Fast microwave synthesis of high-silica natural soil based porous geopolymer
DOI:
https://doi.org/10.55713/jmmm.v34i1.1828คำสำคัญ:
Geopolymer, Soil, Porous, Microwave, Silicaบทคัดย่อ
This study describes a simple microwave process for fabricating porous geopolymer-polymer based Shirasu soil. The porous geopolymer samples were synthesized using sodium silicate (Na2SiO3) and sodium hydroxide (NaOH) solution as alkaline solution in range of 0.5 M to 9 M. After mixing process, the geopolymer slurry was heated and stimulated geopolymerization reaction by different microwave powers at 200 W, 500 W and 700 W for 30 s, 60 s, 90 s and 120 s. The influence of NaOH concentration, microwave powers and heating times on the apparent bulk density, the water adsorption was focused. Results showed that the microwave powers and heating time affected the apparent bulk density, the water adsorption, and the densification of geopolymer matrix. Higher microwave power can promote higher water adsorption related to lower apparent bulk density. Moreover, the results revealed that the porosity and the nitrogen adsorption of geopolymers at 120 s of heating time increased with an increment of the NaOH from 1 M to 4 M. On the other hand, geopolymers activated by 200 W at 30 s could not be hardened. This work provides the feasibility of porous geopolymer synthesis based natural soil.
Downloads
เอกสารอ้างอิง
M. S. Muñiz-Villarreal, A. Manzano-Ramírez, S. Sampieri-Bulbarela, J. Ramón Gasca-Tirado, J. L. Reyes-Araiza, J. C. Rubio-Ávalos, J. J. Pérez-Bueno, L. M. Apatiga, A. Zaldivar-Cadena, and V. Amigó-Borrás, “The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer,” Materials Letters, vol. 65, no. 6, pp. 995-998, 2011.
N. Ranjbar, C. Kuenzel, J. Spangenberg, and M. Mehrali, “Hardening evolution of geopolymers from setting to equilibrium: A review,” Cement and Concrete Composites, vol. 114, p. 103729, 2020.
Q. Wan, F. Rao, S. Song, R. E. García, R. M. Estrella, C. L. Pati~no, and Y. Zhang, “Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios,” Cement and Concrete Composites, vol. 79, pp. 45-52, 2017.
X. Zhao, C. Liu, L. Zuo, L. Wang, Q. Zhu, and M. Wang, “Investigation into the effect of calcium on the existence form of geopolymerized gel product of fly ash based geopolymers,” Cement and Concrete Composites, vol. 103, pp. 279-292, 2018.
R. Mohamed, R. Abd Razak, M. M. A. B. Abdullah, R. K. Shuib, Subaer, and J. Chaiprapa, “Geopolymerization of class C fly ash: Reaction kinetics, microstructure properties and compressive strength of early age,” Journal of Non-Crystalline Solids, vol. 553, no. November 2020, p. 120519, 2021.
S. Prasanphan, S. Onutai, and N. Nawaukkaratharnant, “Influence of partial replacement of calcined red clay by gypsum-bonded casting investment waste on geopolymerization reaction of red clay-based geopolymer,” Heliyon, p. 104908, 2021.
S. Onutai, S. Jiemsirilers, P. Thavorniti, and T. Kobayashi, “Fast microwave syntheses of fly ash based porous geopolymers in the presence of high alkali concentration,” Ceramics International, vol. 42, no. 8, pp. 9866-9874, 2016.
J. Sun, W. Wang, and Q. Yue, “Review on microwave-matter interaction fundamentals and efficient microwave-associated heating strategies,” Materials (Basel)., vol. 9, no. 4, 2016.
X. Guan, W. Luo, S. Liu, A. G. Hernandez, H. Do, and B. Li, “Ultra-high early strength fly ash-based geopolymer paste cured by microwave radiation,” Developments in the Built Environment, vol. 14, no. March, p. 100139, 2023.
M. S. Muñiz-Villarreal, A. Manzano-Ramírez, S. Sampieri-Bulbarela, J. Ramón Gasca-Tirado, J. L. Reyes-Araiza, J. C. Rubio-Ávalos, J. J. Pérez-Bueno, L. M. Apatiga, A. Zaldivar-Cadena, and V. Amigó-Borrás, “The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer,” Materials Letters, vol. 65, no. 6, pp. 995-998, 2011.
N. Ranjbar, C. Kuenzel, J. Spangenberg, and M. Mehrali, “Hardening evolution of geopolymers from setting to equilibrium: A review,” Cement and Concrete Composites, vol. 114, p. 103729, 2020.
