. Lin, W. Xu, H. Zhang, C. Chen, Y. Zhou, and Z. Yi, “Origin of high dielectric performance in fine grain-sized CaCu3Ti4O12 Materials," Journal of European Ceramic Society, vol. 40, pp. 1957-1966, 2020. DOI: https://doi.org/10.1016/j.jeurceramsoc.2019.12.042
S. Pongpaiboonkul, T. M. Daniels, and S. K. Hodak, "Preferentially oriented fe-doped CaCu3Ti4O12 films with high dielectric constant and low dielectric loss deposited on LaAlO3 and NdGaO3 substrates," Applied Surface Science,, vol. 540, p. 148373, 2021. DOI: https://doi.org/10.1016/j.apsusc.2020.148373
S. Li, J. Zhang, S. Jamil, Q. Cai, and S. Zang, "Conversion of eggshells into calcium titanate cuboid and its adsorption properties," Research on Chemical Intermediates, vol. 44, pp. 3933-3946, 2018. DOI: https://doi.org/10.1007/s11164-018-3332-1
A. Maddu, N. F. Wahyuni, and Irmansyah, "The Effect of annealing temperature on structure and electrical properties of CaTiO3 synthesized from Hen’s Eggshell via hydrothermal process," International Journal of Nanoelectronics and Materials, vol. 12, no. 3, pp. 257-264, 2019.
K. Maitreekeaw, and T. Chanadee, "Calcium Titanate ceramics obtained by combustion synthesis and two-step annealing," Science of Annealing, vol. 52, pp. 491-502, 2020. DOI: https://doi.org/10.2298/SOS2004491M
K. W. Goh, D-J. Lin, H-L. Lin, S-M. Haung, S-M. Liu, and W-C. Chen, " Effect of PH on the properties of eggshell-derived hydroxyapatite bioceramic synthesized by wet chemical method assisted by microwave irradiation," Ceramics International, vol. 47, pp. 8879-8887, 2021. DOI: https://doi.org/10.1016/j.ceramint.2020.12.009
A. Ashokan, A. Ashokan, V. Rajendran, T. S. S. Kumar, and G. Jayaraman, "Eggshell derived hydroxyapatite microspheres for chromatographic applications by a novel dissolution - precipitation method," Ceramics International, vol. 47, pp. 18575-18583, 2021. DOI: https://doi.org/10.1016/j.ceramint.2021.03.183
D. Muthu, G. S. Kumar, V. S. Kattimani, V. Viswabaskaran, and E. K. Girija, "Optimization of a lab scale and pilot scale conversion of eggshell biowaste into hydroxyapatite using microwave reactor," Ceramics Interntional, vol. 46, pp. 25024-25034, 2020. DOI: https://doi.org/10.1016/j.ceramint.2020.06.288
S. Cherdchom, T. Rattanaphan, and T. Chanadee, "Calcium titanate from food waste: combustion synthesis, annealing, characterization, and properties," Advances in Materials Science and Engineering, vol. 2019. DOI: https://doi.org/10.1155/2019/9639016
D. P. Samarakoon, and R. N. Singh, "Thickness dependent dielectric properties of calcium copper titanate ceramics measured in a controlled atmosphere," Ceramics International, vol. 45, pp. 16554-16563, 2019. DOI: https://doi.org/10.1016/j.ceramint.2019.05.192
Y. Li, W. Li, G. Du, and N. Chen, “Low Temperature preparation of CaCu3Ti4O12 ceramics with high permittivity and low dielectric loss," Ceramics International, vol. 43, pp. 9178-9183, 2017. DOI: https://doi.org/10.1016/j.ceramint.2017.04.069
D. S. Tsai, D. S. Tsai, T. S. Chin, S. E. Hsu, and M. P. Hung, "A simple method for the determination of lattice parameters from powder x-ray diffraction data," Materials Transactions, JIM, vol. 30, no. 7, pp. 474-479, 1989. DOI: https://doi.org/10.2320/matertrans1989.30.474
S. Jesurani, S. Kanagesan, and T. Kalaivani, "Phase formation and high dielectric constant of calcium copper titanate using sol-gel route," Journal of Materials Science: Materials in Electronics, vol. 23, pp. 668-674, 2021. DOI: https://doi.org/10.1007/s10854-011-0468-9
S. F. Shao, J. L. Zhang, P. Zheng, W. L. Zhong, and C. L. Wang, "Microstructure and electrical properties of CaCu3Ti4O12 ceramics," Journal of Applied Physisics, vol. 99, p. 084106, 2006. DOI: https://doi.org/10.1063/1.2191447
J. Mohammed, T. T. C. Trudel, H. Y. Hafeez, B. I. Adamu, Y. S. Wudil, Z. I. Takai, S. K. Godara, and A. K. Srivastavaa, "Tuning the dielectric and optical properties of Pr Co–substituted calcium copper titanate for electronics applications," Journal of Physics and Chemistry of Solids, vol. 126, pp. 85-92, 2019. DOI: https://doi.org/10.1016/j.jpcs.2018.09.034
X. Li, J. Wang, H. Chen, C. Xiong, Z. Shi, and Q. Yang, "Flexible dielectric nanocomposite films based on Chitin/ Boron Nitride/Copper calcium titanate with high energy density," Composites Part A, Applied Science and Manufacturing, vol. 149, p. 106554, 2021. DOI: https://doi.org/10.1016/j.compositesa.2021.106554
B. S. Prakash, and K. B. R. Varma, "Influence of annealing conditions and doping on the dielectric relaxation originating from the surface layer effects in CaCu3Ti4O12 ceramics," Journal of Physics and Chemistry of Solids, vol. 68, pp. 490-502, 2007. DOI: https://doi.org/10.1016/j.jpcs.2007.01.006
P. Thongbai, Y. Teerapon, M. Santi, A. Vittaya, C. Prinya, and D. Damjanovic, “Improved dielectric and nonlinear electrical properties of fine-grained CaCu3Ti4O12 ceramics prepared by a glycine-nitrate process," Journal of the American Ceramics Society, vol. 97, no. 6, pp. 1785-1790, 2014. DOI: https://doi.org/10.1111/jace.12812
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2022 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
