The influence of water-cement ratios and alumino-silicate based accelerator on the properties of fiber-reinforced cement composites

Parinya CHAKARTNARODOM; Passakorn  SONPRASARN; Sureerat  POLSILAPA; Nuntaporn  KONGKAJUN; Edward  LAITILA; Wichit  PRAKAYPAN

doi:10.55713/jmmm.v33i2.1633

ผู้แต่ง

Parinya CHAKARTNARODOM Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Chatuchak, Bangkok, 10900, Thailand https://orcid.org/0000-0002-4873-7285
Passakorn SONPRASARN Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Chatuchak, Bangkok, 10900, Thailand https://orcid.org/0000-0002-7271-7727
Sureerat POLSILAPA Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Chatuchak, Bangkok, 10900, Thailand https://orcid.org/0000-0003-2376-732X
Nuntaporn KONGKAJUN Department of Materials and Textile Technology, Faculty of Science and Technology, Thammasat University, Klong Luang, Pathumthani 12121, Thailand
Edward LAITILA Department of Materials Science and Engineering, Michigan Technological University, Houghton, MI 49931, USA https://orcid.org/0000-0003-4868-9305
Wichit PRAKAYPAN Source Runner Enterprise Company Limited, Bangkhen, Bangkok, 10220, Thailand https://orcid.org/0000-0002-4904-1992

DOI:

https://doi.org/10.55713/jmmm.v33i2.1633

คำสำคัญ:

fiber cement, air curing, autoclave curing, chemical admixture, water-cement ratio

บทคัดย่อ

Due to more strict environmental protection and greenhouse gas reduction, it is very important for all industries to appropriately manage their energy consumption. Fiber- reinforced cement composites are the popular building materials which consume enormous energy to intensify its chemical reaction during the autoclave steam curing process. Utilization of chemical admixture to replace the conventional energy-driven autoclave steam curing process will support the fiber- reinforced cement composites industry to develop sustainable building materials. In this research, typical and mechanical properties of the air-cured fiber- reinforced cement composites incorporated with alumino-silicate based accelerator were investigated. The results show an excellent correlation between the water-cement ratio of the mix design and the mechanical strength which is the optimum water-cement ratio for this FRCC are 0.53. Moreover, the properties of fiber- reinforced cement composites cured by either the autoclave steam curing process or air-curing process are comparable.

Downloads

Download data is not yet available.

ประวัติผู้แต่ง

Parinya CHAKARTNARODOM, Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Chatuchak, Bangkok, 10900, Thailand

Associate Professor

Passakorn SONPRASARN, Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Chatuchak, Bangkok, 10900, Thailand

Ph.D. student at Department of Materials Engineering, Faculty of Engineering, Kasetsart University

Sureerat POLSILAPA, Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Chatuchak, Bangkok, 10900, Thailand

Assoc. Prof.

Head of Department

เอกสารอ้างอิง

P. S. Intelligence. "Fiber cement market report: By raw material (portland cement, silica, cellulosic fiber), application (siding, roofing, cladding, molding and trimming), end user (residential, non-residential) – global industry analysis and growth forecast to 2030." https://www.psmarketresearch.com/

market-analysis/fiber-cement-market (accessed May 2022).

P. Chakartnarodom, N. Kongkajun, N. Chuankrerkkul, P. Ineure, and A. W. Prakaypan, "Reducing water absorption of fiber-cement composites for exterior applications by crystal modification method," Journal of Metals, Materials and Minerals, Article vol. 29, no. 4, pp. 90-98, 2019.

P. Chakartnarodom, W. Prakaypan, P. Ineure, N. Kongkajun, and N. Chuankrerkkul. Feasibility study of using basalt fibers as the reinforcement phase in fiber-cement products, Key Engineering Materials, vol. 766 KEM, pp. 252-257, 2018.

P. Pahuswanno, P. Chakartnarodom, N. Kongkajun, and W. Prakaypan. Feasibility study of using modified recycled fiber-cement for the production of high performance fiber-cement composites, Solid State Phenomena, vol. 302 SSP, pp. 93-99, 2020.

P. Sonprasarn, P. Chakartnarodom, N. Kongkajun, and W. Prakaypan. Microstructure and mechanical performance of fiber-reinforced cement composites made with nucleating-agent activated coal-fired power plant bottom ash, Solid State Phenomena, vol. 302 SSP, pp. 85-92, 2020.

P. Chakartnarodom, W. Prakaypan, P. Ineure, N. Chuankrerkkul, E. A. Laitila, and N. Kongkajun, "Properties and performance of the basalt-fiber reinforced texture roof tiles," Case Studies in Construction Materials, vol. 13, p. e00444, 2020.