Q. Wan, F. Rao, S. Song, R. E. García, R. M. Estrella, C. L. Pati~no, and Y. Zhang, “Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios,” Cement and Concrete Composites, vol. 79, pp. 45-52, 2017.
X. Zhao, C. Liu, L. Zuo, L. Wang, Q. Zhu, and M. Wang, “Investigation into the effect of calcium on the existence form of geopolymerized gel product of fly ash based geopolymers,” Cement and Concrete Composites, vol. 103, pp. 279-292, 2018.
R. Mohamed, R. Abd Razak, M. M. A. B. Abdullah, R. K. Shuib, Subaer, and J. Chaiprapa, “Geopolymerization of class C fly ash: Reaction kinetics, microstructure properties and compressive strength of early age,” Journal of Non-Crystalline Solids, vol. 553, no. November 2020, p. 120519, 2021.
S. Prasanphan, S. Onutai, and N. Nawaukkaratharnant, “Influence of partial replacement of calcined red clay by gypsum-bonded casting investment waste on geopolymerization reaction of red clay-based geopolymer,” Heliyon, p. 104908, 2021.
S. Onutai, S. Jiemsirilers, P. Thavorniti, and T. Kobayashi, “Fast microwave syntheses of fly ash based porous geopolymers in the presence of high alkali concentration,” Ceramics International, vol. 42, no. 8, pp. 9866-9874, 2016.
J. Sun, W. Wang, and Q. Yue, “Review on microwave-matter interaction fundamentals and efficient microwave-associated heating strategies,” Materials (Basel)., vol. 9, no. 4, 2016.
X. Guan, W. Luo, S. Liu, A. G. Hernandez, H. Do, and B. Li, “Ultra-high early strength fly ash-based geopolymer paste cured by microwave radiation,” Developments in the Built Environment, vol. 14, no. March, p. 100139, 2023.
P. Chindaprasirt, U. Rattanasak, and S. Taebuanhuad, “Role of microwave radiation in curing the fly ash geopolymer,” Advanced Powder Technology, vol. 24, no. 3, pp. 703-707, 2013.
H. Gao, L. Liao, Y. Liang, X. Tang, H. Liu, L. Mei, G. Lv, and L. Wang, “Improvement of durability of porous perlite geopolymer-based thermal insulation material under hot and humid environment,” Construction and Building Materials, vol. 313, no. October, p. 125417, 2021.
Y. Ettahiri, L. Bouna, J. V. Hanna, A. Benlhachemi, H. L. Pilsworth, A. Bouddouch, and B. Bakiz, “Pyrophyllite clay-derived porous geopolymers for removal of methylene blue from aqueous solutions,” Materials Chemistry and Physics, vol. 296, no. December 2022, p. 127281, 2023.
Y. Ettahiri, B. Bouargane, K. Fritah, B. Akhsassi, L. P´erez-Villarejo, A. Aziz, L. Bouna, A. Benlhachemi, and R. M. Novais, “A state-of-the-art review of recent advances in porous geopolymer: Applications in adsorption of inorganic and organic contaminants in water,” Construction and Building Materials, vol. 395, no. May, 2023.
S. Mingming, Z. Hengze, L. Ye, and Z. Lingqi, “The adsorption properties of steel slag-based porous geopolymer for Cu2+ removal,” Minerals Engineering, vol. 201, no. July, pp. 1-10, 2023.
P. He, Z. Guo, X. Zhang, T. Wang, W. Zheng, and D. Liu, “Development of sulfhydryl grafted hierarchical porous geopolymer for highly effective removal of Pb (II) from water,” Separation and Purification Technology, vol. 334, no. 13, p. 125954, 2024.
Y. Wang, L. Liu, C. Ren, J. Ma, B. Shen, P. Zhao, and Z. Zhang, “A novel amine functionalized porous geopolymer spheres from municipal solid waste incineration fly ash for CO2 capture,” Journal of Environmental Management, vol. 349, no. July 2023, p. 119540, 2024.
Q. Wang, P. Yan, J. Yang, and B. Zhang, “Influence of steel slag on mechanical properties and durability of concrete,” Construction and Building Materials, vol. 47, no. 1, pp. 1414-1420, 2013.
USDA, “Chapter 3 Engineering Classification of Earth Materials,” Part 631 National Engineering Handbook, no. January, p. 35, 2012.
A. Abed AL-Jabar, H. Al-Kaisy, and S. Ibrahim, “Investigating the effect of different parameters on physical properties of metakaolin-based geopolymers,” Journal of Engineering Technology, vol. 40, no. 12, pp. 1-10, 2022.
Y. Sun, P. Zhang, J. Hu, B. Liu, J. Yang, S. Liang, K. Xiao, and H. Hou, “A review on microwave irradiation to the properties of geopolymers: Mechanisms and challenges,” Construction and Building Materials, vol. 294, p. 123491, 2021.
