Effect of calcination frequency on the thermoelectric properties of Ti doped CuCrO\(_{2}\) by solid state method
DOI:
https://doi.org/10.55713/jmmm.v33i4.1785คำสำคัญ:
Thermoelectric material, CuCrO2, TiO2, Delafossite, solid-stateบทคัดย่อ
In this study, the influence of titanium oxide (TiO2) dopants and varying calcination processes on the thermoelectric properties of CuCrO2 was systematically explored. It was emphasized that these factors were not only affecting dislocation density but also exerting a profound influence on thermoelectric performance through the modulation of Seebeck coefficient and resistivity. The findings highlighted CrT-2, which incorporated TiO2 and underwent a two-time calcination process, as the top-performing sample in terms of power factor values, underscoring the significance of TiO2 as a dopant for enhancing thermoelectric efficiency. Conversely, Cr-4, exposed to four calcination cycles, exhibited slightly lower power factor values compared to Cr-2. Notably, CrT-4, despite containing the titanium dopant, showed the lowest power factor values, potentially due to intricate interactions between the dopant and the extended calcination process. These results underscore the intricate interplay between dopants, calcination processes, and thermoelectric performance in CuCrO2, necessitating precise optimization to achieve the desired material efficiency.
Downloads
เอกสารอ้างอิง
S. Sharma, S. Shriwastava, S. Kumar, K. Bhatt, and C. C. Tripathi, “Alternative transparent conducting electrode materials for flexible optoelectronic devices,” Opto-Electronics Review, vol. 26, no. 3, pp. 223-235, 2018
E. Estananto, L. Utari, N. L. W. Septiani, D. Bonardo, A. Nuruddin, S. Suyatman, and B. Yuliarto, “Anatase TiO2 on graphene-coated cotton flexible sensor at room temperature,” 2023, p. 050032.
R. Sitharthan, M. Ponnusamy, M. Karthikeyan, and D. S. Sundar, “Analysis on smart material suitable for autogenous micro-electronic application,” Materials Research Express, vol. 6, no. 10, p. 105709, 2019
X. Sun, Y. Wang, K. Li, J. Wang, X. Dai, D. Chong, J. Yan, and H. Wang, “Anisotropic electrical conductivity and isotropic seebeck coefficient feature induced high thermoelectric power factor > 1800 μ W m −1 K −2 in MWCNT films,” Advanced Functional Materials, vol. 32, no. 29, p. 2203080, 2022
T. N. M. Ngo, T. T. M. Palstra, and G. R. Blake, “Crystallite size dependence of thermoelectric performance of CuCrO2,” RSC Advances, vol. 6, no. 94, pp. 91171-91178, 2016
F. A. Benko, and F. P. Koffyberg, “CuCrO2 properties,” vol. 21, no. c, pp. 753-757, 1986 .
A. Liu, H. Zhu, M. Kim, J. Kim, and Y. Noh, “Engineering copper iodide (CuI) for multifunctional p‐type transparent semiconductors and conductors,” Advanced Science, vol. 8, no. 14, p. 2100546, 2021
X. Chu, J. Tao, S. Li, S. Ji, and C. Ye, “Sandwich-structured silver nanowire transparent conductive films with 3H hardness and robust flexibility for potential applications in curved touch screens,” Nanomaterials, vol. 9, no. 4, p. 557, 2019
K. Ohno, T. Okada, T. Kawashima, and K. Washio, “Effect of forming gas annealing on improvement in crystal orientation of solid-phase calcined CuCrO2 thin film,” Thin Solid Films, vol. 714, p. 138386, 2020
A. K. Keyan, C.-L. Yu,R. Rajakumaran,S. Sakthinathan, C. F. Wu, V. Sivaramakrishnan, S-M.Chen, and T-W. Chiu, “Highly sensitive and selective electrochemical detection of dopamine based on CuCrO2-TiO2 composite decorated screen-printed modified electrode,” Microchemical Journal, vol. 160, p. 105694, 2021
C.-C. Wang, C.-L. Yu, S. Sakthinathan, C.-Y. Chen, T.-W. Chiu, and Y.-S. Fu, “Preparation and characterization of CuCrO2–CeO2 nanofibers by electrospinning method,” Journal of Materials Science: Materials in Electronics, vol. 33, no. 2, pp. 1091-1100, 2022
H. Badr, I. S. El-Mahallawi, F. A. Elrefaie, and N. K. Allam, “Low-temperature thermoelectric performance of novel polyaniline/ iron oxide composites with superior Seebeck coefficient,” Applied Physics A, vol. 125, no. 8, p. 524, 2019
