Vol. 33 No. 2 (2023): June

Published: 2023-06-27

Review Articles

  • pH-responsive polymeric nanostructures for cancer theranostics

    Devadass Jessy MERCY, Karthick HARINI, Swaminathan MADHUMITHA, Chinnadurai ANITHA, Jayakumar ISWARIYA, Koyeli GIRIGOSWAMI, Agnishwar GIRIGOSWAMI
    1-15
    DOI: https://doi.org/10.55713/jmmm.v33i2.1609

Original Research Articles

  • Adhesion of thermal oxide scale formed on silicon-containing hot-rolled steel oxidised in oxygen

    Wannapha ISSAARD, Thanasak NILSONTHI
    16-22
    DOI: https://doi.org/10.55713/jmmm.v33i2.1575

  • Investigation of oxide scale adhesion on hot-rolled steel using the tensile test and acoustic emission

    Seksan SINGTHANU, Prayoon SURIN, Manop PIPATHATTAKUL, Thanasak NILSONTHI
    23-28
    DOI: https://doi.org/10.55713/jmmm.v33i2.1579

  • Oxidation behaviour of Mn-Co spinel coating on AISI 430 ferritic stainless steel with and without Cu in Ar-CO\(_{2}\)-H\(_{2}\)O atmosphere

    Thammaporn THUBLAOR, Padungaut SRIHATHAI, Panya WIMAN, Angkana MUENGJAI, Somrerk CHANDRA-AMBHORN
    29-37
    DOI: https://doi.org/10.55713/jmmm.v33i2.1582

  • Effect of nano CdO-ZnO content on structural, thermal, optical, mechanical and electrical properties of epoxy composites

    Chaitra SRIKANTH, Gattumane Motappa MADHU
    38-52
    DOI: https://doi.org/10.55713/jmmm.v33i2.1590

  • Production of autoclaved lightweight concretes using pottery stone and bagasse ash

    Sutthima SRIPRASERTSUK, Saijit DAOSUKHO
    53-57
    DOI: https://doi.org/10.55713/jmmm.v33i2.1601

  • Synthesis of zinc oxide photocatalysts from zinc-dust waste for organic dye degradation

    Wanwalee PROMSUWAN, Pornapa SUJARIDWORAKUN, Wuttichai REAINTHIPPAYASAKUL
    58-64
    DOI: https://doi.org/10.55713/jmmm.v33i2.1608

  • Investigations of structural modifications, physical and optical properties of lead boro-tellurite glasses doped with europium trioxide for possible optical switching applications

    G. V. Jagadeesha GOWDA, G. V. Ashok REDDY, Bheemaiah ERAIAH, Chinnappa Reddy DEVARAJA
    65-74
    DOI: https://doi.org/10.55713/jmmm.v33i2.1610

  • The influence of water-cement ratios and alumino-silicate based accelerator on the properties of fiber-reinforced cement composites

    Parinya CHAKARTNARODOM, Passakorn SONPRASARN, Sureerat POLSILAPA, Nuntaporn KONGKAJUN, Edward LAITILA, Wichit PRAKAYPAN
    75-80
    DOI: https://doi.org/10.55713/jmmm.v33i2.1633

  • Paper-based colorimetric sensor for mercury ion detection using smartphone digital imaging

    Pakorn PREECHABURANA, Somsak SANGNUY, Supaluck AMLOY
    81-87
    DOI: https://doi.org/10.55713/jmmm.v33i2.1653

  • Synthesis, characterization, and application of ZIF-8 for removal of Cd, Ni, and Pb ions from aqueous solutions: Optimization of the process by Response Surface Methodology (RSM) based on Central Composite Design (CCD) technique

    Amir KHOSRAVI, Maryam RANDJBAR, Razieh HABIBPOUR
    88-102
    DOI: https://doi.org/10.55713/jmmm.v33i2.1668

  • A study of the electrical and optical properties of AZO thin film by controlling pulse frequency of HiPIMS

    Peerapong NUCHUAY, Chinoros LAONGWAN, Wimol PROMCHAM, Pacharamon SOMBOONSAKSRI, Sukon KALASUNG, Chanunthorn CHANANONNAWATHORN, Pitak EIAMCHAI, Viyapol PATTHANASETTAKUL, Chamnan PROMJANTUK, Kittikhun SEAWSAKUL, Noppadon NUNTAWONG, Mati HORPRATHUMB, Saksorn LIMWICHEAN
    103-107
    DOI: https://doi.org/10.55713/jmmm.v33i2.1696

  • Green production of simultaneous coloration and functional finishing on hemp textiles through dyeing with Diospyros mollis Griff. extract

    Pisutsaran CHITICHOTPANYA, Nattaya VUTHIGANOND, Pimnara CHUTASEN, Thitirat INPRASIT
    108-119
    DOI: https://doi.org/10.55713/jmmm.v33i2.1697

  • Ballistic performance of composite armor impacted by 7.62 mm armor projectile

    Apichart JINNAPAT, Patchayapon DOUNGKOM, Kritkeaw SOMTON, Kannigar DATERAKSA
    120-127
    DOI: https://doi.org/10.55713/jmmm.v33i2.1698

  • Feasibility study of coconut shell biochar production using community-scale biochar kiln

    Uraiwan PONGSA, Pasuree LUMSAKUL, Orajit JAMESANG, Prasan SAENGKHIAO, Phoometh SANGRAYUB, Wichai PUMCHAN
    128-138
    DOI: https://doi.org/10.55713/jmmm.v33i2.1699

  • Physico-chemical characterization of snail shells powder prepared by mechanochemical processes and thermal treatment

    Mostapha KARAOUI, Rachid HSISSOU, Mohammed ALAMI, Mohammed ASSOUAG
    139-147
    DOI: https://doi.org/10.55713/jmmm.v33i2.1700

  • Dielectric Properties and Electrochemical behavior of Graphene Oxide derived from Myanmar Coal Minerals

    Min Maung MAUNG, Chan Nyein AUNG, Gasidit PANOMSUWAN, Khin Khin WIN
    148-155
    DOI: https://doi.org/10.55713/jmmm.v33i2.1705

  • Recycling of iron oxide waste by carbothermic reduction to utilize in FDM 3D printing materials

    Korbkaroon DOUNGKEAW, Peeraphat SUTTIPONG, Phachai KUNGWANKRAI, Suksan MUENGTO, Boonlom THAVORNYUTIKARN, Jennarong TUNGTRONGPAIROJ
    156-161
    DOI: https://doi.org/10.55713/jmmm.v33i2.1584