Vol. 33 No. 1 (2023): March

Published: 2023-03-28

Original Research Articles

  • Wear behavior of in-situ oxide dispersion strengthened Fe-8Ni alloy with Zr additions

    Mustafa Tekin, Faiz Muhaffel, Hasan Kotan, Murat Baydoğan
    1-7
    DOI: https://doi.org/10.55713/jmmm.v33i1.1568
  • The high temperature degradation of ferritic stainless steel in solid carbon atmospheres

    Prakeaw NGAMSRI, Suwijak POKWITIDKUL, Paweena TREEWIRIYAKITJA, Penpisuth THONGYOUG, Ratchapon NILPRAPA, Jennarong TUNGTRONGPAIROJ
    8-13
    DOI: https://doi.org/10.55713/jmmm.v33i1.1574
  • Recovery of pure silver from spent silver electroplating solutions via electrochemical process and zinc cementation

    Tapany PATCHARAWIT, Chatisa KANSOMKET, Woranittha KRITSARIKUN, Ketmanee TASEELA, Chonthicha PAERNAPHAN, Thiwavan LAPHOSIN, Teerawut TANNUKIT, Sakhob KHUMKOA
    14-20
    DOI: https://doi.org/10.55713/jmmm.v33i1.1576
  • Examination of the adhesion of the scale formed on hot-rolled steel with different silicon content using a tensile test

    Seksan SINGTHANU, Prayoon SURIN, Thanasak NILSONTHI, Manop PIPATTHATTAKUL
    21-26
    DOI: https://doi.org/10.55713/jmmm.v33i1.1577
  • Corrosion of a spark plasma sintered Fe-Cr-Mo-B-C alloy in 3.5% NaCl solution

    Mudassir FAROOQ, Sohail MUHAMMAD, A. A. SOROUR
    27-38
    DOI: https://doi.org/10.55713/jmmm.v33i1.1588
  • Effects of Indium and Gallium ratio on tarnish resistance, corrosion and mechanical properties of 950 silver alloy

    Aumphol YANIL, Patama VISUTTIPITUKUL, Ekasit NISARATANAPORN, Charasphat PREUKSARATTANAWUT
    39-46
    DOI: https://doi.org/10.55713/jmmm.v33i1.1589
  • Synthesis of zircon pigments from rice husk ash and their performance in ceramic glaze

    Niti YONGVANICH, Peerapat SOYSOM, Worachet RATKASEMSAK
    47-55
    DOI: https://doi.org/10.55713/jmmm.v33i1.1593
  • Investigation of surface hardness and roughness on formability of aluminum alloy sheet AA2024-T3 subjected to the shot peening process by silica shots

    Jurarat SAWANGPAN, Sansot PANICH, Tanakorn JANTARASRICHA, Anak KHANTACHAWANA
    56-64
    DOI: https://doi.org/10.55713/jmmm.v33i1.1594
  • Investigating the effect of temperature and NaCl concentration on corrosion behavior using commercial food cans

    Samar S. HUSSEIN, Abeer A. RADHI, Wafaa K. MAHMOOD
    65-72
    DOI: https://doi.org/10.55713/jmmm.v33i1.1595
  • Optimized conditions for cobalt diffusion in Sri Lankan colorless topaz and coloration mechanism elucidation through spectro-chemical investigation

    Chandana. P. UDAWATTE, Sunil ABEYWEERA, L. R. K. PERERA, Sandun ILLANGASINGHE, Chirath WEERASOORIYA, Chakkaphan SUTTHIRAT, Naleen JAYASINGHE, Tilak DHARMARATNE, Saranga DIYABALANAGE
    73-81
    DOI: https://doi.org/10.55713/jmmm.v33i1.1596
  • Development of inexpensive device for methanol detection in hand sanitizer gel using manganese-doped zinc sulfide quantum dots modified by N-methylpolypyrrole

    Sophanat KHENTHAPHAK, Pakorn JULEANG, Wanida WONSAWAT, Orawon CHAILAPAKUL, Eakkasit PUNRAT
    82-88
    DOI: https://doi.org/10.55713/jmmm.v33i1.1597
  • Fabrication of glass-ceramics composite by infiltration of lithium tetraborate glass into porous magnesium aluminate spinel ceramic

    Nattawat KULRAT, Chumphol BUSABOK, Saweat INTARASIRI, Somsak DANGTIP, Wasana KHONGWONG
    89-94
    DOI: https://doi.org/10.55713/jmmm.v33i1.1614
  • Surface modification of activated carbon from sago waste

    Octolia TOGIBASA, Khaeriah DAHLAN, Yane Oktovina ANSANAY, Alda Filadelfi RUNGGAWERI, Marlifon MERANI
    95-100
    DOI: https://doi.org/10.55713/jmmm.v33i1.1616
  • Impact of microwave synthesis time on the shape of silver nanostructures and their antibacterial activity

    Nhat Hieu HOANG, Van Nghia NGUYEN, Thi Tho NGUYEN, Thi Mong Diep NGUYEN
    101-106
    DOI: https://doi.org/10.55713/jmmm.v33i1.1631
  • Mechanical behavior and physicochemical modifications in lignosulfonate-treated fique (Furcraea Andina) fibers

    Beatriz Dantas Lourenço da SILVA, Paula Lage AGRIZE, Betina Carvalho VEIGA, Lucio Fabio Cassiano NASCIMENTO, Camila Aparecida Abelha ROCHA, Fábio de Oliveira BRAGA
    107-115
    DOI: https://doi.org/10.55713/jmmm.v33i1.1651
  • Thermal and mechanical evaluation of natural fibers reinforced gypsum plaster composite

    Tugba MUTUK, Kerem ARPACIOĞLU, Sevim ALIŞIR, Gökhan DEMiR
    116-123
    DOI: https://doi.org/10.55713/jmmm.v33i1.1669