Mechanical properties of interpenetrating phase composites using open-cell Al foams with natural rubber and polyethylene

ผู้แต่ง

  • Kunmutta Angamnuaysiri Faculty of Engineering, Chulalongkorn University
  • Seksak Asavavisithchai Faculty of Engineering, Chulalongkorn University

คำสำคัญ:

Interpenetrating phase composite, Aluminium foam, Microstructure, Mechanical properties

บทคัดย่อ

Interpenetrating phase composites (IPCs) were produced by conventional casting process, in vacuum atmosphere, using open-cell Al foams as matrix, and filled with either natural rubber or polyethylene. Mechanical properties of IPCs strongly depends on types of polymeric phases. It is found that the IPCs with polyethylene show an increase in compressive strength as well as failure strain. However, a large decrease of compressive strength is observed in the IPCs with natural rubber, as a result of cracks along the interface between Al foam and the rubber. These cracks are distributed throughout foam structure in the IPCs.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Gibson, L.J., Ashby, M.F. (1997). Cellular Solids : Structure and Properties. 2nd ed. Cambridge University Press, Cambridge : UK.

Ashby, M.F., Evans, A.G., Fleck, N.A., Gibson, L.J., Hutchinson, J.W. and Wadley, H.N.G. (2000). Metal Foams : A Design Guide. ButterworthHeinemann, Boston.

Brothers, A.H., Scheunemann, R., DeFouw, J.D. and Dunand, D.C. (2005). Processing and structure of open-celled amorphous metal foams. Scr. Mater. 52 : 335-339.

Pollien, A., Conde, Y., Pambaguian, L. and Mortensen, A. (2005). Graded open-cell aluminium foam core sandwich beams. Mat. Sci. Eng. A. 404 : 9-18.

Simone, A. E and Gibson, L. J. (1998). Aluminium foam produce by liquid-state processes. Acta Mater. 46 : 3109-3123.

Boomsma, K., Poulikakos, D. and Zwick, F. (2003). Metal foams as compact high performance heat exchangers. Mech. Mater. 35 : 1161-1176.

Brothers, A.H. and Dunand, D.C. (2006). Density-graded cellular aluminum. Adv. Eng. Mater.

: 805-809. 8. Andrews, E. W., Gioux, G., Onck, P., and Gibson, L.J. (2001). Size effects in ductile cellular solids. Part II : experimental results. Int. J. Mech. Sci. 43(3) : 701-713.

Karsten S. (2008). Aluminum foam-polymer hybrid structures (APM aluminum foam) in compression testing. Int. J. Solids Struct 45 : 5627-5641.

Dukhan, N., Rayess, N. and Hadley, J. (2010). Characterization of aluminum foam-polypropylene interpenetrating phase composites: Flexural test results. Mechanics of Materials. 42 : 134-141.

Kishimoto, S., Wang, Q., Tanaka, Y., Kagawa, Y. (2014). Compressive mechanical properties of closed - cell aluminum foam - polymer composites. Compos. B Eng. 64 : 43-49.

Liu, Y. and Gong, A. (2006). Compressive Behavior and Energy Absorption of Metal Porous Polymer Composite with Interpenetrating Network Structure. Trans. Nonferrous Met. Soc. China. 16 : 439-443.

Yuan, Z., Rayess, N. and Dukhan, N. (2014). Modeling of the mechanical properties of a polymer-metal foam hybrid. Procedia Materials Science. 4 : 215-219.

Jhave, R. and Tippur, H. V. (2009). Processing, compression response and finite element modeling of syntactic foam based interpenetrating phase composite. Mater. Sci. Eng. A. 499 : 507-517.

Irene, Eugene A. (2005). Electronic Materials Science. John Wiley& sons, New Jersey.

Cverna, F. (2002). Thermal Properties of Metals. ASM Materials Data Series Prepared under the direction of the ASM International Materials Properties Database Committee,.

Tripathi, D. and Dey, T. K. (2013). Thermal conductivity, coefficient of linear thermal expansion and mechanical properties of LDPE/Ni composites. Indian J. Phys. 87(5) : 435-445.

ดาวน์โหลด

เผยแพร่แล้ว

2015-12-30

วิธีการอ้างอิง

[1]
K. Angamnuaysiri และ S. Asavavisithchai, “Mechanical properties of interpenetrating phase composites using open-cell Al foams with natural rubber and polyethylene”, J Met Mater Miner, ปี 25, ฉบับที่ 2, ธ.ค. 2015.

ฉบับ

ปีที่ 25 ฉบับที่ 2 (2015)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2016 วารสารโลหะ, วัสดุ และแร่

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.