Z. Bai, S.-C. Chen, S-S. Lin, Q. Shi, Y-B. Lu, S-M. Song, and H. Sun, “Review in optoelectronic properties of p-type CuCrO2 transparent conductive films,” Surfaces and Interfaces, vol. 22, p. 100824, 2021
R. Manickam, J. Yesuraj, and K. Biswas, “Doped CuCrO2: A possible material for supercapacitor applications,” Materials Science in Semiconductor Processing, vol. 109, no. January, p. 104928, 2020
C.-F. Wu, T.-W. Chiu, and Q. Han, “Synthesis of CuCrO2-TiO2 composite nano powder by a self-combustion glycine nitrate process,” Ceramics International, vol. 44, pp. S76-S79, 2018
H. Sun, S.-C. Chen, P.-J. Chen, S.-L. Ou, C.-Y. Liu, and Y.-Q. Xin, “p-type conductive NiOx: Cu thin films with high carrier mobility deposited by ion beam assisted deposition,” Ceramics International, vol. 44, no. 3, pp. 3291-3296, 2018
B. Szyszka, W. Dewald, S. K. Gurram, A. Pflug, C. Schulz, M, Siemers, V. Sittinger, and S. Ulrich, “Recent developments in the field of transparent conductive oxide films for spectral selective coatings, electronics and photovoltaics,” Current Applied Physics, vol. 12, pp. S2-S11, 2012
R. Manickam, and K. Biswas, “Double doping induced power factor enhancement in CuCrO2 for high temperature thermoelectric application,” Journal of Alloys and Compounds, vol. 775, pp. 1052-1056, 2019
P. K. Jamshina Sanam, M. Shah, and P. P. Pradyumnan, “Structure induced modification on thermoelectric and optical properties by Mg doping in CuCrO2 nanocrystals,” Solid State Communications, vol. 353, p. 114855, 2022
M. Sun, J. Shu, C. Zhao, J. Wu, H. Guo, Y. Guo, X. Yin, Y. Lin, Z. Tan, M. He, and L. Wang, “Interface Modification with CuCrO2 nanocrystals for highly efficient and stable planar perovskite solar cells,” ACS Applied Materials & Interfaces, vol. 14, no. 11, pp. 13352-13360, 2022
T. Okada, S. Usui, T. Kawashima, and K. Washio, “Investigation of crystallinity, electrical conductivity, and optical transmittance of Mg-doped CuCrO2 deposited on buffer layer,” Materials Science in Semiconductor Processing, vol. 134, p. 106030, 2021
H. Pan, Y. He, and X. Zhang, “Interactions between dislocations and boundaries during deformation,” Materials, vol. 14, no. 4, p. 1012, 2021
E.-H. Lee, E.-B. Kim, M. S. Akhtar, and S. Ameen, “Delafossite CuCrO2 nanoparticles as possible electrode material for electro-chemical supercapacitor,” Ceramics International, vol. 48, no. 12, pp. 16667-16676, 2022
S. A. Khandy, and J.-D. Chai, “Strain engineering of electronic structure, phonon, and thermoelectric properties of p-type half-Heusler semiconductor,” Journal of Alloys and Compounds, vol. 850, p. 156615, 2021
V. Evang, J. Reindl, L. Schäfer, A. Rochotzki, P. Pletzer-Zelgert, M. Wuttig, and R. Mazzarello, “Thermally controlled charge‐carrier transitions in disordered PbSbTe chalcogenides,” Advanced Materials, vol. 34, no. 3, p. 2106868, 2022
S. J. Blundell, and K. M. Blundell, Concepts in thermal physics. Oxford University Press on Demand, 2010.
Y. Guo, X. He, W. Huang, and M. Wang, “Microstructure effects on effective gas diffusion coefficient of nanoporous materials,” Transport in Porous Media, vol. 126, no. 2, pp. 431-453, 2019
E. Karvannan, V. Vijay, T. S. Nivin, J. Archana, M. Navaneethan, and A. Karthigeyan, “Enhanced thermoelectric performance of iso-valent Al substituted Bi2S3 via carrier tuning and multiscale phonon scattering,” Materials Chemistry and Physics, p. 128506, 2023
M. Pandian , A. Krishnaprasanth, M. Palanisamy, G. Bangaru, R. Meena, C-. Dong, and A. Kandasami, “Effects of heavy ion irradiation on the thermoelectric properties of In2(Te1−xSex)3 Thin Films,” Nanomaterials, vol. 12, no. 21, p. 3782, 2022
P. Lin, J. Lin, S. Tung, T. Higashihara, and C. Liu, “Synergistic Interactions in sequential process doping of polymer/single‐walled carbon nanotube nanocomposites for enhanced n‐type thermoelectric performance,” Small, p. 2306166, 2023.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2023 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
