One-pot microwave-assisted approach of polydiacetylene/zinc oxide nanocomposite for reversible thermochromic
DOI:
https://doi.org/10.55713/jmmm.v34i2.1922คำสำคัญ:
Polydiacetylene, Zinc oxide, Microwave synthesis, Nanocompositeบทคัดย่อ
This study introduces a new technique to fabricate the reversible poly(PCDA/ZnO) nanocomposites thermochromism. Our preparation process is the solution-mixing method, which is supported by microwave synthesis time instead of ultrasonic bath or stirrer. The presence of ethanol molecules in aqueous media in the solution-mixing method induces dipolar polarization. In addition, the presence of Zn2+ leaking out of the ZnO can produce ionic polarization. These factors affect the shape of poly(PCDA/ZnO) nanocomposites based on their thermochromic properties. The optical properties of poly(PCDA/ZnO) nanocomposite were determined through UV-Vis absorption spectroscopy. The morphology of this nanocomposite was examined by scanning electron microscopy, and its crystallinity was investigated by X-ray diffraction. The inter-intrachain interaction was confirmed by infrared spectroscopy. In addition, the poly(PCDA/ZnO) nanocomposite embedding PVA was prepared. The reversible theromochromic properties of poly(PCDA/ZnO) nanocomposites demonstrated a higher color transition temperature with increasing microwave synthesis time. It is an important observation to understand the effect of microwave synthesis time on the morphology and reversible thermochromism of the poly(PCDA/ZnO) nanocomposite
Downloads
เอกสารอ้างอิง
S. Pumtang, W. Siripornnoppakhun, M. Sukwattanasinitt, and A. Ajavakom, “Solvent colorimetric paper-based polydiacetylene sensors from diacetylene lipids,” Journal of Colloid and Interface Science, vol. 364, no. 2, pp. 366-372, 2011. DOI: https://doi.org/10.1016/j.jcis.2011.08.074
S. Toommee, R. Traiphol, and N. Traiphol, “High color stability and reversible thermochromism of polydiacetylene/zinc oxide nanocomposite in various organic solvents and polymer matrices,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 468, pp. 252-261, 2015. DOI: https://doi.org/10.1016/j.colsurfa.2014.12.055
D. H. Park, J. M. Heo, W. Jeong, Y. H. Yoo, B. J. Park, and J. M. Kim, “Smartphone-Based VOC sensor using colorimetric polydiacetylenes,” ACS Applied Materials & Interfaces, vol. 10, no. 5, pp. 5014-5021, 2018. DOI: https://doi.org/10.1021/acsami.7b18121
S. Kingchok, J. Siriboon, L. Sun, T. A. P. Seery, N. Traiphol, and R. Traiphol, “Polydiacetylene-NA+ nanoribbons for naked eye detection of hydrogen chloride gas,” ACS Applied Nano Materials, vol. 5, no. 3, pp. 4146-4156, 2022.
Z. Zhang, J. Li, F. Wang, W. Tingwen, Y. Chen, J. Qiang, T. Xiao, and X. Chen, “A polydiacetylenes-based sensor for the efficient detection of phospholipase D activity,” Sensors and Actuators B: Chemical, vol. 282, pp. 636-643, 2019. DOI: https://doi.org/10.1016/j.snb.2018.11.117
S. Kingchok, P. Nontasorn, K. Laohhasurayotin, N. Traiphol, and R. Traiphol, “Reversible thermochromic polydiacetylene/ zinc-aluminium layered double hydroxides nanocomposites for smart paints and colorimetric sensors: The crucial role of zinc ions,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 610, p. 125733, 2021. DOI: https://doi.org/10.1016/j.colsurfa.2020.125733
D. E. Wang, J. Yan, J. Jiang, X. Liu, C. Tian, J. Xu, M. S. Yuan, X. Han, and J. Wang, “Polydiacetylene liposomes with phenylboronic acid tags: A fluorescence turn-on sensor for sialic acid detection and cell-surface glycan imaging,” Nanoscale, vol. 10, no. 9, pp. 4570-4578, 2018. DOI: https://doi.org/10.1039/C7NR08557E
