A Bi-Mn based ceramic with tunable electrical properties for high temperature NTC-thermistor application

Nusrat ZAHAN; Praveen Priyaranjan NAYAK; Rashmi Rani PATRO; Siddharth SAHANY; Debasish PANDA; Om Prakash DAS; Sushansu Sekhar HOTA

doi:10.55713/jmmm.v37i1.2496

ผู้แต่ง

Nusrat ZAHAN Faculty of Engineering and Technology, SOA University, BBSR, India
Praveen Priyaranjan NAYAK Faculty of Engineering and Technology, SOA University, BBSR, India
Rashmi Rani PATRO Department of Computer Science & Information Technology (CSIT), GITA Autonomous College, BBSR, India
Siddharth SAHANY Faculty of Engineering and Technology, SOA University, BBSR, India
Debasish PANDA Department of Physics, SOA University, BBSR, India
Om Prakash DAS Faculty of Engineering and Technology, SOA University, BBSR, India
Sushansu Sekhar HOTA Department of Physics, SOA University, BBSR, India

DOI:

https://doi.org/10.55713/jmmm.v37i1.2496

คำสำคัญ:

BiMn2O5-Sillenite, Barium strontium titanate(Ba1-xSrxTiO3), Dielectric constant, electric properties, BST, High-T thermistor, Impedance

บทคัดย่อ

This article presents detailed structural and electrical properties of BiMn₂O₅-Sillenite biphasic ceramic synthesized via solid state reaction technique. The weight percentage of BiMn₂O₅ and Bi₂₅Mn₂O₄₀ are found to be 90.121 ± 1.900 and 9.878 ± 0.022, respectively. The scanning electron microscope image of the composite material that reflects the presence of polycrystalline nature having the average grain size (G_avg) 1.22 µm. The topographic grain behaviour shows the presence of high intense grains nature of the material surface. We investigated relaxation processes, ionic hopping, transport mechanisms, and semiconducting properties by studying the dielectric, conductivity, modulus, and impedance spectra over a broad frequency range (1 kHz to 1 MHz) and temperatures from 25°C to 500°C. The thermistor constant (β) is 2053.8, and the temperature coefficient of resistance (TCR) is found to be ‒0.00253 which confirms the suitable NTC properties. The NTC behaviour confirms the material is very good candidate for high-T thermistor component.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

D. Maurya, F. C. Sun, S. P. Alpay, and S. Priya, “A new method for achieving enhanced dielectric response over a wide temperature range,” Scientific reports, vol. 5, no. 1, p. 15144, 2015. DOI: https://doi.org/10.1038/srep15144

C. Sun, J. A. Alonso, and J. Bian, “Recent advances in perovskite-type oxides for energy conversion and storage applications,” Advanced Energy Materials, vol. 11, no. 2, p. 2000459, 2021. DOI: https://doi.org/10.1002/aenm.202000459

N. Hur, S. Park, P. A. Sharma, S. Guha, and S. W. Cheong, “Colossal magnetodielectric effects in DyMn2O5,” Physical review letters, vol. 93, no. 10, p. 107207, 2004. DOI: https://doi.org/10.1103/PhysRevLett.93.107207

N. E. Massa, A. F. García-Flores, D. D. S. Meneses, L. Del Campo, P. Echegut, G. F. Fabbris, M. J. Martinez-Lope, and J. A. Alonso, “Collective phase-like mode and the role of lattice distortions at TN ∼ TC in RMn2O5 (R= Pr, Sm, Gd, Tb, Bi),” Journal of Physics: Condensed Matter, vol. 24, no. 19, p. 195901, 2012. DOI: https://doi.org/10.1088/0953-8984/24/19/195901

A. F. Garcia-Flores, E. Granado, H. Martinho, R. R. Urbano, C. Rettori, E. I. Golovenchits, V. A. Sanina, S. B. Oseroff, and S. W. Cheong," Anomalous phonon shifs in the paramagnetic phase of multiferroic RMn2O5 (R-Bi, Eu, Dy): Possible manifestations of unconventional magnetic correlations," Physical Review B, vol. 73, no. 10, p. 104411, 2006. DOI: https://doi.org/10.1103/PhysRevB.73.104411

