Mechanical behavior and physicochemical modifications in lignosulfonate-treated fique (Furcraea Andina) fibers

Beatriz Dantas Lourenço da  SILVA; Paula Lage  AGRIZE; Betina Carvalho  VEIGA; Lucio Fabio Cassiano  NASCIMENTO; Camila Aparecida Abelha  ROCHA; Fábio de Oliveira  BRAGA

doi:10.55713/jmmm.v33i1.1651

ผู้แต่ง

Beatriz Dantas Lourenço da SILVA Universidade Federal Fluminense (UFF) / Department of Civil Engineering, Rua Passo da Pátria 156, Bloco D, 4º andar, Niterói, Rio de Janeiro, 24210-240, Brazil
Paula Lage AGRIZE Universidade Federal Fluminense (UFF) / Department of Civil Engineering, Rua Passo da Pátria 156, Bloco D, 4º andar, Niterói, Rio de Janeiro, 24210-240, Brazil
Betina Carvalho VEIGA Universidade Federal Fluminense (UFF) / Department of Civil Engineering, Rua Passo da Pátria 156, Bloco D, 4º andar, Niterói, Rio de Janeiro, 24210-240, Brazil
Lucio Fabio Cassiano NASCIMENTO Instituto Militar de Engenharia (IME) / Department of Materials Science, Praça General Tibúrcio 80, Urca, Rio de Janeiro, 22290-270, Brazil
Camila Aparecida Abelha ROCHA Universidade Federal Fluminense (UFF) / Department of Civil Engineering, Rua Passo da Pátria 156, Bloco D, 4º andar, Niterói, Rio de Janeiro, 24210-240, Brazil
Fábio de Oliveira BRAGA Universidade Federal Fluminense (UFF) / Department of Civil Engineering, Rua Passo da Pátria 156, Bloco D, 4º andar, Niterói, Rio de Janeiro, 24210-240, Brazil

DOI:

https://doi.org/10.55713/jmmm.v33i1.1651

คำสำคัญ:

Natural lignocellulosic fiber, surface treatment, Physical properties, Mechanical properties, Microstructure

บทคัดย่อ

One of the most frequent problems in biocomposites is the physical/chemical incompatibility between natural lignocellulosic fibers (NLF) and the matrix. Physical and/or chemical treatments are the most common approach to improve interface properties. Seeking for environmentally friendly treatments, lignosulfonates (LSs) have been considered for surface modification of NLF due to their amphiphilic properties. Thus, the objective of the present work is to evaluate the influence of sodium LS (SLS) treatment protocols in the properties and mechanical behavior of fique (Furcraea Andina) fibers. X-ray diffraction (XRD), Thermogravimetric (TGA) and spectroscopic (FTIR) analyzes were performed, as well as optical microscopy, scanning electron microscopy (SEM), fiber-diameter measurements and tensile tests. The results showed efficient surface cleaning from extractives and absorption of saline and aromatic components from SLS. Partial removal of lignin and hemicellulose was observed as well, manifested by an increasing in fiber crystallinity, decreasing in the intensity of the characteristic bands of C=O (acetyl and ester) and p-hydroxy-phenyl, and displacement in the temperature of cellulose pyrolysis to lower temperatures. These phenomena were stronger in the fibers with longer exposures to SLS. The SLS treatment protocols produce a narrower strength distribution, improving the reliability of the fibers relative to its mechanical behavior.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

T. Vaisanen, O. Das, and L. Tomppo, "A review on new bio-based constituents for natural fiber-polymer composites," Journal of Cleaner Production, vol. 149, pp. 582-596, 2017.

A. Lotfi, H. Li, D. V. Dao, and G. Prusty, "Natural fiber-reinforced composites: A review on material, manufacturing, and machinability," Journal of Thermoplastic Composite Materials, vol. 34, no. 2, pp. 238-284, 2019.

M. Zwawi, "A Review on natural fiber bio-composites, surface modifications and applications," Molecules, vol. 26, pp. 404-431, 2021.

S. K. Ramamoorthy, M. Skrifvars, and A. Persson, "A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers," Polymer Reviews, vol. 55, pp. 107-162, 2015.

