Water soluble chitosan as an environment-friendly coagulant in removal of rubber particles from skim rubber latex
คำสำคัญ:
Chitosan, skim rubber latex, coagulation, flocculationบทคัดย่อ
Water soluble chitosan, dissolved in hot deionized water to obtain 0.8% solution, was used for the coagulation-flocculation of skim natural rubber latex. The efficiency of coagulation-flocculation of skim rubber latex without pH adjustment was much poorer than that of neutral skim rubber latex. When adding chitosan solution to the neutral skim rubber latex with a rubber content of 5.300 %wt/vol until the concentration of chitosan in the dispersion was 0.107%, the phase separation between rubber particles and yellow serum was clearly observed. At this condition, the removal efficiency of skim rubber particles was found to be the best among all trials. It was also found that dilution of skim rubber latex with deionized water did not increase the removal efficiency.Downloads
เอกสารอ้างอิง
Allan, G. G. and Peyron, M. 1995. Molecular weight manipulation of Chitosan. Carbohydr. Res. 277 : 257-283.
Guibal, E. and Roussy, J. 2007. Coagulation and flocculation of dye-containing solutions using a biopolymer (Chitosan). React. Funct. Polym. 76 : 33-42.
Knorr, D. 1984. Use of Chitinous Polymers in Food - A Challenge for Food Research and Development. Food Technol. 38 : 85-97.
Paiphansiri, U. and Tangboriboorat, P. 2005. Prevulcanisation of skim latex: morphology and its use in natural rubber based composite material. Colloid Polym. Sci. 284 : 251-257.
Wang, Q.Z., Chen, X.G., Liu, N., Wang, S.X., Liu, C.S., Meng, X.H. and Liu, C.G. 2006. Protonation constants with different molecular weight and degree of deacetylation. Carbohydr. Polym. 65 : 194-201.
Wu, C.C., Huang, C. and Lee, D.J. 1997. Effects of polymer dosage on alum sludge dewatering characteristics and physical properties. Colloids Surf. A: Physicochemical and Engineering Aspects. 122 : 89-96.
ดาวน์โหลด
เผยแพร่แล้ว
วิธีการอ้างอิง
ฉบับ
บท
การอนุญาต
ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Authors who publish in this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.