Pickling kinetics of tertiary oxide scale formed on hot-rolled steel strip

ผู้แต่ง

  • Yubonrat Jatuphaksamphan Faculty of Engineering, Chulalongkorn University
  • Natthapong Phinichka Faculty of Science, Srinakharinwirot University
  • Kritsada Prapakorn National Metal and Materials Technology Center, Klong Luang
  • Mawin Supradist Faculty of Engineering, Chulalongkorn University

คำสำคัญ:

Oxide scale, Hot-rolled steel strip, Scale dissolution rate

บทคัดย่อ

During hot rolling process a steel strip covers with oxide scales. These scales have to be removed by acid pickling process. This work focuses on the study of the scale removing rate of a hot-rolled steel strip in order to find an expression explaining the rate of reaction in hydrochloric acid. The study of scale removal is accomplished by utilizing the pickling simulator with different acid concentrations and pickling temperatures.

There are two approaches that can be used to find a scale removing rate; the measurement of weight change and the iron concentration change after the pickling process. In this work, the measurement of the change of iron concentration was selected because it represents the actual amount of the scale removed after the pickling process. The experimental data were used to derive the expression for the rate constants. By using these expressions, the pickling equations can be obtained. These equations are capable of predicting the maximum removable scale thickness during the pickling process for several pickling conditions; i.e. time needed for scale removal.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Chen, R.Y. and Yuen, W.Y.D. 1999. Effects of finishing and coiling temperatures on the scale structure and picklability of hot-rolled strip. 41st MWSP Conf. Proc. 37 : 697-705.

Chen, R.Y. and Yuen, W.Y.D. 2000. A study of the scale structure of hot-rolled steel strip by simulated coiling and cooling. Oxid. Met. 53(5-6) : 539-560.

Chen, R.Y. and Yuen, W.Y.D. 2001. Oxide-scale structures formed on commercial hot-rolled steel strip and their formation mechanisms. Oxid. Met. 56(1-2): 89-118.

Chen, R.Y. and Yuen, W.Y.D. 2002. Oxidation of low-carbon, low-silicon mild steel at 450-900°C under conditions relevant to hot-strip processing. Oxid. Met. 57 : 53-79.

Chen, R.Y. and Yuen, W.Y.D. 2002. On the pickling mechanisms of hot-rolled steel strip. 44th MWSP Conf. Proc. 40 : 1077-1089.

Chen, R.Y. and Yuen, W.Y.D. 2003. Review of the high-temperature oxidation of iron and carbon steels in air of oxygen. Oxid. Met. 59(6) : 433-468.

Chen, R.Y., Yuen, W.Y.D. and Hull, R. 2003. Effects of hot rolling conditions and scale breaking on the pickling performance of hot-rolled steel strip. SEAISI Q. 29 : 68-82.

Chen, R.Y., Yuen, W.Y.D. and Mak, T. 2001. Oxide scale growth and its pickling characteristics of hot-rolled steel strip. 43rd MWSP Conf. Proc. 39 : 287-299.

Hudson, R.M. 1982. Pickling and Descaling. In : ASM Handbook. 9th ed. 5 : 68-82.

Kizu, T., Nagataki,Y., Inazumi, T. and Hosoya Y. 2001. Effects of chemical composition and oxidation temperature on the adhesion of scale in plain carbon steels. ISIJ Int. 41 : 1494-1501.

Yamaguchi, S., Yoshida, T. and Saito, T. 1994. Improvement in descaling of hot strip by hydrochloric acid. ISIJ Int. 34(8) : 670-678.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-15

วิธีการอ้างอิง

[1]
Y. Jatuphaksamphan, N. Phinichka, K. . Prapakorn, และ M. Supradist, “Pickling kinetics of tertiary oxide scale formed on hot-rolled steel strip”, J Met Mater Miner, ปี 20, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 20 ฉบับที่ 1 (2010)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.