Metallographic analysis and electrical resistivity of the 1045 steel after being heat-treated

ผู้แต่ง

  • M. Quiroga Agurto National University of San Marcos
  • E. Medrano Atencio National University of San Marcos
  • F. A. Reyes Navarro National University of San Marcos
  • J. G. Miranda Ramos Universidad Nacional Mayo de San Marcos

คำสำคัญ:

Steel, Electrical resistivity, Quenching, Qustenite, Martensite

บทคัดย่อ

Herein, it was studied the structural evolution of the AISI 1045 steel water-quenched and oilquenched, respectively, from a temperature higher than the critical to various temperatures between 800 and 820°C. The two quenching media were used at 16.5°C.  Microstructural variations occurred in the quenched 1045 steel. Also, by using the four-terminal sensing, it was measured the evolution of the electrical resistivity of the quenched samples; it was found that quenching at different temperatures provoked a complex behavior. It was noticed a major increase in the electrical resistivity in the case of water-quenched samples. Besides, when compared samples before and after being heat-treated, via a metallographic analysis, it was showed an evolution of the phases of steel, what has a link with the evolution of the electrical resistivity, which was measured according to the increase of the austenitizing temperature.

Downloads

Download data is not yet available.

เอกสารอ้างอิง

Akron Steel Treating Company. (1987). Modern Steels and their properties: Carbon and Alloy-Steel Bars and Rods.

S. Klein, L. Mujica Roncery, M. Walter, S. Weber, and W. Theisen. (2017). Diffusion processes during cementite precipitation and their impact on electrical and thermal conductivity of a heat-treatable steel, J. Mater. Sci. 52: 375-390.

I. Akhyar and M. Sayuti. (2015). Effect of heat treatment on hardnessand microstructures of AISI 1045, Advanced Materials Research. 119: 575-579.

K. Gao, X. Qin, Z. Wang, H. Chen, S. Zhu, Y. Liu and Y. Song. (2014). Numerical and experimental analysis of 3D spot induction hardening of AISI 1045 steel. J. Mater. Process. Technol. 214, Iss. 11: 2425-2433.

S. Taghizadeh, A. Safarian, Sh. Jalali and A. Salimiasl. (2013). Developing a model for hardness prediction in waterquenched and quenched AISI 1045 steel through an artificial neural lattice. Materials & Design. 51: 530-535.

A. Kumar Sinha. (2007). Steel namenclature, In Chap. 1 of Steel Heat Treatment Handbook, edited by George E. Totten, CRC press (Taylor & Francis Group).

J. R. Davis (Editor). (1998). Metals Handbook Desk Edition, Second Edition, pp. 153– 173, ASM International.

G. E. Totten (Editor). 2007. Steel Heat Treatment:Equipment and Process Design, CRC press (Taylor & Francis Group).

Y. M. Lajtin. (1973). Metalografía y tratamiento térmico de los metales (Metallography and Heat Treatment of Metals), Editorial Mir.

A. V. Sverdlin and A. R. Ness. (2007). Fundamental concepts in Steel heat treatment, IN Chap. 3 of Steel Heat Teatment Handbook, edited by George E. Totten. CRC press (Taylor & Francis Group).

M. Quiroga Agurto. (2009). Estudio y medida de la resistividad eléctrica del acero 1045 después de un tratamiento térmico (Study and measurement of the electrical resistivity of the 1045 steel after a heat treatment), Licentiate thesis, UNMSM.

Dr. E. J. Dubox. (1974). Prácticas de Metalografia (Metallographic Practices), Ediciones Marymar, Argentina.

A. P. Schuetze, W. Lewis, Ch. Brown and W.J. Geerts (2004). A laboratory on the fourpoint probe technique. Am. J. Phys. 72(2): 149-153.

ASTM International. (1998). Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials. D4496-87.

S. K. Akav, M. Yazici and A. Avinc. (2009). The effect of heat treatments on physical properties of a low carbon steel, Preceedings of the Romanian Academy, Series A, 10(1): 000-000(sic).

ดาวน์โหลด

เผยแพร่แล้ว

2017-06-30

วิธีการอ้างอิง

[1]
M. Quiroga Agurto, E. Medrano Atencio, F. A. Reyes Navarro, และ J. G. Miranda Ramos, “Metallographic analysis and electrical resistivity of the 1045 steel after being heat-treated”, J Met Mater Miner, ปี 27, ฉบับที่ 1, มิ.ย. 2017.

ฉบับ

ปีที่ 27 ฉบับที่ 1 (2017)

บท

Original Research Articles

การอนุญาต

ลิขสิทธิ์ (c) 2017 Journal of Metals, Materials and Minerals

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish in this journal agree to the following terms:

    1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.

 

    1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.