C. Khanantong, N. Charoenthai, T. Phuangkaew, F. Kielar, N. Traiphol, and R. Traiphol, “Phase transition, structure and color-transition behaviors of monocarboxylic diacetylene and polydiacetylene assemblies: The opposite effects of alkyl chain length,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 553, pp. 337-348, 2018. DOI: https://doi.org/10.1016/j.colsurfa.2018.05.081
M. Weston, R. P. Kuchel, M. Çiftçi, C. Boyer, and R. Chandrawati, “A polydiacetylene-based colorimetric sensor as an active use-by date indicator for milk,” Journal of Colloid and Interface Science, vol. 572, pp. 31-38, 2020. DOI: https://doi.org/10.1016/j.jcis.2020.03.040
X. Chen, G. Zhou, X. Peng, and J. Yoon, “Biosensors and chemosensors based on the optical responses of poly-diacetylenes,” Chemical Society Reviews, vol. 41, no. 13, p. 4610, 2012. DOI: https://doi.org/10.1039/c2cs35055f
B. Yoon, S. Lee, and J.-M. Kim, “Recent conceptual and technological advances in polydiacetylene-based supramolecular chemosensors,” Chemical Society Reviews, vol. 38, no. 7, p. 1958, 2009. DOI: https://doi.org/10.1039/b819539k
W. Ngampeungpis, G. Tumcharern, P. Pienpinijtham, and M. Sukwattanasinitt, “Colorimetric UV sensors with tunable sensitivity from diacetylenes,” Dyes and Pigments, vol. 101, pp. 103-108, 2014. DOI: https://doi.org/10.1016/j.dyepig.2013.09.033
Y. Tokura, S. Nishikawa, and T. Koda, “Photo-induced structural disorder in Langmuir-Blodgett films of polydiacetylenes,” Solid State Communications, vol. 59, no. 6, pp. 393-395, 1986. DOI: https://doi.org/10.1016/0038-1098(86)90570-3
A. Pankaew, N. Traiphol, and R. Traiphol, “Tuning the sensitivity of polydiacetylene-based colorimetric sensors to UV light and cationic surfactant by co-assembling with various polymers,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 608, p. 125626, 2021. DOI: https://doi.org/10.1016/j.colsurfa.2020.125626
Y. S. Soliman, A. A. Abdel-Fattah, A. M. Hamed, and A. M. M. Bayomi, “A radiation-sensitive monomer of 2,4-hexadiyn-1,6-bis(p-toluene sulphonyl urethane) in PVA as a radiochromic film dosimeter,” Radiation Physics and Chemistry, vol. 144, pp. 56-62, 2018. DOI: https://doi.org/10.1016/j.radphyschem.2017.11.012
P. Sun, Y. Fu, J. Hu, N. Hao, W. Huang, and B. Jiang, “Development and dosimetric evaluation of radiochromic PCDA vesicle gel dosimeters,” Radiation Measurements, vol. 85, pp. 116-125, 2016. DOI: https://doi.org/10.1016/j.radmeas.2015.12.037
A. A. Abdel-Fattah, F. Abdel-Rehim, and Y. S. Soliman, “A new label dosimetry system based on pentacosa-diynoic acid monomer for low dose applications,” Radiation Physics and Chemistry, vol. 81, no. 1, pp. 70-76, 2012. DOI: https://doi.org/10.1016/j.radphyschem.2011.08.011
N. Charoenthai, T. Pattanatornchai, S. Wacharasindhu, M. Sukwattanasinitt, and R. Traiphol, “Roles of head group architecture and side chain length on colorimetric response of polydiacetylene vesicles to temperature, ethanol and pH,” Journal of Colloid and Interface Science, vol. 360, no. 2, pp. 565-573, 2011. DOI: https://doi.org/10.1016/j.jcis.2011.04.109
D. J. Ahn, S. Lee, and J. M. Kim, “Rational design of conjugated polymer supramolecules with tunable colorimetric responses,” Advanced Functional Materials, vol. 19, no. 10, pp. 1483-1496, 2009. DOI: https://doi.org/10.1002/adfm.200801074
S. Kingchok, J. Siriboon, L. Sun, T. a. P. Seery, N. Traiphol, and R. Traiphol, “Polydiacetylene-NA+ nanoribbons for naked eye detection of hydrogen chloride gas,” ACS Applied Nano Materials, vol. 5, no. 3, pp. 4146-4156, 2022. DOI: https://doi.org/10.1021/acsanm.2c00087