N. A. Jaya, L. Yun-Ming, M. M. A. B. Abdullah, H. Cheng-Yong, and K. Hussin, “Effect of sodium hydroxide molarity on physical, mechanical and thermal conductivity of metakaolin geopolymers,” IOP Conference Series: Materials Science and Engineering, vol. 343, no. 1, 2018.
H. T. Ng, C. Y. Heah, Y. M. Liew, and M. M. A. B. Abdullah, “The effect of various molarities of NaOH solution on fly ash geopolymer paste,” AIP Conference Proceedings, vol. 2045, pp. 6-11, 2018.
J. Wang, L. Han, Z. Liu, and D. Wang, “Setting controlling of lithium slag-based geopolymer by activator and sodium tetra-borate as a retarder and its effects on mortar properties,” Cement and Concrete Composites, vol. 110, no. April, p. 103598, 2020.
M. Zerzouri, S. Alehyen, R. Hamzaoui, L. Ziyani, and A. Loukili, “Durability of Moroccan fly ash-based geopolymer binder,” Materials Letters, vol. 304, no. April, p. 130673, 2021.
A. Hajimohammadi, J. L. Provis, and J. S. J. Van Deventer, “The effect of silica availability on the mechanism of geo-polymerisation,” Cement and Concrete Research, vol. 41, no. 3, pp. 210-216, 2011.
A. R. Alvee, R. Malinda, A. M. Akbar, R. D. Ashar, C. Rahmawati, T. Alomayri, A. Raza, and F. U. A. Shaikh., “Experimental study of the mechanical properties and microstructure of geopolymer paste containing nano-silica from agricultural waste and crystalline admixtures,” Case Studies in Construction Materials, vol. 16, no. November 2021, p. e00792, 2022.
A. Karthik, K. Sudalaimani, C. T. Vijayakumar, and S. S. Saravanakumar, “Effect of bio-additives on physico-chemical properties of fly ash-ground granulated blast furnace slag based self cured geopolymer mortars,” Journal of Hazardous Materials, vol. 361, no. May 2018, pp. 56-63, 2019,.
A. A. Aliabdo, A. E. M. Abd Elmoaty, and H. A. Salem, “Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance,” Construction and Building Materials, vol. 121, pp. 694-703, 2016.
H. Wang, H. Wu, Z. Xing, R. Wang, and S. Dai, “The effect of various si/al, na/al molar ratios and free water on micro-morphology and macro-strength of metakaolin-based geopolymer,” Materials (Basel)., vol. 14, no. 14, 2021.
N. Waijarean, S. Asavapisit, K. Sombatsompop, and K. MacKenzie, “The Effect of SiO2/Al2O3 ratios on the properties of geopolymers prepared from water treatment residue (WTR) in the presence of heavy metals,” GMSARN International Journal, vol. 1, no. 1.78, p. 97, 2014.
Mustofa, and S. Pintowantoro, “The Effect of Si/Al ratio to compressive strength and water absorption of ferronickel,” International Seminar on Science and Technology, pp. 167-172, 2016.
H. Castillo, H. Collado, T. Droguett, S. Sánchez, M. Vesely, P. Garrido, and S. Palma, “Factors affecting the compressive strength of geopolymers: A review,” Minerals, vol. 11, no. 12, pp. 1-28, 2021.
M. Steveson, and K. Sagoe-Crentsil, “Relationships between composition, structure and strength of inorganic polymers : PPPart 2 Fly ash-derived inorganic polymers,” Journal of Materials Science, vol. 40, no. 16, pp. 4247-4259, 2005.
T. Kovárík, and J. Hájek, “Porous geopolymers: Processing routes and properties,” IOP Conference Series: Materials Science and Engineering, vol. 613, no. 1, 2019.
C. Bai, and P. Colombo, “High-porosity geopolymer membrane supports by peroxide route with the addition of egg white as surfactant,” Ceramics International, vol. 43, no. 2, pp. 2267-2273, 2017.
Y. G. Adewuyi, “Recent advances in fly-ash-based geopolymers: Potential on the utilization for sustainable environmental remediation,” ACS Omega, vol. 6, no. 24, pp. 15532-15542, 2021.
Z. Guo, and C. Zhou, “Recent advances in ink-based additive manufacturing for porous structures,” Additive Manufacturing, vol. 48, no. PB, p. 102405, 2021.
A. Graytee, J. G. Sanjayan, and A. Nazari, “Development of a high strength fly ash-based geopolymer in short time by using microwave curing,” Ceramics International, vol. 44, no. 7, pp. 8216-8222, 2018.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2023 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