O. Faruk, A. K. Bledzki, H-S. Fink, and M. Sain, "Progress report on natural fiber reinforced composites", Macromolecular Materials and Engineering, vol. 299, pp. 9-26, 2014.

O. Faruk, A. K. Bledzki, H-S. Fink, and M. Sain, "Bio-composites reinforced with natural fibers: 2000-2010," Progress in Polymer Science, vol. 37, pp.1552-1596, 2012.

R. S. Castoldi, L. M. S. Souza, and F. A. Silva, "Comparative study on the mechanical behavior and durability of polypropylene and sisal fiber reinforced concretes," Construction and Building Materials, vol. 211, pp. 617-628, 2019.

F. Pacheco-Torgal, and S. Jalali, "Cementitious building materials reinforced with vegetal fibers: A review," Construction and Building Materials, vol. 25, pp. 575-581, 2011.

R. P. Fonseca, J. C. Rocha, and M. Cheriah, "Mechanical properties of mortars reinforced with amazon rainforest natural fibers", Materials, vol. 14, pp. 155-173, 2021.

P. F. P. Ferraz, R. F. Mendes, D. B. Marin, J. L. Paes, D. Cecchin, and M. Barbari, "Agricultural residues of lignocellulosic materials in cement composites," Applied Sciences, vol. 10, pp. 8019-8036, 2020.

A. Jesudass, V. Gayathri, R. Geethan, M. Gobirajan, and M. Venkatesh, "Earthen blocks with natural fibres - A review," Materials Today: Proceedings, vol. 45, no. 7, pp. 6979-6986, 2021.

S. V. Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, "Are natural fiber composites environmentally superior to glass fiber reinforced composites?," Composites Part A: Applied Science and Manufacturing, vol. 35, pp. 371-376, 2004.

P. Gañán, and I. Mondragon, "Surface modification of fique fibers: Effects of their physico-mechanical properties," Polymer Composites, vol. 23, no. 3, pp: 383-394, 2002.

K. G. Bastidas, M. F. R. Pereira, C. A. Sierra, and H. R. Zea, "Study and characterization of the lignocellulosic Fique (Furcraea Andina spp.) fiber," Cellulose, vol. 29, pp. 2187-2198, 2022.

M. C. A. Teles, G. R. Altoé, P. A. Netto, H. A. Colorado, F. M. Margem, and S. N. Monteiro, "Fique fiber tensile elastic modulus dependence with diameter using the Weibull statistical analysis," Materials Research, vol. 18 (Suppl. 2), pp. 193-199, 2015.

A. S. Ovalle-Serrano, C. Blanco-Tirado, and M. Y. Combariza, "Exploring the composition of raw and delignified Colombian fique fibers, tow and pulp," Cellulose, vol. 25, pp. 151-165, 2018.

S. N. Monteiro, F. S. Assis, C. L. Ferreira, N. T. Simonassi, R. P. Weber, M. S. Oliveira, H. A. Colorado, and A. C. Pereira, "Fique fabric: A promising reinforcement for Polymer composites," Polymers, vol. 10, pp. 246-255, 2018.

S. Gómez-Suarez, and E. Córdoba-Tuta, "Composite materials reinforced with fique fibers – A review," Revista UIS Ingenierías, vol. 21, no. 1, pp. 163-178, 2022.

D. Verma, and S. Jain, "Effect of natural fibers surface treatment and their reinforcement in thermo-plastic polymer composites: a review," Current Organic Synthesis, vol. 14, no. 2, pp. 186-199, 2017.

R. Ahmad, R. Hamid, and S. A. Osman, "Physical and chemical modifications of plant fibres for reinforcement in cementitious composites. advances in civil engineering," Advances in Civil Engineering, vol. 2019, 2019

S. R. Ferreira, F. A. Silva, P. R. L. Lima, and R. D. Toledo Filho, "Effect of hornification on the structure, tensile behavior and fiber matrix bond of sisal, jute and curauá fiber cement based composite system," Construction and Building Materials, vol. 139, pp. 551-561, 2017.

S. R. Ferreira, F. A. Silva, P. R. L. Lima, and R. D. Toledo Filho, "Effect of fiber treatments on the sisal fiber properties and fiber–matrix bond in cement based systems," Construction and Building Materials, vol. 101, pp. 730-740, 2015.