B. Kottititum, Q. T. Phung, N. Maes, W. Prakaypan, and T. Srinophakun, "Early age carbonation of fiber-cement composites under real processing conditions: A parametric investigation," Applied Sciences, vol. 8, no. 2, 2018.

P. Chakartnarodom, S. Wanpen, W. Prakaypan, E. A. Laitila, and N. Kongkajun, "Development of high-performance fiber cement: A case study in the integration of circular economy in product design," Sustainability, vol. 14, no. 19, 2022.

L. Wang, H. Q. Yang, S. H. Zhou, E. Chen, and S. W. Tang, "Hydration, mechanical property and C-S-H structure of early-strength low-heat cement-based materials," Materials Letters, vol. 217, pp. 151-154, 2018.

Z. Zhang, Y. Yan, Z. Qu, and G. Geng, "Endowing strength to calcium silicate hydrate (C-S-H) powder by high pressure mechanical compaction," Cement and Concrete Research, vol. 159, p. 106858, 2022.

X. Ma, Z. Mei, and P. Ma, "Influence of water to cement ratio on mechanical performance of concrete canvas reinforced with warp-knitted spacer fabric," Geotextiles and Geomembranes, vol. 50, no. 4, pp. 708-719, 2022.

N. P. Mailvaganam, M. R. Rixom, D. P. Manson, and C. Gonzales, (1999). Chemical Admixtures for Concrete (3rd ed.). CRC Press. https://doi.org/10.4324/9780203017241

P. Sonprasarn, W. Prakaypan, S. Polsilapa, N. Kongkajun, E. A. Laitila, N. Chuankrerkkul, and P. Chakartnarodom, "The Influence of different crystal modifiers on ultra-low embodied energy curing fiber-reinforced cement composites," Journal of Metals, Materials and Minerals, vol. 32, no. 3, pp. 93-100, 2022.

ASTM C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards, ASTM International, West Conshohocken, PA, USA, 2016.

ASTM C948-81 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete, ASTM International, West Conshohocken, PA, USA, 2016.

P. Sonprasarn, P. Chakartnarodom, N. Kongkajun, and W. Prakaypan, "Microstructure and mechanical performance of fiber-reinforced cement composites made with nucleating-agent activated coal-fired power plant bottom ash," Solid State Phenomena, vol. 302, pp. 85-92, 2020.

B. Kondraivendhan, and B. Bhattacharjee, "Strength and w/c ratio relationship of cement based materials through pore features," Materials Characterization, vol. 122, pp. 124-129, 2016.

S. B. Singh, P. Munjal, and N. Thammishetti, "Role of water/ cement ratio on strength development of cement mortar," Journal of Building Engineering, vol. 4, pp. 94-100, 2015.

Z. Lu, J. Lu, Z. Liu, Z. Sun, and D. Stephan, "Influence of water to cement ratio on the compatibility of polycarboxylate superplasticizer with Portland cement," Construction and Building Materials, vol. 341, p. 127846, 2022.

P. C. Hewlett, H. Justnes, and R. M. Edmeades, "14 - cement and concrete admixtures," in Lea's Chemistry of Cement and Concrete (Fifth Edition), P. C. Hewlett and M. Liska Eds.: Butterworth-Heinemann, 2019, pp. 641-698.

P.-C. Aïtcin, "17 - The Influence of the water/cement ratio on the sustainability of concrete," in Lea's Chemistry of Cement and Concrete (Fifth Edition), P. C. Hewlett and M. Liska Eds.: Butterworth-Heinemann, 2019, pp. 807-826.

P. Wang, L.-y.-w. Ke, H.-l. Wu, and C. K. Y. Leung, "Effects of water-to-cement ratio on the performance of concrete and embedded GFRP reinforcement," Construction and Building Materials, vol. 351, p. 128833, 2022.

Y. K. Cho, S. H. Jung, and Y. C. Choi, "Effects of chemical composition of fly ash on compressive strength of fly ash cement mortar," Construction and Building Materials, vol. 204, pp. 255-264, 2019.

P. Sonprasarn, P. Chakartnarodo, P. Ineure, and W. Prakaypan, "Effects of the chemical treatment on coal-fired bottom ash for the utilization in fiber-reinforced cement composites," Journal of Metals, Materials and Minerals, vol. 29, no. 4, 2019.

J. Du, W. Meng, K. H. Khayat, Y. Bao, P. Guo, Z. Lyu, A. A. Obeidah, H. Nassif, and H. Wang, "New development of ultra-high-performance concrete (UHPC)," Composites Part B: Engineering, vol. 224, p. 109220, 2021.