K. S. Kumar, and C. Venkateswaran, “Effect of Fe substitution on the magnetic properties of BiMn2O5,” Journal of Physics D: Applied Physics, vol. 44, no. 32, p. 325001, 2011. DOI: https://doi.org/10.1088/0022-3727/44/32/325001

I. D. Zhitomirskii, N. E. Skorokhodov, A. A. Bush, O. I. Chechernikova, V. F. Chuprakov, and Y. N. Venevtsev, “Dielectric, pyroelectric and magnetic properties of BiMn2O5 crystals,” Fizika Tverdogo Tela, vol. 25, no. 3, pp. 953‒955, 1983.

Z. H. Sun, B. L. Cheng, S. Dai, K. J. Jin, Y. L. Zhou, H. B. Lu, Z. H. Chen, and G. Z. Yang, “Effect of Ce substitution on magnetic and dielectric properties of BiMn2O5,” Journal of applied physics, vol. 99, no. 8, p. 084105, 2006. DOI: https://doi.org/10.1063/1.2190716

R. A. Ferreira, M. E. Dos Santos, C. Morilla-Santos, R. Lebullenger, O. Peña, and P. N. Lisboa-Filho, “Effect of Eu substitution on the crystallographic and magnetic properties of the BiMn2O5 oxide obtained by urea combustion,” Ceramics International, vol. 40, no. 8, pp. 13643‒13648, 2014. DOI: https://doi.org/10.1016/j.ceramint.2014.05.091

D. K. Shukla, S. Mollah, R. Kumar, P. Thakur, K. H. Chae, W. K. Choi, and A. Banerjee, “Effect of Ti substitution on multi-ferroic properties of BiMn2O5,” Journal of Applied Physics, vol. 104, no. 3, p. 033707, 2008. DOI: https://doi.org/10.1063/1.2964072

K. Annamalai, R. Radha, S. E. Kichanov, M. Navaneethan, and S. Balakumar, “Ice bath assisted BiMn2O5(Mullite) Phase synthesis, structural and compositional analysis under different Bi concentration,” ECS Journal of Solid State Science and Technology, vol. 10, no. 6, p. 061001, 2021. DOI: https://doi.org/10.1149/2162-8777/ac040c

T. I. Mel’nikova, G. M. Kuz’micheva, V. B. Rybakov, N. B. Bolotina, and A. B. Dubovsky, “Synthesis, composition, and structure of sillenite-type solid solutions in the Bi2O3− SiO2− MnO2 system,” Inorganic Chemistry, vol. 50, no. 5, pp. 2002‒2009, 2011. DOI: https://doi.org/10.1021/ic1018778

R. Shukla, P. Saha, A. B. Shinde, P. S. R. Krishna, P. D. Babu, A. K. Tyagi, S. N. Achary, D. Santamaria-Perez, T. Marqueno, J. Ruiz-Fuertes, C. Popescu, and D. Errandonea, “On formation and evolution of structure of sillenite type Bi25FeO40 phase with temperature and pressure,” Journal of Alloys and Compounds,

vol. 1020, p. 179528, 2025. DOI: https://doi.org/10.1016/j.jallcom.2025.179528

J. Xue, H. Zhang, J. Han, and Y. Ling, “Thermal, magnetic and photoelectrical behaviors of sillenite Bi25FeO39 microcrystals,”

Ceramics International, vol. 47, no. 7, pp. 9941‒9947, 2021. DOI: https://doi.org/10.1016/j.ceramint.2020.12.138

J. S. Cha, and K. Park, “Sol-gel synthesis, microstructure, and thermoelectric properties of Ca2.8-xBixDy0.2Co4O9+δ,” Ceramics International, vol. 43, no. 18, pp. 16159‒16166, 2017. DOI: https://doi.org/10.1016/j.ceramint.2017.08.191

