Ferroelectric glass-ceramic sintering aid for lead titanate ceramics

ผู้แต่ง

  • Pat Sooksaen Faculty of Engineering and Industrial Technology, Silpakorn University
  • Ian M Reaney Department of Engineering Materials, Sir Robert Hadfield Building
  • Derek C Sinclair Department of Engineering Materials, Sir Robert Hadfield Building

คำสำคัญ:

lead titanate, glass-ceramics, sintering aids, dielectric, impedance spectroscopy

บทคัดย่อ

Silicate-based glass that devitrifies on heating to form ferroelectric lead titanate has been developed. The potential for use as sintering aid in PbO-based electroceramics has been evaluated by studying the densification of PbTiO3 (PT) with increasing wt% addition of glass powder. As the wt% glass content increased, the density increased, the maximum and room temperature relative permittivity decreased and there was also a decrease in Tc and the c/a ratio. The decrease in Tc is believed to be due to increased clamping from neighbouring grains as the density of the PT increases. The decrease in maximum and room temperature relative permittivity is related to the presence of secondary phases.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Corker, D.L., Whatmore, R.W., Ringgaard, E. and Wolny, W.W. 2000. Liquid-phase sintering of PZT ceramics. J. Europ. Ceram. Soc. 20(12) : 2039 – 2045.

Chowdary, K.R. and Subbarao, E.C. 1981. Ferroelectrics. 37 : 689

Desgardin, G., Mey, I. and Raveau, B. 1985. Am. Ceram. Soc Bull. 64(4) : 560.

Sarkar, S.K. and Sharma, M.L. 1989. Mater. Res. Bull. 24 : 773.

Burn, I. 1982. J. Mater. Sci. 17(5) :1398-1408.

Lines, M.E. and Glass, A.M. 1979. Principles and Applications of Ferroelectrics and Related Materials. Oxford : University Press.

Palkar, V. R., Chattopadhyay, S., Ayyub, P., Multani, M., Paranjape, S.K. and Siruguri, V. 1997. A study of the structure and composition of Si-doped Pb TiO3. Mater. Lett. 32(2-3) :171 – 174.(1997)

Palkar, V. R., Purandare, S. C. and Pinto, R. 2000. Breakthrough in densification of ferroelectric Pb TiO3 with Si as sintering aid. Mater. Lett. 43(5-6) : 329 – 334.

Mendiola, J., Calzada, M.L., Ramos, P., Martin, M.J. and Agullo-Rueda, F. 1998. On the effects of stresses in ferroelectric (Pb, Ca) TiO3 thin films. Thin Solid Films. 315 (1- 2) : 195 – 201.

Tickoo, R., Tandon, R.P., Bamzai, K.K. and Kotru, P.N. 2003. Dielectric and piezoelectric characteristics of samarium modified lead titanate ceramics. Mater. Sci. Eng. B – Solid State Materials for Advanced Technology. 103(2) : 145 – 151.

Chu, S.Y. and Chen, T.Y. 2003. J. Europ. Ceram. Soc. 24 : 1993.

Shyu, J. J. and Yang, Y.S. J.Am. Ceram. Soc. 78(6) : 1463.

Sooksaen, P., Reaney, I.M. and Sinclair, D.C. 2005. Lead titanate glass-ceramics derived from a silicate-based melt. J. Mater. Res. 20(5) : 1316 – 1323.

Morrison, F. D., Sinclair D. C. and West, A. R. 2001. Characterization of lanthanumdoped barium titanate ceramics using impedance spectroscopy. J. Am. Ceram. Soc. 84(3) : 531 – 538.

ดาวน์โหลด

เผยแพร่แล้ว

2017-04-23

วิธีการอ้างอิง

[1]
P. . Sooksaen, I. M. Reaney, และ D. C. . Sinclair, “Ferroelectric glass-ceramic sintering aid for lead titanate ceramics”, J Met Mater Miner, ปี 17, ฉบับที่ 2, เม.ย. 2017.

ฉบับ

บท

Original Research Articles