S. Jose, S. Thomas, K. P. Jibin, K. S. Sisanth, V. Kadam, and D. B. Shakyawar, "Surface modification of wool fabric using sodium lignosulfonate and subsequent improvement in the interfacial adhesion of natural rubber latex in the wool/rubber composites," Industrial Crops & Products, vol. 177, p. 114489, 2022.

F. Oliveira, C. G. Silva, L. A. Ramos, and E. Frollini, "Phenolic and lignosulfonate-based matrices reinforced with untreated and lignosulfonate-treated sisal fibers," Industrial Crops & Products, vol. 96, pp. 30-41, 2017.

S. L. Gualberto, L. A. C. Motta, and D. Pasquini. "Treatment of sisal fibers with lignosulphonate to improve the properties of fiber cement composites" (in Portuguese), Revista Virtual de Química, vol. 13, no. 6, pp. 1257-1267, 2021.

J. Ruwoldt, "A critical review of the physicochemical properties of lignosulfonates: chemical structure and behavior in aqueous solution, at surfaces and interfaces. Surfaces," Surfaces, vol. 3, pp. 622-648, 2020.

S. Park, J. O. Baker, M. E. Himmel, P. A. Parilla, and D. K. Johnson, "Cellulose crystallinity index: Measurement techniques and their impact on interpreting cellulase performance," Biotechnology for Biofuels, vol. 3, pp. 10-19, 2010.

L. Segal, J. J. Creely, A. E. Martin Jr., and C. M. Conrad, "An empirical method for estimating the degree of crystallinity of native cellulose using the X-Ray diffractometer," Textile Research Journal, vol. 29, pp. 786-794, 1962.

Standard guide for forensic analysis of fibers by infrared spectroscopy, ASTM E2224-19, ASTM International, West Conshohocken, PA, 2019.

Standard test method for thermal stability by thermogravimetry, ASTM E2550-21, ASTM International, West Conshohocken, PA, 2021.

Standard test method for tensile strength and Young’s modulus of Fibers, ASTM C1557-20, ASTM International, West Conshohocken, PA, 2020.

P. D. T. O’Connor, and A. Kleyner, Practical reliability engineering, West Sussex: John Wiley & Sons, 2012.

F. Nindiyasari, E. Griesshaber, T. Zimmermann, A. P. Manian, C. Randow, R. Zehbe, L. Fernandez-Diaz, A. Ziegler, C. Fleck, and W. W. Schmahl, "Characterization and mechanical properties investigation of the cellulose/gypsum composite," Journal of Composite Materials, vol. 50, no. 5, pp. 657-672, 2015.

S. Kim, C. Silva, A. Zille, C. Lopez, D. V. Evtuguin, and A. Cavaco-Paulo, "Characterisation of enzymatically oxidized lignosulfonates and their application on lignocellulosic fabrics," Polymer International, vol. 58, pp. 863-868, 2009.

V. S. Sreenivasan, S. Somasundaram, D. Ravindran, V. Manikandan, and R. Narayanasamy, "Microstructural, physico-chemical and mechanical characterisation of Sansevieria cylindrica fibres – An exploratory investigation," Materials and Design, vol. 32, pp. 453-461, 2011.

S. G. Jebadurai, R. Edwin Raj, V .S. Sreenivasan, and J. S. Binoj, "Comprehensive characterization of natural cellulosic fiber from Coccinia grandis stem," Carbohydrate Polymers, vol. 207, pp. 675-683, 2019.

N. V. V. Aguiar, R. M. Vieira, A. P. Matos, and M. R. Forim, "Extraction and characterization of lignin from corn straw (Zea mays L.)," (in Portuguese), Revista Virtual de Química, vol. 12, no. 6, pp. 1441-1452, 2020.

S. N. Monteiro, F. P. D. Lopes, A. P. Barbosa, A. B. Bevitori, I. L. A. Silva, and L. L. Costa, "Natural lignocellulosic fibers as Engineering Materials – An Overview,” Metallurgical and Materials Transactions A, vol. 42A, pp. 2963-2974, 2011.