A. Wu, C. Beck, Y. Ye, J. F. Federici, and Z. Iqbal, “Thermochromism in Polydiacetylene–ZnO nanocomposites,” Journal of Physical Chemistry C, p. 19593-19600, 2013. DOI: https://doi.org/10.1021/jp403939p
N. Traiphol, N. Rungruangviriya, R. Potai, and R. Traiphol, “Stable polydiacetylene/ZnO nanocomposites with two-steps reversible and irreversible thermochromism: The influence of strong surface anchoring,” Journal of Colloid and Interface Science, vol. 356, no. 2, pp. 481-489, 2011. DOI: https://doi.org/10.1016/j.jcis.2011.01.028
N. Traiphol, A. Chanakul, A. Kamphan, and R. Traiphol, “Role of Zn2+ ion on the formation of reversible thermo-chromic polydiacetylene/zinc oxide nanocomposites,” Thin Solid Films, vol. 622, pp. 122-129, 2017. DOI: https://doi.org/10.1016/j.tsf.2016.12.037
A. Wu, Y. Gu, H. Tian, J. F. Federici, and Z. Iqbal, “Effect of alkyl chain length on chemical sensing of polydiacetylene and polydiacetylene/ZnO nanocomposites,” Colloid and Polymer Science, vol. 292, no. 12, pp. 3137-3146, 2014. DOI: https://doi.org/10.1007/s00396-014-3365-y
N. Phonchai, C. Khanantong, F. Kielar, R. Traiphol, and N. Traiphol, “Enhancing thermal and chemical sensitivity of polydiacetylene colorimetric sensors: The opposite effect of zinc oxide nanoparticles,” Colloids and Surfaces A: Physico-chemical and Engineering Aspects, vol. 589, p. 124459, 2020. DOI: https://doi.org/10.1016/j.colsurfa.2020.124459
N. Traiphol, K. Faisadcha, R. Potai, and R. Traiphol, “Fine tuning the color-transition temperature of thermoreversible polydiacetylene/zinc oxide nanocomposites: The effect of photo-polymerization time,” Journal of Colloid and Interface Science, vol. 439, pp. 105-111, 2015. DOI: https://doi.org/10.1016/j.jcis.2014.10.033
A. Kamphan, N. Traiphol, and R. Traiphol, “Versatile route to prepare reversible thermochromic polydiacetylene nano-composite using low molecular weight poly(vinylpyrrolidone),” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 497, pp. 370-377, 2016. DOI: https://doi.org/10.1016/j.colsurfa.2016.03.041
S. Jeon, B. Yoon, and J.-M. Kim, “Polymerization temperature-dependent thermochromism of polydiacetylene,” Bulletin of the Korean Chemical Society, vol. 36, no. 8, pp. 1949-1950, 2015. DOI: https://doi.org/10.1002/bkcs.10393
J. Tang, M. Weston, R. P. Kuchel, F. Lisi, K. Liang, and R. Chandrawati, “Fabrication of polydiacetylene particles using a solvent injection method,” Materials Advances, vol. 1, no. 6, pp. 1745-1752, 2020. DOI: https://doi.org/10.1039/D0MA00442A
A. Chanakul, R. Saymung, S. Seetha, R. Traiphol, and N. Traiphol, “Solution-mixing method for large-scale production of reversible thermochromic and acid/base-colorimetric sensors,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 615, p. 126241, 2021. DOI: https://doi.org/10.1016/j.colsurfa.2021.126241
Z. Yin, S. Li, X. Li, W. Shi, W. Liu, Z. Gao, M. Tao, C. Ma and Y Liu., “A review on the synthesis of metal oxide nano-materials by microwave induced solution combustion,” RSC Advances, vol. 13, no. 5, pp. 3265-3277, 2023. DOI: https://doi.org/10.1039/D2RA07936D
R. Al-Gaashani, S. Radiman, N. Tabet, and A. R. Daud, “Effect of microwave power on the morphology and optical property of zinc oxide nano-structures prepared via a microwave-assisted aqueous solution method,” Materials Chemistry and Physics, vol. 125, no. 3, pp. 846-852, 2011. DOI: https://doi.org/10.1016/j.matchemphys.2010.09.038