J. Hansen, “Assessing the tribological interface of mechanical parts,” Surface Newsletter (Digital Surf), pp. 6‒7, 2020.

D. Panda, S. S. Hota, and R. N. P. Choudhary, “Investigation of structural, topological, and electrical properties of scheelite strontium molybdate for electronic devices,” Inorganic Chemistry Communications, vol. 158, p. 111501, 2023. DOI: https://doi.org/10.1016/j.inoche.2023.111501

D. Panda, S. S. Hota, and R. N. P. Choudhary, “Investigation of the structural, surface topographical, fractal, capacitive, and electrical properties of a defect brownmillerite perovskite material KBiFeMnO5 for electronic devices,” RSC advances, vol. 14, no. 5, pp. 3400‒3412, 2024. DOI: https://doi.org/10.1039/D3RA08106K

C. R. Mariappan, “AC conductivity scaling behavior in grain and grain boundary response regime of fast lithium ionic conductors,” Applied Physics A, vol. 117, pp. 847‒852, 2014. DOI: https://doi.org/10.1007/s00339-014-8440-1

M. B. Bechir, M. Akermi, and H. J. Alathlawi,” Understanding charge transport and dielectric relaxation properties in lead-free Cs2ZrCl6 nanoparticles,” RSC advances, vol. 14, no. 20, pp. 14221‒14232, 2024. DOI: https://doi.org/10.1039/D4RA02031F

S. S. Hota, D. Panda, L. Biswal, S. Joshi, A. Shukla, and R. N. P. Choudhary, “Effect of milling time on structural and electrical properties of thermomechanically synthesized of Ba0.1(Bi0.45Na0.45) TiO3 nanoceramics for ferroelectric random-access memory device,” Journal of Alloys and Compounds, vol. 1010, p. 177041, 2025. DOI: https://doi.org/10.1016/j.jallcom.2024.177041

S. S. Hota, D. Panda, and R. N. P. Choudhary, “Structural, dielectric, electrical, and leakage current properties of SrWO4 for electronic devices,” Journal of the Korean Ceramic Society, vol. 61, no. 6, pp. 1207‒1221, 2024. DOI: https://doi.org/10.1007/s43207-024-00438-1

D. Panda, S. S. Hota, and R. N. P. Choudhary, “Development of lead‐free defect brownmillerite perovskite ceramic LiBiFeMnO5 solid solution for electronic devices,” Advanced Engineering Materials, vol. 26, no. 20, p. 2400010, 2024. DOI: https://doi.org/10.1002/adem.202400010

R. Wu, Z. Fu, Y. Liu, Y. Wei, H. Sun, A. Chang, and B. Zhang, “Widening the temperature range and improving the linearity of CaCu3Ti4O12 ceramics for high-temperature NTC thermistor application through entropy engineering strategy,” Journal of Alloys and Compounds, vol. 973, p. 172908, 2024. DOI: https://doi.org/10.1016/j.jallcom.2023.172908

P. Agnihotri, R. Rai, S. Kumari, and R. Goel, “Exploring NTC thermistor properties of La0.665Bi0.33Ba0.005Gd1-xMnxO3,” Transactions on Electrical and Electronic Materials, vol. 26, pp. 573‒589, 2025. DOI: https://doi.org/10.1007/s42341-025-00612-0

H. Xiao, C. Liu, T. Zheng, Y. Liu, and Y. Lyu, “(1-x)Ni0.9 Mn2.1 O4-xLaCr0.6Mn0.4O3 composite ceramic with controllable electrical properties for low resistance NTC thermistors,” Journal of Alloys and Compounds, vol. 1000, p. 175085, 2024. DOI: https://doi.org/10.1016/j.jallcom.2024.175085

L. Wu, J. Wang, G. Lan, W. Li, P. Meng, and S. Jia, “BaTiO3-BiMnO3 perovskite NTC thermistors for high-temperature batteries,” Journal of Alloys and Compounds, vol. 1011, p. 178396, 2025. DOI: https://doi.org/10.1016/j.jallcom.2024.178396