Physical properties of polyolefin/bamboo charcoal composites

ผู้แต่ง

  • Siriwan Kittinaovarat Faculty of Science, Chulalongkorn University
  • Worawat Suthamnoi Faculty of Science, Chulalongkorn University

คำสำคัญ:

Polyolefin, Bamboo charcoal, Composite, Polypropylene, Polyethylene

บทคัดย่อ

The physical properties of two kinds of polyolefin/bamboo charcoal composites, based upon polypropylene (PP) and low density polyethylene (LDPE), were studied for varying levels of charcoal inclusion between 0 and 20 phr. A Brabender mixer and two-roll mill were used for the mixing process of both polyolefin and bamboo charcoal composites, followed by compression moulding of the homogeneous mixtures to form the composite materials. The tensile strength and Young’s modulus were both found to increase, whilst the elongation at break decreased, in a dose-dependent manner with increasing bamboo charcoal content in the composite materials. The tensile strength of PP/bamboo charcoal composites was higher than that of the original PP, but the tensile strength of LDPE/bamboo charcoal composites was slightly lower than that of LDPE. In addition, the water absorption of both polyolefin/bamboo charcoal composite series were significantly higher than that of either original polyolefin. Finally, the electrical resistance of both polyolefin/bamboo charcoal composites decreased compared to that of pure PP and LDPE.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Superribbon. The major characteristics of bamboo charcoal [online]. Available from: http://www.superribbon.com [2006, July 18].

Asada, T., Ohkubo, T., Kawata, K., and Oilawa, K. 2006. Ammonia Adsorption on Bamboo Charcoal with Acid Treatment. J. Health. Sci. 52 : 585-589.

Ohe, K., Nagae, Y., Nakamura, S., and BABA, Y. 2003. Removal of Nitrate Anion by Carbonaceous Materials Prepared from Bamboo and Coconut Shell. J. Chem. Eng. Jpn. 36 : 511-515.

Nam, P. H., Pralay, M., Masami, O., Tadao, K., Naoki, H. and Arimitsu, U. 2001. A Hierarchical Structure and Properties of Intercalated Polypropylene/clay Nanocomposites. Polymer. 42 : 9633-9640.

Mingliang, G. and Demin, J. 2009. Preparation and Properties of Polypropylene/clay Nanocomposites using an Organoclay Modified through Solid State Method. J. Reinf. Plast. Compos. 28 : 5-16.

Yui, H., Wu, G., Sano, H., Sumita, M. and Kino, K. 2006. Morphology and electrical Conductivity of Injection-molded Polypropylene/Carbon Black Composites with Addition of Highdensity Polyethylene. Polymer. 47 : 3599- 3608.

Lou, C.W., Lin, C.W., Lei, C.H, Su, K. H., Hsu, C. H., Liu, Z.H. and Lon, J.H. 2007. PET/PP Blend with Bamboo Charcoal to Produce Functional Composites. J. Mater. Process. Tech. 192 : 428-433.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-15

วิธีการอ้างอิง

[1]
S. . Kittinaovarat และ W. Suthamnoi, “Physical properties of polyolefin/bamboo charcoal composites”, J Met Mater Miner, ปี 19, ฉบับที่ 1, เม.ย. 2017.

ฉบับ

ปีที่ 19 ฉบับที่ 1 (2009)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.