Á. Díaz‐Ortiz, P. Prieto, and A. De La Hoz, “A critical overview on the effect of microwave irradiation in organic synthesis,” The Chemical Record, vol. 19, no. 1, pp. 85-97, 2018. DOI: https://doi.org/10.1002/tcr.201800059
V. Polshettiwar, M. N. Nadagouda, and R. S. Varma, “Microwave-assisted chemistry: A rapid and sustainable route to synthesis of organics and nanomaterials,” Australian Journal of Chemistry, vol. 62, no. 1, p. 16, 2009. DOI: https://doi.org/10.1071/CH08404
M. Nüchter, B. Ondruschka, W. Bonrath, and A. Gum, “Microwave assisted synthesis – A critical technology overview,” Green Chemistry, vol. 6, no. 3, pp. 128-141, 2004. DOI: https://doi.org/10.1039/B310502D
L. М. Kustov and К. В. Vikanova, “Synthesis of metal nano-particles under microwave irradiation: Get much with less energy,” Metals, vol. 13, no. 10, p. 1714, 2023. DOI: https://doi.org/10.3390/met13101714
A. O. Adeola, M. P. Duarte, and R. Naccache, “Microwave-assisted synthesis of carbon-based nanomaterials from biobased resources for water treatment applications: emerging trends and prospects,” Frontiers in Carbon, vol. 2, 2023. DOI: https://doi.org/10.3389/frcrb.2023.1220021
S. N. Nyamu, L. M. Ombaka, E. Masika, and M. Ng’ang’a, “One‐pot microwave‐assisted synthesis of size‐dependent l‐glutathione‐capped spherical silver nanoparticles suitable for materials with antibacterial properties,” Journal of Inter-disciplinary Nanomedicine, vol. 4, no. 3, pp. 86-94, 2019. DOI: https://doi.org/10.1002/jin2.62
A. Das and B. K. Banik, “Foundational principles of microwave chemistry,” in Elsevier eBooks, 2021, pp. 3-26. DOI: https://doi.org/10.1016/B978-0-12-822895-1.00005-9
M. Weston, M. A. T. Phan, J. Arcot, and R. Chandrawati, “Anthocyanin-based sensors derived from food waste as an active use-by date indicator for milk,” Food Chemistry, vol. 326, p. 127017, 2020. DOI: https://doi.org/10.1016/j.foodchem.2020.127017
C. Khanantong, N. Charoenthai, S. Wacharasindhu, M. Sukwattanasinitt, N. Traiphol, and R. Traiphol, “Influences of solvent media on chain organization and thermochromic behaviors of polydiacetylene assemblies prepared from monomer with symmetric alkyl tails,” Journal of Industrial and Engineering Chemistry, vol. 58, pp. 258-265, 2018. DOI: https://doi.org/10.1016/j.jiec.2017.09.035
C. Khanantong, N. Charoenthai, F. Kielar, N. Traiphol, and R. Traiphol, “Influences of bulky aromatic head group on morphology, structure and color-transition behaviors of poly-diacetylene assemblies upon exposure to thermal and chemical stimuli,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 561, pp. 226-235, 2019. DOI: https://doi.org/10.1016/j.colsurfa.2018.10.076
A. Kumar, Y. Kuang, Z. Liang, and X. Sun, “Microwave chemistry, recent advancements, and eco-friendly microwave- assisted synthesis of nanoarchitectures and their applications: a review,” Materials Today Nano, vol. 11, p. 100076, 2020. DOI: https://doi.org/10.1016/j.mtnano.2020.100076
N. H. Hoang, V. N. Nguyen, T. T. Nguyen, and T. M. ‐d. Nguyen, “Impact of microwave synthesis time on the shape of silver nanostructures and their antibacterial activity,” Journal of Metals, Materials and Minerals, vol. 33, no. 1, pp. 101-106, 2023. DOI: https://doi.org/10.55713/jmmm.v33i1.1631
A. Chanakul, N. Traiphol, and R. Traiphol, “Controlling the reversible thermochromism of polydiacetylene/zinc oxide nanocomposites by varying alkyl chain length,” Journal of Colloid and Interface Science, vol. 389, no. 1, pp. 106-114, 2013. DOI: https://doi.org/10.1016/j.jcis.2012.08.066
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2024 วารสารโลหะ, วัสดุ และแร่
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
